Enter a search term and click .

Assign a role to the function buttons for quick access to the selected feature.


The functions assigned to T-Fn1 through T-Fn4 can be accessed by flicking the monitor.

Touch-function gestures are disabled by default. To enable touch-function gestures, select ON for D BUTTON/DIAL SETTING > TOUCH SCREEN SETTING > cTOUCH FUNCTION.

The default assignments are:

Touch-Function Gestures

Function buttons Default

AT-Fn1 (flick up)

HISTOGRAM

BT-Fn2 (flick left)

AF MODE

CT-Fn3 (flick right)

WHITE BALANCE

DT-Fn4 (flick down)

ELECTRONIC LEVEL

Back-of-Camera Function Buttons

Function buttons Default

AAE-L/AF-L button

AE/AF LOCK

BCenter of rear command dial

FOCUS CHECK

CFn1 button

PHOTOMETRY

DFn3 button

FILM SIMULATION

EQ button

QUICK MENU

Front-of-Camera Function Buttons

Function buttons Default

AFn2 button

FRONT COMMAND DIAL SWITCH

Assigning Roles to the Function Buttons

To assign roles to the buttons:

  1. Press and hold the DISP/BACK button until a control selection menu is displayed.

  2. Highlight the desired control and press MENU/OK.

  3. Highlight any of the following options and press MENU/OK to assign it to the selected control.

AE LOCK ONLY, AF LOCK ONLY, AE/AF LOCK, AF-ON, and AWB LOCK ONLY cannot be assigned to the touch function buttons (T-Fn1 through T-Fn4).

Button assignments can also be selected using DBUTTON/DIAL SETTING > FUNCTION (Fn) SETTING.

Roles That Can Be Assigned to the Function Buttons

  • IMAGE SIZE
  • IMAGE QUALITY
  • RAW
  • FILM SIMULATION
  • GRAIN EFFECT
  • COLOR CHROME EFFECT
  • COLOR CHROME FX BLUE
  • DYNAMIC RANGE
  • D RANGE PRIORITY
  • WHITE BALANCE
  • CLARITY
  • SELECT CUSTOM SETTING
  • FOCUS AREA
  • FOCUS CHECK
  • AF MODE
  • AF-C CUSTOM SETTINGS
  • FACE SELECT o
  • FACE DETECTION ON/OFF *
  • AF RANGE LIMITER
  • SPORTS FINDER MODE
  • PRE-SHOT sN
  • SELF-TIMER
  • AE BKT SETTING
  • FOCUS BKT SETTING
  • PHOTOMETRY
  • SHUTTER TYPE
  • FLICKER REDUCTION
  • ISO AUTO SETTING
  • BRIGHT FRAME BRIGHTNESS
  • IS MODE
  • WIRELESS COMMUNICATION
  • FLASH FUNCTION SETTING
  • TTL-LOCK
  • MODELING FLASH
  • FULL HD HIGH SPEED REC
  • ZEBRA SETTING
  • INTERNAL/EXTERNAL MIC LEVEL ADJUSTMENT
  • MOVIE SILENT CONTROL
  • EYE SENSOR SETTING
  • PREVIEW DEPTH OF FIELD
  • PREVIEW EXP./WB IN MANUAL MODE
  • NATURAL LIVE VIEW
  • HISTOGRAM
  • ELECTRONIC LEVEL
  • LARGE INDICATORS MODE
  • FRONT COMMAND DIAL SWITCH
  • AE LOCK ONLY
  • AF LOCK ONLY
  • AE/AF LOCK
  • AF-ON
  • AWB LOCK ONLY
  • LOCK SETTING
  • PERFORMANCE
  • AUTO IMAGE TRANSFER ORDER
  • SELECT PAIRING DESTINATION
  • Bluetooth ON/OFF
  • QUICK MENU
  • PLAYBACK
  • NONE (control disabled)

* Selection via the function buttons is not available when the OVF is displayed.

AF‑ON

If AF‑ON is selected, you can press the control instead of keeping the shutter button pressed halfway.

MODELING FLASH

If MODELING FLASH is selected when a compatible shoe-mounted flash unit is attached, you can press the control to test-fire the flash and check for shadows and the like (modeling flash).

TTL-LOCK

If TTL-LOCK is selected, you can press the control to lock flash output according to the option selected for FFLASH SETTING > TTL-LOCK MODE (aTTL-LOCK MODE).

n FACE SELECT o

n FACE SELECT o can be enabled or disabled by pressing the button to which n FACE SELECT o is assigned.

Enabling n FACE SELECT o allows the focus stick (focus lever) to be used to select the face that will be used for focus. To switch from face-detection to manual focus-area selection (aFocus-Point Selection), press the center of the focus stick (focus lever). Press again to re-enable face detection.