Accessories from Fujifilm

The following optional accessories are available from Fujifilm. For the latest information on the accessories available in your region, check with your local Fujifilm representative or visit “Accessories”.

Rechargeable Li-ion batteries: NP‑W126S: Additional high-capacity NP‑W126S rechargeable batteries can be purchased as required.

Battery chargers: BC‑W126S: Replacement battery chargers can be purchased as required. At +20 °C/+68 °F, the BC-W126S charges an NP‑W126S in about 150 minutes.

DC couplers: CP‑W126: For extended shooting or playback or when using the camera with a computer, use the CP-W126 to connect the camera to the AC-9V power adapter.

AC power adapters: AC‑9V (requires CP‑W126 DC coupler): Use this 100–240 V, 50/60 Hz AC power adapter for extended shooting and playback or when copying pictures to a computer.

Remote releases: RR‑100: Use to reduce camera shake or keep the shutter open during a time exposure (⌀2.5 mm).

Stereo microphones: MIC‑ST1: An external microphone for movie recording.

Shoe-mounted flash units: EF‑X500: This clip-on flash unit has a Guide Number of 50/164 (ISO 100, m/ft.). Powered by four AA batteries or an optional EF-BP1 battery pack, it supports manual and TTL flash control and auto power zoom in the range 24–105 mm (35 mm format equivalent). The flash head can be rotated 90° up, 10° down, 135° left, or 180° right for bounce lighting.; EF-BP1: A battery pack for shoe-mounted flash units. Takes up to 8 AA batteries.; EF‑X20: This clip-on flash unit has a Guide Number of 20/65 (ISO 100, m/ft.) and supports manual and TTL flash control.

Leather cases: LC-X100V: This leather case comes with a shoulder strap made of the same material. Pictures can be taken and batteries and memory cards inserted or removed with the camera still in its case.

Grip belts: GB‑001: Improves grip. Combine with a hand grip for more secure handling.

Conversion lenses: TCL-X100 II: Increases the focal length of the camera lens.; WCL-X100 II: Reduces the focal length of the camera lens and increases its angle of view.

Adapter rings: AR-X100: An aluminum adapter ring used when attaching the LH-X100 lens hood or ⌀49 mm filters available from third-party suppliers.

Lens hoods: LH-X100: This aluminum lens hood comes with an AR-X100 adapter ring made of the same material. The adapter ring is required when attaching the hood.

Protective filters: PRF-49/PRF-49S: A filter used to protect the lenses of X100-series cameras (requires the AR-X100 adapter ring).

instax SHARE printers: SP‑1/SP‑2/SP-3: Connect via wireless LAN to print pictures on instax film.