The Setup Menus (D[BUTTON/DIAL SETTING])
Access options for camera controls.
To access control options, press [MENU/OK], select the D ([SET UP]) tab, and choose [BUTTON/DIAL SETTING].
[FOCUS LEVER SETTING]
Choose the functions performed by the focus stick (focus lever).
Option | Description |
---|---|
[LOCK (OFF)] | The focus stick can not be used during shooting. |
[PUSH n TO UNLOCK] | Press the stick to view the focus-point display and tilt the stick to select a focus point. |
[ON] | Tilt the stick to view the focus-point display and select a focus point. |
[EDIT/SAVE QUICK MENU]
Choose the items displayed in the quick menu.
-
Select D[BUTTON/DIAL SETTING] > [EDIT/SAVE QUICK MENU] in the D ([SET UP]) tab.
-
The current quick menu will be displayed; use the selector to highlight the item you wish to change and press [MENU/OK].
-
Highlight any of the following options and press [MENU/OK] to assign it to the selected position.
[IMAGE SIZE]
[IMAGE QUALITY]
[FILM SIMULATION] *
[GRAIN EFFECT] *
[COLOR CHROME EFFECT] *
[SMOOTH SKIN EFFECT] *
[DYNAMIC RANGE] *
[WHITE BALANCE] *
[HIGHLIGHT TONE] *
[SHADOW TONE] *
[COLOR] *
[SHARPNESS] *
[NOISE REDUCTION] *
[SELECT CUSTOM SETTING] *
[AF MODE]
[FACE/EYE DETECTION SETTING]
[MF ASSIST]
[TOUCH SCREEN MODE]
[SELF-TIMER]
[PHOTOMETRY]
[SHUTTER TYPE]
[FLICKER REDUCTION]
[FLASH FUNCTION SETTING]
[FLASH COMPENSATION]
[MOVIE MODE]
[MIC LEVEL ADJUSTMENT]
[EVF/LCD BRIGHTNESS]
[EVF/LCD COLOR]
[NONE]
* Stored in custom settings bank.
Select [NONE] to assign no option to the selected position. When [SELECT CUSTOM SETTING] is selected, current settings are shown in the quick menu by the label [BASE].
-
Highlight the desired item and press [MENU/OK] to assign it to the selected position.
The quick menu can also be accessed in shooting mode by holding the [Q] button.
[FUNCTION (Fn) SETTING]
Choose the roles played by the function buttons.
-
Select D[BUTTON/DIAL SETTING] > [FUNCTION (Fn) SETTING] in the D ([SET UP]) tab.
-
Highlight the desired control and press [MENU/OK].
-
Highlight any of the following options and press [MENU/OK] to assign it to the selected control.
[EXP. COMPENSATION]
[IMAGE SIZE]
[IMAGE QUALITY]
[RAW]
[FILM SIMULATION]
[GRAIN EFFECT]
[COLOR CHROME EFFECT]
[SMOOTH SKIN EFFECT]
[DYNAMIC RANGE]
[WHITE BALANCE]
[SELECT CUSTOM SETTING]
[FOCUS AREA]
[FOCUS CHECK]
[AF MODE]
[RAPID AF]
[FACE/EYE DETECTION SETTING]
[SELF-TIMER]
[AE BKT SETTING]
[FOCUS BKT SETTING]
[PHOTOMETRY]
[SHUTTER TYPE]
[FLICKER REDUCTION]
[ISO AUTO SETTING]
[35mm FORMAT MODE]
[WIRELESS COMMUNICATION]
[FLASH FUNCTION SETTING]
[TTL-LOCK]
[MODELING FLASH]
[MIC LEVEL ADJUSTMENT]
[PREVIEW DEPTH OF FIELD]
[PREVIEW EXP./WB IN MANUAL MODE]
[PREVIEW PIC. EFFECT]
[HISTOGRAM]
[ELECTRONIC LEVEL]
[LARGE INDICATORS MODE]
[AE LOCK ONLY]
[AF LOCK ONLY]
[AE/AF LOCK]
[AF-ON]
[APERTURE SETTING]
[LOCK SETTING]
[PLAYBACK]
[NONE] (control disabled)
Function button assignment options can also be accessed by holding the [DISP/BACK] button. The selector can not be assigned more than one role at a time.
[AF-ON]
If [AF-ON] is selected, you can press the control instead of keeping the shutter button pressed halfway.
[MODELING FLASH]
If [MODELING FLASH] is selected when a compatible shoe-mounted flash unit is attached, you can press the control to test-fire the flash and check for shadows and the like (modeling flash).
