• The Shooting Menus
• [SHOOTING SETTING] (Still Photography)

Enter a search term and click .

Adjust shooting options for still photography.

---

[DRIVE SETTING]

Adjust settings for the various drive modes.

Option	Description
[BKT SETTING]	Choose the settings used when the drive dial is rotated to [BKT] (a[BKT SETTING]).
[CH HIGH SPEED BURST]	Select the frame rate used when the drive dial is rotated to [CH] (continuous high speed). The display frame rate when the electronic shutter is used is 40 fps, or 60 fps in 1.25× crop mode. Options [30fps(1.25X CROP)] R 1 [20fps(1.25X CROP)] R 1 [10fps(1.25X CROP)] R 1 [20fps] R 1 [15fps] 2 [10fps] 1 Available with electronic shutter only. 2 Available with mechanical shutter only.
[CL LOW SPEED BURST]	Select the frame rate used when the drive dial is rotated to [CL] (continuous low speed). Options [3.0fps] [5.0fps] [7.0fps] * [8.0fps] * 6.6 fps with electronic shutter.
[HDR MODE]	Each time the shutter button is pressed, the camera takes three shots, varying exposure each time, and combines them into a single picture. The resulting photograph preserves details in highlights and shadows (aHDR).
[ADV. FILTER SETTING]	Choose the filter used when the drive dial is rotated to [ADV.] (aAdvanced Filters ).

[BKT SETTING]

Choose the bracketing type and adjust bracketing options for the [BKT] drive mode.

[BKT SELECT]

The following options are available when [BKT] is selected for drive mode.

Bracketing type
O[AE BKT]	V[WHITE BALANCE BKT]
W[ISO BKT]	Y[DYNAMIC RANGE BKT]
X[FILM SIMULATION BKT]	Z[FOCUS BKT]

[AE BKT]

The following options are available when O[AE BKT] is chosen for [BKT SELECT].

Option	Description
[FRAMES/ STEP SETTING]	Choose the number of shots in the bracketing sequence and the amount exposure is varied with each shot. [FRAMES]: Choose the number of shots in the bracketing sequence. [STEP]: Choose the amount exposure is varied with each shot.
[1 FRAME/ CONTINUOUS]	Choose whether the shots in the bracketing sequence are taken one at a time or in a single burst. [1 FRAME]: The shots in the bracketing sequence are taken one at a time. [CONTINUOUS]: The shots in the bracketing sequence are taken in a single burst.
[SEQUENCE SETTING]	Choose the order in which the shots are taken.

[ISO BKT]

The following options are available when W[ISO BKT] is chosen for [BKT SELECT].

Options
±1/3	±2/3	± 1

[FILM SIMULATION BKT]

Choose the three film simulation types used for film simulation bracketing (a[FILM SIMULATION]).

[WHITE BALANCE BKT]

The following options are available when V[WHITE BALANCE BKT] is chosen for [BKT SELECT].

Options
± 1	± 2	± 3

[FOCUS BKT SETTING]

Choose from [AUTO] and [MANUAL] focus bracketing modes.

• In [MANUAL] mode, you choose the following.

  Option	Description
  [FRAMES]	Choose the number of shots.
  [STEP]	Choose the amount focus changes with each shot.
  [INTERVAL]	Choose the interval between shots.

  Focus and [FRAMES]/[STEP]

  The relation between focus and the options chosen for [FRAMES] and [STEP] is shown in the illustration.

  

  AStep

  BFrames

  CStarting focus position

  • Focus proceeds from the starting position toward infinity.
  • Small [STEP] values translate to small changes in focus, larger values to larger changes.
  • Regardless of the option chosen for [FRAMES], shooting ends when focus reaches infinity.

• In [AUTO] mode, the camera calculates [FRAMES] and [STEP] automatically.

  1. Select A[SHOOTING SETTING] in the shooting menu, highlight [FOCUS BKT SETTING], and press [MENU/OK].

  2. Select [AUTO] and choose an [INTERVAL].

     The view through the lens will be displayed.

  3. Focus on the nearest end of the subject and press [MENU/OK].

     The selected focus distance appears as [A] on the focus distance indicator.

     

     The same focus range can be chosen by focusing on the farthest end of the subject first.

  4. Focus on the farthest end of the subject and press [DISP/BACK].

     The selected focus distance ([B]) and focus range ([A] to [B]) appear on the focus distance indicator.

     

     Instead of pressing the [DISP/BACK] button, you can press [MENU/OK] and select [A] again.

  5. Take photographs.

     The camera will calculate values for [FRAMES] and [STEP] automatically. The number of frames will appear in the display.

     

[SPORTS FINDER MODE]

Option	Description
[ON]	Pictures are taken using a 1.25× crop, reducing the picture angle by an amount equivalent to increasing lens focal length by 1.25×; the crop is shown by a frame in the display.
[OFF]	The 1.25× crop is disabled.

[PRE-SHOT]sJ

To reduce the lag between your pressing the shutter button all the way down and the resulting picture being recorded to the memory card, the camera starts shooting with the electronic shutter when the shutter button is pressed halfway and saves a series shots starting just before the shutter button is pressed the rest of the way down.

Options
[ON]	[OFF]

[SELF-TIMER]

Choose a shutter release delay.

Option	Description
R[2 SEC]	The shutter is released two seconds after the shutter button is pressed. Use to reduce blur caused by the camera moving when the shutter button is pressed. The self-timer lamp blinks as the timer counts down.
S[10 SEC]	The shutter is released ten seconds after the shutter button is pressed. Use for photographs in which you wish to appear yourself. The self-timer lamp blinks immediately before the picture is taken.
[OFF]	Self-timer off.

