.The Setup Menus (D[POWER MANAGEMENT])
Adjust power management settings.
To access power management settings, press [MENU/OK], select the D ([SET UP]) tab, and choose [POWER MANAGEMENT].
[AUTO POWER OFF]
Choose the length of time before the camera turns off automatically when no operations are performed. Shorter times increase battery life; if [OFF] is selected, the camera must be turned off manually.
| Options | |||||
|---|---|---|---|---|---|
| [5 MIN] | [2 MIN] | [1 MIN] | [30 SEC] | [15 SEC] | [OFF] |
[SHOOTING STAND BY MODE]
In standby mode, all displays except the secondary LCD monitor turn off to save power. Choose how long the camera waits before entering standby mode when no operations are performed, or select [OFF] to disable standby mode.
| Options | |||||
|---|---|---|---|---|---|
| [5 MIN] | [2 MIN] | [1 MIN] | [30 SEC] | [15 SEC] | [OFF] |
[AUTO POWER SAVE]
If [ON] is selected, the display frame rate will drop to save power if no operations are performed for a short period, but the normal frame rate can be restored by operating camera controls.
| Options | |
|---|---|
| [ON] | [OFF] |
