Select [OFF] to disable shutter-speed fine-tuning using the command dials.
[ISO DIAL SETTING (H)]
Choose the ISO sensitivity assigned to the [H] position on the ISO dial.
[ISO DIAL SETTING (L)]
Choose the ISO sensitivity assigned to the [L] position on the ISO dial.
[SHOOT WITHOUT LENS]
Choose whether shutter release is enabled when no lens is attached.
[SHOOT WITHOUT CARD]
Choose whether the shutter can be released without a memory card inserted in the camera.
[ON]
When no memory card is inserted, the shutter can be released to test camera function and the shooting and setup menus can be displayed.
[OFF]
The shutter is disabled if no memory card is inserted, preventing accidental loss of pictures taken without a memory card.
[FOCUS RING]
Choose the direction in which the focus ring is rotated to increase the focus distance.
[AE-L/AF-L BUTTON SETTING]
Switch the roles of the [AF-L] and [AE-L] buttons.
[AE/AF-LOCK MODE]
If [AE & AF ON WHEN PRESSING] is selected, exposure and/or focus will lock while the [AE-L] or [AF-L] button is pressed. If [AE & AF ON/OFF SWITCH] is selected, exposure and/or focus will lock when the [AE-L] or [AF-L] button is pressed and remain locked until the button is pressed again.
[AF-LOCK MODE]
Choose the role played by the [AF-L] button.
[AF LOCK ONLY]
The [AF-L] button locks focus only.
[AE/AF LOCK]
The [AF-L] button locks both exposure and focus.
[APERTURE SETTING]
Choose the method used to adjust aperture when using lenses with no aperture rings.
[AUTO + MANUAL]
Rotate the rear command dial to choose the aperture. Rotate past minimum aperture to choose [A] (auto).
[AUTO]
Aperture is selected automatically; camera functions in exposure mode [P] (program AE) or [S] (shutter-priority AE).
[MANUAL]
Rotate the rear command dial to choose the aperture; camera functions in exposure mode [A] (aperture-priority AE) or [M] (manual).
TO UNLOCK]
S.S OPERATION]
.
