A language-selection dialog is displayed the first time the camera is turned on. Set up the camera as described below (you can reset the clock or change languages at any time using the [DATE/TIME] or 
options in the setup menu).
Using the Selector
Press the selector up, down, left, or right to highlight items and press [MENU/OK] to select.
Move cursor up
Move cursor right
Move cursor down
Move cursor left
Select highlighted item
Turn the camera on.
Highlight a language and press [MENU/OK].
Press [DISP/BACK] to skip the current step. Any steps you skip will be displayed the next time the camera is turned on.
The date and time will be displayed. Press the selector left or right to highlight the year, month, day, hour, or minute and press up or down to change. To change the order in which the year, month, and day are displayed, highlight the date format and press the selector up or down. Press [MENU/OK] to set the clock and display performance options.
Press the selector up or down to highlight one of the following options:
[ON]: Select for improved focus and startup performance.
[OFF]: Save battery power.
Press [MENU/OK] to select the highlighted option and exit to shooting mode.
If the battery is removed for an extended period, the camera clock will be reset and the language-selection dialog will be displayed when the camera is turned on.
Display the desired option.
Display the setup menu and select to change the language, [DATE/TIME] to reset the clock, or [POWER MANAGEMENT] > [HIGH PERFORMANCE] to change performance settings.
Adjust settings.
To choose a language or performance setting, highlight the desired option and press [MENU/OK]. To set the clock, press the selector left or right to highlight the year, month, day, hour, or minute and press up or down to change, then press [MENU/OK] once the clock has been set to your satisfaction.
.
