• The Shooting Menus
• The Shooting Menus ([MOVIE SETTING])

Enter a search term and click .

Adjust movie-recording options.

---

[MOVIE MODE]

1. In the shooting menu, select B[MOVIE SETTING], then highlight [MOVIE MODE] and press [MENU]/[OK].

2. Press the selector up or down to highlight the desired frame size and aspect ratio (A) and press the selector right.

   • Choose V[16:9] or d[17:9] for 4K movies with aspect ratios of 16 or 17 to 9.
   • Choose W[16:9] or W[17:9] for Full HD movies with aspect ratios of 16 or 17 to 9.

3. Press the selector up or down to highlight a frame rate (B) and press the selector right.

   Options
   [59.94P]	[50P]	[29.97P]	[25P]	[24P]	[23.98P]

4. Press the selector up or down to highlight a bit rate (C) and press [MENU]/[OK].

   Options
   [400Mbps]	[200Mbps]	[100Mbps]	[50Mbps]

[H.265(HEVC)/H.264]

Choose a codec for movie recording.

Option	Description
[H.265(HEVC)]	Use for higher quality footage with a high compression ratio. Movies can be viewed only on devices that support H.265 (HEVC).
[H.264]	Movies filmed using this widely-supported codec can be viewed on a variety devices.

[MOVIE COMPRESSION]

Choose type of compression used to record movies.

Option	Description
[ALL-Intra]	Each frame is compressed separately. Files are larger, but the fact that the data for each frame are saved separately makes this a good choice for footage that will be further processed. When V is selected for frame size, frame rates of [59.94P] and [50P] automatically switch to [29.97P] and [25P], respectively.
[Long GOP]	Balances good image quality with high compression. Files are smaller, making this a good choice for longer movies.

[FULL HD HIGH SPEED REC]

Record high-frame-rate Full HD movies. High-frame-rate movies can be played back in slow motion, giving you time to view fast-moving subjects or details too fleeting for the naked eye.

Option	Description
[2xa59.94P] F[120P]	Record Full HD footage at frame rates of 120 or 100 fps. The movies play back at 1/2, 1/4, or 1/5 speed. Maximum recording length is 6 minutes. The footage recorded to the memory card is compressed with the goal of keeping the amount of data recorded to 200 Mb per second.
[2xa50P] F[100P]
[4xa29.97P] F[120P]
[4xa25P] F[100P]
[5xa24P] F[120P]
[5xa23.98P] F[120P]
[OFF]	High-speed recording off.

F[FILM SIMULATION]

Choose a film simulation effect for movie recording.

Option	Description
c [PROVIA/ STANDARD]	See “[FILM SIMULATION]”.
d[Velvia/VIVID]
e[ASTIA/ SOFT]
i[CLASSIC CHROME]
g[PRO Neg. Hi]
h[PRO Neg. Std]
X[ETERNA/CINEMA]
a[ACROS]
b[MONOCHROME]
f[SEPIA]

F[B & W ADJ.ab (Warm/Cool)]

Add a reddish or bluish tinge (warm or cool color cast) to monochrome pictures taken with the a[ACROS] or b[MONOCHROME] film simulation.

Option	Description
[+9] — [+1]	Higher positive values equate to a redder color cast.
[0]	Normal monochrome (grayscale).
[-1] — [-9]	Lower negative values equate to a bluer color cast.

F[WHITE BALANCE]

Adjust white balance for movie recording.

Option	Description
[AUTO]	See “[WHITE BALANCE]”.
k/l/m
k
i
j
k
l
m
n
g

F[DYNAMIC RANGE]

Choose a dynamic range for movie recording.

Option	Description
V[100％]	See “[DYNAMIC RANGE]”.
W[200％]
X[400％]

F[HIGHLIGHT TONE]

Choose how the camera records highlights when shooting movies.

F[SHADOW TONE]

Choose how the camera records shadows when shooting movies.

F[COLOR]

Adjust color density for movie recording.

F[SHARPNESS]

Sharpen or soften outlines in movies.

F[NOISE REDUCTION]

Reduce noise in movies shot at high sensitivities.

V[INTERFRAME NR]

Select [ON] to enable interframe noise reduction.

