• The Setup Menus
• The Setup Menus ([BUTTON/DIAL SETTING])

Enter a search term and click .

Access options for camera controls.

---

[FOCUS LEVER SETTING]

Choose the functions performed by the focus stick (focus lever).

Option	Description
[LOCK (OFF)]	The focus stick cannot be used during shooting.
[PUSHnTO UNLOCK]	Press the stick to view the focus-point display and tilt the stick to select a focus point.
[ON]	Tilt the stick to view the focus-point display and select a focus point.

[EDIT/SAVE QUICK MENU]

Choose the items displayed in the quick menu.

1. Select D[BUTTON/DIAL SETTING] > [EDIT/SAVE QUICK MENU] in the D([SET UP]) tab.

2. Choose the number of items displayed in the quick menu.

   Quick menu save/edit options will be displayed.

3. Highlight the item you wish to change and press [MENU/OK].

   The following can be assigned to the quick menu.

   • [IMAGE SIZE]
   • [IMAGE QUALITY]
   • [FILM SIMULATION]
   • [GRAIN EFFECT]
   • [COLOR CHROME EFFECT]
   • [COLOR CHROME FX BLUE]
   • [DYNAMIC RANGE]
   • [D RANGE PRIORITY]
   • [WHITE BALANCE]
   • [HIGHLIGHT TONE]
   • [SHADOW TONE]
   • [COLOR]
   • [SHARPNESS]
   • [CLARITY]
   • [NOISE REDUCTION]
   • [SELECT CUSTOM SETTING]
   • [AF MODE] ([MOVIE AF MODE])
   • [AF-C CUSTOM SETTINGS]
   • [FACE/EYE DETECTION SETTING]

   • [MF ASSIST]
   • [TOUCH SCREEN MODE]
   • [SELF-TIMER]
   • [PHOTOMETRY]
   • [SHUTTER TYPE]
   • [FLICKER REDUCTION]
   • [CONVERSION LENS]
   • [ND FILTER]
   • [FLASH FUNCTION SETTING]
   • [FLASH COMPENSATION]
   • [MOVIE MODE]
   • [FULL HD HIGH SPEED REC]
   • [INTERNAL/EXTERNAL MIC LEVEL ADJUSTMENT]
   • [SOUND & FLASH]
   • [EVF/LCD BRIGHTNESS]
   • [EVF/LCD COLOR]
   • [NONE]

   Select [NONE] to assign no option to the selected position.

   When [SELECT CUSTOM SETTING] is selected, current settings are shown in the quick menu by the label [BASE].

4. Highlight the desired option and press [MENU/OK].

   The selected option will be assigned to the quick menu.

[Q MENU BACKGROUND]

Choose [TRANSPARENT] for a transparent background.

Options
[TRANSPARENT]	[BLACK]

[FUNCTION (Fn) SETTING]

Choose the roles played by the function buttons.

1. Select D[BUTTON/DIAL SETTING] > [FUNCTION (Fn) SETTING] in the D([SET UP]) tab.

2. Highlight the desired control and press [MENU/OK].

3. Highlight any of the following options and press [MENU/OK] to assign it to the selected control.

Roles That Can Be Assigned to the Function Buttons

Choose from:

* Selection via the function buttons is not available when the OVF is displayed.

[AF-ON]

If [AF-ON] is selected, you can press the control instead of keeping the shutter button pressed halfway.

[MODELING FLASH]

If [MODELING FLASH] is selected when a compatible shoe-mounted flash unit is attached, you can press the control to test-fire the flash and check for shadows and the like (modeling flash).

[TTL-LOCK]

If [TTL-LOCK] is selected, you can press the control to lock flash output according to the option selected for F [FLASH SETTING] > [TTL-LOCK MODE] (a[TTL-LOCK MODE]).

[FACE SELECT]op

The following features can be accessed using the focus stick or during viewfinder photography when [FACE SELECT] op is enabled:

• The face used to set focus can be selected using the focus stick. To switch from face detection to manual focus-area selection, press the center of the focus stick (focus lever) (aFocus-Point Selection). Press again to re-enable face detection.
• The touch screen (monitor) or focus stick can be used to select the face used to set focus during viewfinder photography.

[SPOT METERING LOCK]

If [SPOT METERING LOCK] is selected, you can press the control to meter your subject using [SPOT] metering regardless of the option currently selected for A[SHOOTING SETTING]  > [PHOTOMETRY]. The option selected for A[SHOOTING SETTING]  > [PHOTOMETRY] can be restored by pressing the control again.

[COMMAND DIAL SETTING]

Choose the roles played by the command dials.

Option	Description
[FRONT COMMAND DIAL 1]	Assign shutter speed ([S.S. (PROGRAM SHIFT)]) or aperture ([APERTURE]) 1 to [FRONT COMMAND DIAL 1].
[FRONT COMMAND DIAL 2]	Assign shutter speed ([S.S. (PROGRAM SHIFT)]), aperture ([APERTURE]) 1, exposure compensation ([EXP. COMPENSATION]) 2, sensitivity ([ISO]) 3, or no role ([NONE]) to [FRONT COMMAND DIAL 2] or [FRONT COMMAND DIAL 3].
[FRONT COMMAND DIAL 3]
[REAR COMMAND DIAL]	Assign shutter speed ([S.S. (PROGRAM SHIFT)]), aperture ([APERTURE]) 1, exposure compensation ([EXP. COMPENSATION])  2, sensitivity ([ISO]) 3, or no role ([NONE]) to the rear command dial.

