• The Shooting Menus
• The Shooting Menus (SHOOTING SETTING)

Enter a search term and click .

Adjust shooting options.

---

SELF-TIMER

Choose a shutter release delay.

Option	Description
R2 SEC	The shutter is released two seconds after the shutter button is pressed. Use to reduce blur caused by the camera moving when the shutter button is pressed. The self-timer lamp blinks as the timer counts down.
S10 SEC	The shutter is released ten seconds after the shutter button is pressed. Use for photographs in which you wish to appear yourself. The self-timer lamp blinks immediately before the picture is taken.
OFF	Self-timer off.

SAVE SELF-TIMER SETTING

If ON is selected, the chosen self-timer setting will remain in effect after a picture is taken or the camera is turned off.

Options
ON	OFF

INTERVAL TIMER SHOOTING

Configure the camera to take photos automatically at a preset interval.

1. Highlight INTERVAL TIMER SHOOTING in the A (SHOOTING SETTING) tab and press MENU/OK.

   

2. Use the focus stick (focus lever) to choose the interval and number of shots. Press MENU/OK to proceed.

   

3. Use the focus stick to choose the starting time and then press MENU/OK. Shooting will start automatically.

   

INTERVAL TIMER SHOOTING EXPOSURE SMOOTHING

Select ON to automatically adjust exposure during interval-timer photography to prevent it changing dramatically between shots.

Options
ON	OFF

AE BKT SETTING

Adjust exposure bracketing settings.

Option	Description
FRAMES/ STEP SETTING	Choose the number of shots in the bracketing sequence and the amount exposure is varied with each shot. FRAMES: Choose the number of shots in the bracketing sequence. STEP: Choose the amount exposure is varied with each shot.
1 FRAME/ CONTINUOUS	1 FRAME: The shots in the bracketing sequence are taken one at a time. CONTINUOUS: The shots in the bracketing sequence are taken in a single burst.
SEQUENCE SETTING	Choose the order in which the shots are taken.

FILM SIMULATION BKT

Choose the three film simulation types used for film simulation bracketing (aFILM SIMULATION).

Options
c PROVIA/STANDARD	d Velvia/VIVID	e ASTIA/SOFT
i CLASSIC CHROME	g PRO Neg. Hi	h PRO Neg. Std
g CLASSIC Neg.	X ETERNA/CINEMA	N ETERNA BLEACH BYPASS
a ACROS *	b MONOCHROME *	f SEPIA

* Available with yellow (Ye), red (R), and green (G) filters.

FOCUS BKT

Choose from AUTO and MANUAL focus bracketing modes.

• MANUAL: In MANUAL mode, you choose the following.

  Option	Description
  FRAMES	Choose the number of shots.
  STEP	Choose the amount focus changes with each shot.
  INTERVAL	Choose the interval between shots.

  Focus and FRAMES/STEP

  The relation between focus and the options chosen for FRAMES and STEP is shown in the illustration.

  

  Step

  

  Frames

  Starting focus position

  Focus proceeds from the starting position toward infinity.

  Small STEP values translate to small changes in focus, larger values to larger changes.

  Regardless of the option chosen for FRAMES, shooting ends when focus reaches infinity.

• AUTO: In AUTO mode, the camera calculates FRAMES and STEP automatically.

  1. Select ASHOOTING SETTING in the shooting menu, highlight FOCUS BKT, and press MENU/OK.

  2. Select AUTO and choose an INTERVAL.

     The view through the lens will be displayed.

  3. Focus on the nearest end of the subject and press MENU/OK.

     The selected focus distance appears as A on the focus distance indicator.

     

     The same focus range can be chosen by focusing on the farthest end of the subject first.

  4. Focus on the farthest end of the subject and press DISP/BACK.

     The selected focus distance (B) and focus range (A to B) appear on the focus distance indicator.

     

     Instead of pressing the DISP/BACK button, you can press MENU/OK and select A again.

  5. Take photographs.

     The camera will calculate values for FRAMES and STEP automatically. The number of frames will appear in the display.

     

PHOTOMETRY

Choose how the camera meters exposure.

Mode	Description
o (multi)	The camera instantly determines exposure based on an analysis of composition, color, and brightness distribution. Recommended in most situations.
p (center-weighted)	The camera meters the entire frame but assigns the greatest weight to the area at the center.
v (spot)	The camera meters lighting conditions in an area at the center of the frame equivalent to 2% of the total. Recommended with backlit subjects and in other cases in which the background is much brighter or darker than the main subject.
w (average)	Exposure is set to the average for the entire frame. Provides consistent exposure across multiple shots with the same lighting, and is particularly effective for landscapes and portraits of subjects dressed in black or white.

SHUTTER TYPE

Choose the shutter type. Choose the electronic shutter to mute the shutter sound.

Option	Description
tMECHANICAL SHUTTER	Take pictures with the mechanical shutter.
sELECTRONIC SHUTTER	Take pictures with the electronic shutter.
tE-FRONT CURTAIN SHUTTER	The camera chooses the mechanical or electronic front curtain shutter according to shooting conditions.
uMECHANICAL + ELECTRONIC	The camera chooses the mechanical or electronic shutter according to shooting conditions.
rE-FRONT + ELECTRONIC	The camera chooses the mechanical, electronic, or electronic front curtain shutter according to shooting conditions.

If t E-FRONT CURTAIN SHUTTER is selected, t MECHANICAL SHUTTER will automatically take effect at high shutter speeds.

FLICKER REDUCTION

Select ON to reduce flicker in pictures and the display when shooting under fluorescent lighting and other similar light sources.

Options
ON	OFF

ISO

Adjust the camera’s sensitivity to light.

Option	Description
AUTO1 AUTO2 AUTO3	Sensitivity is automatically adjusted in response to shooting conditions.
12800–100	Adjust sensitivity manually. Selected value is shown in display.
H (102400) H (51200) H (25600) L (50)	Choose for special situations. Note that mottling may appear in pictures taken at H, while L reduces dynamic range.

IS MODE

Reduce blur.

Option	Description
CONTINUOUS	Image stabilization on.
SHOOTING ONLY	Image stabilization enabled only when the shutter button is pressed halfway (focus mode C) or the shutter is released.
OFF	Image stabilization off; x appears in the display. Choose when the camera is mounted on a tripod or otherwise fixed in place.

MOUNT ADAPTOR SETTING

Adjust settings for lenses attached via a mount adapter.

Shutter Select

When using lenses with an internal shutter, choose whether to use the shutter on the camera (BODY) or the lens (LENS).

Saved Settings

Store settings for up to 6 lenses, or choose OFF to disable corrections for focal length, distortion, color shading, and peripheral illumination.

Choosing a Focal Length

Distortion Correction

Color Shading Correction

1. Rotate the rear command dial to choose a corner. The selected corner is indicated by a triangle.

2. Use the focus stick (focus lever) to adjust shading until there is no visible difference in color between the selected corner and the center of the image.

   • Press the focus stick left or right to adjust colors on the cyan–red axis.
   • Press the focus stick up or down to adjust colors on the blue–yellow axis.

Peripheral Illumination Correction

35mm FORMAT MODE

Option	Description
ON	The picture angle is set to 35 mm; the change is reflected in the display.
OFF	35 mm format mode disabled.
AUTO	35 mm format mode is enabled automatically when a mount adapter that supports automatic detection is attached.

WIRELESS COMMUNICATION

Connect to smartphones running the latest version of the FUJIFILM Camera Remote app. The smartphone can then be used to:

Control the camera and take pictures remotely

Receive pictures uploaded from the camera

Browse the pictures on the camera and download selected pictures

Upload location data to the camera