[F-Log/HLG RECORDING]

Choose the destination for F‐Log and HLG (Hybrid Log-Gamma) movies shot while the camera is connected to an HDMI device.

Option	Description
bP YP	The footage is processed using film simulation and both saved to the memory card and output to the HDMI device.
b[F-Log] Y[F-Log]	The footage is recorded to the memory card and output to the HDMI device in F-Log format.
bP Y[F-Log]	The footage is output to the HDMI device in F-Log format but saved to the memory card with film simulation applied.
b[F-Log] YP	The footage is recorded to the memory card in F-Log format but output to the HDMI device with film simulation applied.
b[HLG] Y[HLG]	The footage is recorded to the memory card and output to the HDMI device in HLG format.

F[PERIPHERAL LIGHT CORRECTION]

Select [ON] to enable peripheral illumination correction during movie recording.

F[FOCUS AREA]

Choose the focus area for movies shot using autofocus. You can also choose the focus area (and consequently also the focus zoom position) for movies shot using manual focus.

[MOVIE AF MODE]

Choose how the camera selects the focus point for movie recording.

Option	Description
[MULTI]	Automatic focus-point selection.
[AREA]	The camera focuses on the subject in the selected focus area.

F[AF-C CUSTOM SETTING]

Select focus-tracking options when recording movies in focus mode [C].

[TRACKING SENSITIVITY]

Choose how long the camera waits to switch focus when an object enters the focus area behind or in front of the current subject. See “[TRACKING SENSITIVITY]”.

[AF SPEED]

Adjust the autofocus response speed.

F[FACE/EYE DETECTION SETTING]

Enable or disable Intelligent Face Detection when recording movies. See “[FACE/EYE DETECTION SETTING]”.

Option	Description
[FACE ON/EYE OFF]	Intelligent Face Detection only.
[FACE ON/EYE AUTO]	The camera automatically chooses which eye to focus on when a face is detected.
[FACE ON/RIGHT EYE PRIORITY]	The camera focuses on the right eye of subjects detected using Intelligent Face Detection.
[FACE ON/LEFT EYE PRIORITY]	The camera focuses on the left eye of subjects detected using Intelligent Face Detection.
[FACE OFF/EYE OFF]	Intelligent Face Detection and eye priority off.

F[MF ASSIST]

Choose how focus is displayed in manual focus mode.

Option	Description
[STANDARD]	Focus is displayed normally (focus peaking is not available).
[FOCUS PEAK HIGHLIGHT]	The camera heightens high-contrast outlines. Choose a color and peaking level.

F[FOCUS CHECK]

If [ON] is selected, the display will automatically zoom in on the selected focus area when the focus ring is rotated in manual focus mode.

Options
[ON]	[OFF]

[4K MOVIE OUTPUT]

Choose the destination for 4K movies shot while the camera is connected to an HDMI recorder or other device that supports 4K.

Option	Description
b[4K] Y[4K]	4K movies are recorded to the camera memory card and output to the HDMI device in 4K.
b[4K] Y[FHD]	4K movies are recorded to a camera memory card in 4K and output to the HDMI device in Full HD.
b[FHD] Y[4K]	4K movies are output to the HDMI device in 4K and recorded to the camera memory card in Full HD.
b― Y[4K]	4K movies are output to the HDMI device in 4K. The camera does not record 4K movies to a memory card.

[FULL HD MOVIE OUTPUT]

Choose the destination for Full HD movies shot while the camera is connected to an HDMI device.

Option	Description
b[FHD] Y[FHD]	Full HD movies are output to the HDMI device and recorded to the camera memory card.
b― Y[FHD]	Full HD movies are not recorded to the camera memory card but are output to the HDMI device.

[HDMI OUTPUT INFO DISPLAY]

If [ON] is selected, HDMI devices to which the camera is connected will mirror the information in the camera display.

Options
[ON]	[OFF]

[4K HDMI STANDBY QUALITY]

Choose whether output to connected HDMI devices switches from 4K to Full HD during standby.

Option	Description
V	Output to HDMI devices continues at 4K during standby.
W	Output to HDMI devices switches to Full HD during standby, reducing the drain on the battery.

