Capture motion in a series of pictures. Press the [DRIVE] button to display drive options, then press the selector up or down to highlight 
([CONTINUOUS]) and press [MENU/OK]. Press the selector left or right to choose a frame advance rate and press [MENU/OK] to select and return to the shooting display.
The camera will take pictures while the shutter button is pressed; shooting ends when the shutter button is released, the maximum number of pictures has been taken, or the memory card is full.
The camera's internal temperature increases with the number of shots taken, and the camera may turn off automatically to protect its internal circuits. Wait for the camera to cool before turning it on again.
If file numbering reaches 999 before shooting is complete, the remaining pictures will be recorded to a new folder.
Burst shooting may not begin if the space available on the memory card is insufficient.
Frame rate varies with the subject, shutter speed, sensitivity, and focus mode and may slow as more shots are taken.
The flash turns off automatically; the previously-selected flash mode is restored when burst shooting is disabled.
Additional time may be required to record pictures when shooting ends.
Focus and Exposure
To vary focus and exposure with each shot, select focus mode [C]; in other modes, focus and exposure are determined by the first shot in each series.
Selecting 
in focus mode [C] restricts the choice of focus frames.
Exposure and focus tracking performance may vary with aperture, sensitivity, and shooting conditions.
.
