.FThe Shooting Menus ([FLASH SETTING])
Adjust flash-related settings.
To display flash-related settings, press [MENU]/[OK] in the shooting display and select the F ([FLASH SETTING]) tab.
The options available vary with the shooting mode selected.
[FLASH MODE]
Choose a flash mode (aUsing the Flash).
[FLASH COMPENSATION]
Adjust flash brightness. Choose from values between +2 EV and –2 EV.
| Options | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| [-2] | [-1 2/3] | [-1 1/3] | [-1] | [-2/3] | [-1/3] | [±0] | [+1/3] | [+2/3] | [+1 | [+1 1/3] | [+1 2/3] | [+2] |
Note that the desired results may not be achieved depending on shooting conditions and the distance to the subject.
[RED EYE REMOVAL]
Choose [ON] to remove red-eye effects caused by the flash.
| Options | |
|---|---|
| [ON] | [OFF] |
Red-eye reduction is performed only when a face is detected.
Red-eye removal is not available with RAW images.