[HDMI REC CONTROL]

Choose whether the camera sends movie start and stop signals to the HDMI device when the shutter button is pressed to start and stop movie recording.

Options
[ON]	[OFF]

[ZEBRA SETTING]

Highlights that may be overexposed are shown by zebra stripes in the movie mode display.

Option	Description
[ZEBRA RIGHT]	Right-slanting stripes.
[ZEBRA LEFT]	Left-slanting stripes.
[OFF]	Stripes off.

[ZEBRA LEVEL]

Choose the brightness threshold for the zebra stripe display.

[AUDIO SETTING]

Adjust audio-related settings for movie recording.

[INTERNAL MIC LEVEL ADJUSTMENT]

Adjust the recording level for the built-in microphone.

Option	Description
[AUTO]	The camera adjusts the recording level automatically.
[MANUAL]	Adjust the recording level manually. Press the selector right to choose from 25 recording levels.
[OFF]	Turn the built-in microphone off.

[EXTERNAL MIC LEVEL ADJUSTMENT]

Adjust the recording level for external microphones.

Option	Description
[AUTO]	The camera adjusts the recording level automatically.
[MANUAL]	Adjust the recording level manually. Press the selector right to choose from 25 recording levels.
[OFF]	Disable recording using external microphones.

[MIC LEVEL LIMITER]

Reduces distortion caused by input that exceeds the limits of the microphone’s audio circuits.

Options
[ON]	[OFF]

[WIND FILTER]

Choose whether to enable wind noise reduction during movie recording.

Options
[ON]	[OFF]

[LOW CUT FILTER]

Choose whether to enable the low-cut filter, reducing low-frequency noise during movie recording.

Options
[ON]	[OFF]

[HEADPHONES VOLUME]

Adjust the headphone volume.

Option	Description
[10]—[1]	Choose a volume of from 1 to 10.
[0]	Mute output to the headphones.

[TIME CODE SETTING]

Adjust time code (hour, minute, second, and frame number) display settings for movie recording.

[TIME CODE DISPLAY]

Select [ON] to display time codes during movie recording and playback.

Options
[ON]	[OFF]

[START TIME SETTING]

Choose the time code starting time.

Option	Description
[MANUAL INPUT]	Highlight this option and press the selector right to choose a start time manually.
[CURRENT TIME]	Set the start time to the current time.
[RESET]	Set the start time to 00:00:00.

[COUNT UP SETTING]

Choose whether time is clocked continuously or only during movie recording.

Option	Description
[REC RUN]	Time is clocked only during movie recording.
[FREE RUN]	Time is clocked continuously.

[DROP FRAME]

At frame rates of [59.94P], and [29.97P], a discrepancy will gradually develop between the time code (measured in seconds) and the actual recording time (measured in fractions of a second). Choose whether the camera drops frames as necessary to match the recording time to the time code.

Option	Description
[ON]	The camera drops frames as necessary to maintain a strict match between the time code and the actual recording time.
[OFF]	Frames are not dropped.

[HDMI TIME CODE OUTPUT]

Choose whether time codes are output to HDMI devices.

Options
[ON]	[OFF]

[TALLY LIGHT]

Choose the lamp (indicator or AF-assist) that lights during movie recording and whether the lamp blinks or remains steady.

Option	Description
[FRONT OFF] [REAR]z	The indicator lamp lights during movie recording.
[FRONT OFF] [REAR]y	The indicator lamp blinks during movie recording.
[FRONT]z [REAR]z	The indicator and AF-assist lamps light during movie recording.
[FRONT]z [REAR OFF]	The AF-assist lamp lights during movie recording.
[FRONT]y [REAR]y	The indicator and AF-assist lamps blink during movie recording.
[FRONT]y [REAR OFF]	The AF-assist lamp blinks during movie recording.
[FRONT OFF] [REAR OFF]	The indicator and AF-assist lamps remain off during movie recording.

[MOVIE SILENT CONTROL]

Select [ON] to disable camera dials and adjust movie settings using touch-screen controls, preventing the sounds made by camera controls being recorded with the movie (aMuting Movie Controls).

Options
[ON]	[OFF]