Table of Contents »

• The Setup Menu
• [CONNECTION SETTING]

Enter a search term and click .

Adjust settings for connection to wireless devices, including smartphones, computers, and FUJIFILM instax SHARE printers.

• [WIRELESS SETTINGS]
• [PC AUTO SAVE SETTING]
• [GEOTAGGING SET-UP]
• [instax PRINTER CONNECTION SETTING]
• [PC CONNECTION MODE]

[WIRELESS SETTINGS]

Adjust settings for connection to wireless networks.

[GENERAL SETTINGS]

Choose a name ([NAME]) to identify the camera on the wireless network (the camera is assigned a unique name by default) or select [RESET WIRELESS SETTINGS] to restore default settings.

[RESIZE IMAGE FOR SMARTPHONE]

Choose [ON] (the default setting, recommended in most circumstances) to resize larger images to for upload to smartphones, [OFF] to upload images at their original size. Resizing applies only to the copy uploaded to the smartphone; the original is not affected.

[PC AUTO SAVE SETTINGS]

Choose [DELETE REGISTERED DESTINATION PC] to remove selected destinations, [DETAILS OF PREVIOUS CONNECTION] to view computers to which the camera has recently connected.

[ACCESS POINT SETTINGS]

[SIMPLE SETUP]

Connect to an access point using simple settings.

[MANUAL SETUP]

Manually adjust settings for connection to a wireless network. Choose the network from a list ([SELECT FROM NETWORK LIST]) or enter the name manually ([ENTER SSID]).

[IP ADDRESS]

[AUTO]

The IP address is assigned automatically.

[MANUAL]

Assign an IP address manually. Manually choose the IP address ([IP ADDRESS]), network mask ([NETMASK]), and gateway address ([GATEWAY ADDRESS]).

[PC AUTO SAVE SETTING]

Choose an upload destination. Choose [SIMPLE SETUP] to connect using WPS, [MANUAL SETUP] to configure network settings manually.

[GEOTAGGING SET-UP]

View location data downloaded from a smartphone and choose whether to save the data with your pictures.

[GEOTAGGING]

Choose whether location data downloaded from a smartphone are embedded in pictures as they are taken.

[LOCATION INFO]

Display the location data last downloaded from a smartphone.

[instax PRINTER CONNECTION SETTING]

Adjust settings for connection to optional FUJIFILM instax SHARE printers.

[PC CONNECTION MODE]

Adjust settings for connection to a computer.

[USB CARD READER]

Connecting the camera to a computer via USB automatically enables data transfer mode, allowing data to be copied to the computer. The camera functions normally when not connected.

[USB TETHER SHOOTING AUTO]

Connecting the camera to a computer via USB automatically enables tethered shooting mode. You can also use [FUJIFILM X Acquire] to save and load camera settings, allowing you to reconfi gure the camera in an instant or share settings with other cameras of the same type. The camera functions normally when not connected.

[USB TETHER SHOOTING FIXED]

The camera functions in tethered shooting mode even when not connected to a computer. At default settings, pictures are not saved to the memory card, but pictures taken while the camera is not connected will be transferred to the computer when it is connected.

[WIRELESS TETHER SHOOTING FIXED]

Choose this option for wireless remote photography. Select a network using [CONNECTION SETTING] > [WIRELESS SETTING].

[USB RAW CONV./BACKUP RESTORE]

Connecting the camera to a computer via USB automatically enables USB RAW conversion/backup restore mode. The camera functions normally when not connected.

• [USB RAW CONV.] (requires [FUJIFILM X RAW STUDIO]): Use the camera’s image processing engine to rapidly convert RAW files to high-quality JPEG images.
• [BACKUP RESTORE] (requires [FUJIFILM X Acquire]): Save and load camera settings. Reconfigure the camera in an instant or share settings with other cameras of the same type.