Enter a search term and click .

The Shooting Menus (FLASH SETTING)

Adjust flash-related settings.

To display flash-related settings, press MENU/OK in the shooting display and select the F(FLASH SETTING) tab.

The options available vary with the shooting mode selected.

FLASH FUNCTION SETTING

Choose a flash control mode, flash mode, or sync mode or adjust the flash level. The options available vary with the flash.

For more information on flash settings, see “External Flash Units” in “Peripherals and Optional Accessories”.

RED EYE REMOVAL

Remove red-eye effects caused by the flash.

Option Description
FLASH+REMOVAL A red-eye reduction pre-flash is combined with digital red-eye removal.
FLASH Flash red-eye reduction only.
REMOVAL Digital red-eye removal only.
OFF Flash red-eye reduction and digital red-eye removal off.

Flash red-eye reduction can be used in TTL flash control mode.

Digital red-eye removal is performed only when a face is detected.

Digital red-eye removal is not available with RAW images.

TTL-LOCK MODE

Instead of adjusting flash level with each shot, TTL flash control can be locked for consistent results across a series of photographs.

Option Description
LOCK WITH LAST FLASH Flash output is locked at the value metered for the most recent photo.
LOCK WITH METERING FLASH The camera emits a series of pre-flashes and locks flash output at the metered value.

To use TTL lock, assign TTL-LOCK to a camera control and then use the control to enable or disable TTL lock (aAssigning Roles to the Function Buttons).

Flash compensation can be adjusted while TTL lock is in effect.

Selecting LOCK WITH LAST FLASH displays an error message if no previously metered value exists.

LED LIGHT SETTING

Choose whether to use the flash unit’s LED video light (if available) as a catchlight or AF-assist illuminator when taking photos.

Option Role of LED video light in still photography
CATCHLIGHT Catchlight
AF ASSIST AF-assist illuminator
AF ASSIST+CATCHLIGHT AF-assist illuminator and catchlight
OFF None

In some cases, this option can also be accessed via the FLASH FUNCTION SETTING menu.

COMMANDER SETTING

Choose groups when using the camera flash unit as a commander for Fujifilm optical wireless remote flash control. This option is available when the camera is used with clip-on flash units that support Fujifilm optical wireless flash control.

Options
Gr A Gr B Gr C OFF

In some cases, this option can also be accessed via the FLASH FUNCTION SETTING menu.

CH SETTING

Choose the channel used for communication between the commander and remote flash units. Separate channels can be used for different flash systems or to prevent interference when multiple systems are operating in close proximity.

Options
CH1 CH2 CH3 CH4

Built-In Flash

Enable or disable the built-in flash.

Option Description
ON Enable the built-in flash.
OFF Disable the built-in flash. Choose this option when using optional flash units mounted on the camera hot shoe or connected via sync cable.