Enter a search term and click .

Continuous Shooting (Burst Mode)

Capture motion in a series of pictures.

  1. Press the I (drive) button to display drive mode options.

  2. Press the focus stick (focus lever) up or down to select I[CONTINUOUS].

  3. Press the focus stick left or right to choose the frame rate (J[HIGH] or O[LOW]).

  4. Press [MENU]/[OK] to save changes and exit the drive-mode menu.

  5. Take pictures.

    Keep the shutter button pressed to take pictures at the rate selected in Step 3.

    Shooting ends when the shutter button is released or the memory card is full.

If file numbering reaches 999 before shooting is complete, the remaining pictures will be recorded to a new folder.

Shooting ends when the memory card is full; the camera will record all photos shot to that point. Burst shooting may not begin if the space available on the memory card is insufficient.

Frame rates may slow as more shots are taken.

Frame rate varies with the scene, shutter speed, sensitivity, and focus mode.

Depending on shooting conditions, frame rates may slow.

The flash cannot be used.

Recording times may increase during burst shooting.