Enter a search term and click .

DThe Setup Menus ([SCREEN SETTING])

Make changes to display settings.

To access display settings, press [MENU]/[OK], select the D ([SET UP]) tab, and choose [SCREEN SET-UP].

[LCD BRIGHTNESS]

Adjust monitor brightness.

Options
[−5] [−4] [−3] [−2] [−1] [0] [+1] [+2] [+3] [+4] [+5]

Holding the [DISP]/[BACK] button during shooting sets [LCD BRIGHTNESS] to [+5] and displays [LCD BRIGHTNESS] options.

[LCD COLOR]

Adjust monitor hue.

Options
[−5] [−4] [−3] [−2] [−1] [0] [+1] [+2] [+3] [+4] [+5]

[IMAGE DISP.]

Choose how long images are displayed after shooting.

Option Description
[CONTINUOUS] Pictures are displayed until the [MENU]/[OK] button is pressed or the shutter button is pressed halfway. To zoom in on the active focus point, press the center of the focus stick (focus lever); press again to cancel zoom.
[1.5 SEC] Pictures are displayed for the selected time or until the shutter button is pressed halfway.
[0.5 SEC]
[OFF] Pictures are not displayed after shooting.

Colors may differ slightly from those in the final image.

“Noise” mottling may be visible at high sensitivities.

[PREVIEW EXP./WB IN MANUAL MODE]

Choose whether to enable exposure and/or white balance preview in manual exposure mode.

Option Description
[PREVIEW EXP./WB] Enable exposure and white balance preview.
[PREVIEW WB] Preview white balance only. Choose this option in situations in which exposure and white balance are likely to change during shooting, as may be the case when you use a flash with an incandescent monitoring lamp.
[OFF] Disable exposure and white balance preview. Choose this option when using a flash or on other occasions on which exposure may change when the picture is taken.

[NATURAL LIVE VIEW]

Choose whether the effects of film simulation, white balance, and other settings are visible in the monitor.

Option Description
[ON] The effects of camera settings are not visible in the monitor, but shadows in low-contrast, back-lit scenes and other hard-to-see subjects more visible. Colors and tone will differ from those in the final picture. The display will however be adjusted to show the effects of advanced filters and of monochrome and sepia settings.
[OFF] The effects of film simulation, white balance, and other settings can be previewed in the monitor.

[FRAMING GUIDELINE]

Choose a framing grid for shooting mode.

  Option
F[GRID 9] G[GRID 24]
Display
For “rule of thirds” composition. A six-by-four grid.

Framing guides are not shown at default settings but can be displayed using D[SCREEN SET-UP] > [DISP. CUSTOM SETTING] (a[DISP. CUSTOM SETTING]).

[AUTOROTATE PB]

Choose [ON] to automatically rotate “tall” (portrait-orientation) pictures during playback.

Options
[ON] [OFF]

[FOCUS SCALE UNITS]

Choose the units used for the focus distance indicator.

Options
[METERS] [FEET]

[DISP. CUSTOM SETTING]

Choose the items shown in the standard indicator display.

  1. In shooting mode, use the [DISP]/[BACK] button to display standard indicators.

  2. Press [MENU]/[OK] and select D[SCREEN SET-UP] > [DISP. CUSTOM SETTING] in the D ([SET UP]) tab.

  3. Highlight items and press [MENU]/[OK] to select or deselect.

    Item Default
    [FRAMING GUIDELINE] R
    [ELECTRONIC LEVEL] R
    [FOCUS FRAME] R
    [AF DISTANCE INDICATOR] R
    [MF DISTANCE INDICATOR] R
    [HISTOGRAM] R
    [SHOOTING MODE] R
    [APERTURE/S-SPEED/ISO] R
    [INFORMATION BACKGROUND] R
    [Expo. Comp. (Digit)] R
    [Expo. Comp. (Scale)] R
    [FOCUS MODE] R
    [PHOTOMETRY] R
    [SHUTTER TYPE] R
    [FLASH] R
    [CONTINUOUS MODE] R
    [DUAL IS MODE] R
    [WHITE BALANCE] R
    [FILM SIMULATION] R
    [DYNAMIC RANGE] R
    [FRAMES REMAINING] R
    [IMAGE SIZE/QUALITY] R
    [MOVIE MODE & REC. TIME] R
    [AUTO IMAGE TRANSFER] R
    [BATTERY LEVEL] R

  4. Press [DISP]/[BACK] to save changes.

  5. Press [DISP]/[BACK] as needed to exit the menus and return to the shooting display.