[TTL-LOCK]
If [TTL-LOCK] is selected, you can press the control to lock flash output according to the option selected for F[FLASH SETTING] > [TTL-LOCK MODE] (a[TTL-LOCK MODE]).
[SELECTOR BUTTON SETTING]
Choose the roles played by the up, down, left, and right buttons on the selector.
Option | Description |
---|---|
[Fn BUTTON] | The selector buttons serve as function buttons. |
[FOCUS AREA] | The selector buttons can be used to position the focus area. |
Selecting [FOCUS AREA] prevents you accessing the functions assigned to the function buttons.
[COMMAND DIAL SETTING]
Choose the roles played by the command dials.
Option | Description |
---|---|
Y[F] X[S.S.] | The front command dial controls aperture, the rear command dial shutter speed. |
Y[S.S.] X[F] | The front command dial controls shutter speed, the rear command dial aperture. |
o[S.S. OPERATION]
Select [OFF] to disable shutter-speed fine-tuning using the command dials.
Options | |
---|---|
[ON] | [OFF] |
[SHUTTER AF]
Choose whether the camera focuses when the shutter button is pressed halfway.
Option | Description |
---|---|
[ON] | In focus mode [S] ([AF‑S]), the camera focuses when the shutter button is pressed halfway and locks focus while the button remains in this position. In focus mode [C] ([AF‑C]), focus is adjusted continually while the button is pressed halfway. |
[OFF] | The camera does not focus when the shutter button is pressed halfway. |
[SHUTTER AE]
If [ON] is selected, exposure will lock while the shutter button is pressed halfway.
Options | |
---|---|
[ON] | [OFF] |
Select [OFF] to allow the camera to adjust exposure before each shot taken in burst mode.
[SHOOT WITHOUT LENS]
Choose [ON] to enable the shutter release when no lens is attached.
Options | |
---|---|
[ON] | [OFF] |
[SHOOT WITHOUT CARD]
Choose whether the shutter can be released without a memory card inserted in the camera.
Option | Description |
---|---|
[ON] | When no memory card is inserted, the shutter can be released to test camera function and the shooting and setup menus can be displayed. |
[OFF] | The shutter is disabled if no memory card is inserted, preventing accidental loss of pictures taken without a memory card. |
[FOCUS RING]
Choose the direction in which the focus ring is rotated to increase the focus distance.
Options | |
---|---|
X[CW] (clockwise) | Y[CCW] (counterclockwise) |
[AE/AF-LOCK MODE]
If [AE & AF ON WHEN PRESSING] is selected, exposure and/or focus will lock while you press the button to which exposure or focus lock is assigned. If [AE & AF ON/OFF SWITCH] is selected, exposure and/or focus will lock when the button is pressed and remain locked until it is pressed again.
Options | |
---|---|
[AE & AF ON WHEN PRESSING] | [AE & AF ON/OFF SWITCH] |
[EXPO. COMP. BUTTON SETTING]
Control the behavior of the rear command dial and the button to which exposure compensation is assigned. If d[ON WHEN PRESSING] is selected, exposure compensation can be adjusted by holding the button while rotating dial; if d[ON/OFF SWITCH] is selected, exposure compensation can be set by pressing the button once, rotating the dial, and then pressing the button again.
Options | |
---|---|
[ON WHEN PRESSING] | [ON/OFF SWITCH] |
[APERTURE SETTING]
Choose the method used to adjust aperture when using lenses with no aperture rings.
Option | Description |
---|---|
[AUTO] + o [MANUAL] |
Rotate the front command dial to choose the aperture. Rotate past minimum aperture to choose [A] (auto). |
[AUTO] | Aperture is selected automatically; camera functions in exposure mode [P] (program AE) or [S] (shutter-priority AE). |
[MANUAL] | Rotate the front command dial to choose the aperture; camera functions in exposure mode [A] (aperture-priority AE) or [M] (manual). |
[TOUCH SCREEN SETTING]
Enable or disable touch-screen controls.
Options | |
---|---|
[ON] | [OFF] |
[LOCK]
Lock selected controls to prevent unintended operation.
Option | Description |
---|---|
[LOCK SETTING] |
Choose from the following: [UNLOCK]: Reset lock options. [ALL FUNCTION]: Lock all controls in the [FUNCTION SELECTION] list. [SELECTED FUNCTION]: Lock only the controls selected in the [FUNCTION SELECTION] list. |
[UNCTION SELECTION] | Choose the controls locked when [SELECTED FUNCTION] is chosen for [LOCK SETTING]. |
The selector and the [Q] button can be locked at any time by pressing and holding the [MENU/OK] button.