[SAVE SELF-TIMER SETTING]

If [ON] is selected, the chosen self-timer setting will remain in effect after a picture is taken or the camera is turned off.

Options
[ON]	[OFF]

[SELF-TIMER LAMP]

If [ON] is selected, the self-timer lamp will light during self-timer photography. Select [OFF] when shooting night scenes or in other situations in which you would prefer that the lamp remain unlit.

Options
[ON]	[OFF]

[INTERVAL TIMER SHOOTING]

Configure the camera to take photos automatically at a preset interval.

1. Highlight [INTERVAL TIMER SHOOTING] in the A([SHOOTING SETTING]) tab and press [MENU/OK].

   

2. Use the selector to choose the interval and number of shots. Press [MENU/OK] to proceed.

   

3. Use the selector to choose the starting time and then press [MENU/OK]. Shooting will start automatically.

   

[INTERVAL TIMER SHOOTING EXPOSURE SMOOTHING]

Select [ON] to automatically adjust exposure during interval-timer photography to prevent it changing dramatically between shots.

Options
[ON]	[OFF]

[PHOTOMETRY]

Choose how the camera meters exposure.

Mode	Description
o[MULTI]	The camera instantly determines exposure based on an analysis of composition, color, and brightness distribution. Recommended in most situations.
p[CENTER-WEIGHTED]	The camera meters the entire frame but assigns the greatest weight to the area at the center.
v[SPOT]	The camera meters lighting conditions in an area at the center of the frame equivalent to 2% of the total. Recommended with backlit subjects and in other cases in which the background is much brighter or darker than the main subject.
w[AVERAGE]	Exposure is set to the average for the entire frame. Provides consistent exposure across multiple shots with the same lighting, and is particularly effective for landscapes and portraits of subjects dressed in black or white.

[SHUTTER TYPE]

Choose the shutter type. Choose the electronic shutter to mute the shutter sound.

Option	Description
t[MECHANICAL SHUTTER]	Take pictures with the mechanical shutter.
s[ELECTRONIC SHUTTER]	Take pictures with the electronic shutter.
t[E-FRONT CURTAIN SHUTTER]	The camera chooses the mechanical or electronic front curtain shutter according to shooting conditions.
u[MECHANICAL + ELECTRONIC]	The camera chooses the mechanical or electronic shutter according to shooting conditions.
v[E-FRONT + MECHANICAL]	The camera chooses the mechanical or electronic front curtain shutter according to shooting conditions.
w[E-FRONT + MECHANICAL + ELECTRONIC]	The camera chooses the mechanical, electronic, or electronic front curtain shutter according to shooting conditions.

If s[ELECTRONIC SHUTTER], u[MECHANICAL + ELECTRONIC], or w[E-FRONT + MECHANICAL + ELECTRONIC] is selected, shutter speeds faster than 1/8000 s can be chosen by rotating the shutter speed dial to [8000] and then rotating the rear command dial.

[FLICKER REDUCTION]

Reduce flicker in pictures and the display when shooting under fluorescent lighting and other similar light sources.

Option	Description
[ALL FRAMES]	Flicker reduction is applied to all frames continuous shooting frame rate reduces.
[FIRST FRAME]	Flicker measurement is taken prior to the first frame only and the same reduction amount is applied to all subsequent frames that flicker may occur.
[OFF]	Flicker reduction disabled.

[IS MODE]

Reduce blur.

Option	Description
[CONTINUOUS]	Image stabilization on.
[SHOOTING ONLY]	Image stabilization enabled only when the shutter button is pressed halfway (focus mode [C]) or the shutter is released.
[OFF]	Image stabilization off; x appears in the display. Choose when the camera is mounted on a tripod or otherwise fixed in place.

[ISO AUTO SETTING]

Choose the base sensitivity, maximum sensitivity, and minimum shutter speed for the [A] position on the sensitivity dial. Settings for [AUTO1], [AUTO2], and [AUTO3] can be stored separately; the defaults are shown below.

Options

Item	Options
[DEFAULT SENSITIVITY]	160—12800
[MAX. SENSITIVITY]	400—12800
[MIN. SHUTTER SPEED]	1/500—1/4SEC, [AUTO]

Default

Item	[AUTO1]	[AUTO2]	[AUTO3]
[DEFAULT SENSITIVITY]	160
[MAX. SENSITIVITY]	800	1600	3200
[MIN. SHUTTER SPEED]	[AUTO]

The camera automatically chooses a sensitivity between the default and maximum values; sensitivity is only raised above the default value if the shutter speed required for optimal exposure would be slower than the value selected for [MIN. SHUTTER SPEED].

[MULTI EXPOSURE]

Choose how the camera combines shots to create a “multiple exposure”.

Option	Description
[ON]	Adjust multiple exposure settings and record multiple exposures. [ADDITIVE]: The camera adds the exposures together. You may need to lower exposure compensation depending on the number of shots. [AVERAGE]: The camera automatically optimizes exposure for the final picture. The background in series shot without changing the composition will be optimally exposed. [BRIGHT]: The camera compares the exposures and chooses only the brightest pixel at each location. Colors may be mixed depending on their brightness and hue. [DARK]: The camera compares the exposures and chooses only the darkest pixel at each location. Colors may be mixed depending on their brightness and hue.
[OFF]	Multiple exposure mode disabled.

xF[WIRELESS COMMUNICATION]

Connect to smartphones running the latest version of the FUJIFILM Camera Remote app. The smartphone can then be used to:

• Control the camera and take pictures remotely
• Receive pictures uploaded from the camera
• Browse the pictures on the camera and download selected pictures
• Upload location data to the camera