1 Aperture set to [A] (auto) and [COMMAND] selected for D[BUTTON/DIAL SETTING] > [APERTURE RING SETTING (A)].

2 Exposure compensation dial rotated to [C].

3 [C] selected for sensitivity.

[SHUTTER AF]

Choose whether the camera focuses when the shutter button is pressed halfway.

Option	Description
[AF-S]	[ON]: Focus locks when the shutter button is pressed halfway. [OFF]: No focus operation is performed when the shutter button is pressed halfway.
[AF-C]	[ON]: The camera focuses while the shutter button is pressed halfway. [OFF]: No focus operation is performed when the shutter button is pressed halfway.

[SHUTTER AE]

If [ON] is selected, exposure will lock while the shutter button is pressed halfway.

Option	Description
[AF-S/MF]	[ON]: Exposure locks when the shutter button is pressed halfway. [OFF]: Exposure does not lock when the shutter button is pressed halfway.
[AF-C]	[ON]: Exposure locks while the shutter button is pressed halfway. [OFF]: Exposure does not lock when the shutter button is pressed halfway.

[SHOOT WITHOUT CARD]

Choose whether the shutter can be released without a memory card inserted in the camera.

Option	Description
[ON]	When no memory card is inserted, the shutter can be released to test camera function and the shooting and setup menus can be displayed.
[OFF]	The shutter is disabled if no memory card is inserted, preventing accidental loss of pictures taken without a memory card.

[FOCUS RING]

Choose the direction in which the focus ring is rotated to increase the focus distance.

Options
X[CW](clockwise)	Y[CCW](counterclockwise)

[FOCUS RING OPERATION]

Choose how the camera adjusts focus in response to the movement of the focus ring.

Option	Description
[NONLINEAR]	Focus is adjusted at the same rate as the ring is rotated.
[LINEAR]	Focus is adjusted linearly according to the amount the ring is rotated, but the focusing speed is unaffected by the speed the ring is rotated.

[CONTROL RING SETTING]

Set functions assigned to the control ring.

Option	Description
[STANDARD]	The function assigned to the control ring varies with the shooting mode (aThe Control Ring).
[WHITE BALANCE]	Assign white balance to the control ring.
[FILM SIMULATION]	Assign film simulation to the control ring.
[DIGITAL TELE-CONV.]	Assign the digital teleconverter to the control ring.
[OFF]	No function assigned.

[AE/AF-LOCK MODE]

This option determines the behavior of the button to which exposure and/or focus lock is assigned.

Option	Description
[AE&AF ON WHEN PRESSING]	Exposure and/or focus will lock while the button is pressed.
[AE&AF ON/OFF SWITCH]	Exposure and/or focus will lock when the button is pressed and remain locked until it is pressed again.

[AWB-LOCK MODE]

Choose the behavior of function buttons assigned auto white balance (AWB) lock. Auto white balance lock is used to lock white balance at the value metered by the camera when [AUTO] is selected for white balance.

Option	Description
[AWB ON WHEN PRESSING]	Auto white balance locks while the button is pressed.
[AWB ON/OFF SWITCH]	Press the button once to lock auto white balance and again to end the lock.

[APERTURE RING SETTING (A)]

Choose whether the front command dial can be used to adjust aperture when aperture is set to [A] (auto).

Option	Description
[AUTO]	The camera adjusts aperture automatically.
[COMMAND]	Aperture can be adjusted using the front command dial.

a[Fn1 BUTTON SETTING]

Choose the role performed by the [Fn1] button during playback.

Option	Description
a[SMARTPHONE TRANSFER ORDER]	Pressing the button marks the current picture for transfer. If the camera is not currently paired with a smartphone, [Bluetooth/SMARTPHONE SETTING] options will be displayed (a[Bluetooth/SMARTPHONE SETTING]).
d[SELECT & SMARTPHONE TRANSFER ORDER]	Pressing the button displays a dialog where pictures can be selected for upload to a smartphone with which the camera is paired (a[IMAGE TRANSFER ORDER]). If the camera is not currently paired with a smartphone, [Bluetooth/SMARTPHONE SETTING] options will be displayed instead (a[Bluetooth/SMARTPHONE SETTING]).
r[WIRELESS COMMUNICATION]	The button can be used for wireless connections.

[TOUCH SCREEN SETTING]

Enable or disable touch-screen controls.

Option	Description
x[TOUCH SCREEN SETTING]	[ON]: The LCD monitor functions as a touch screen during shooting. [OFF]: Touch controls disabled.
x[DOUBLE TAP SETTING]	[ON]: Tap the LCD monitor twice to zoom in on your subject during shooting. [OFF]: Touch zoom disabled.
c[TOUCH FUNCTION]	Enable or disable touch function gestures.
a[TOUCH SCREEN SETTING]	[ON]: The LCD monitor functions as a touch screen during playback. [OFF]: Touch controls disabled.
[EVF/OVF TOUCH SCREEN AREA SETTINGS]	Select the area of the LCD monitor used for touch controls while the viewfinder is active. The area used for touch controls can be selected from: 6 (all) 0 (right half) 2 (top right quarter) 4 (bottom right quarter) 1 (left half) 3 (top left quarter) 5 (bottom left quarter) Choose [OFF] to disable touch controls while the viewfinder is active.

[LOCK]

Lock selected controls to prevent unintended operation.

Option	Description
[LOCK SETTING]	Choose from the following: [UNLOCK]: Reset lock options. [ALL FUNCTION]: Lock all controls in the [FUNCTION SELECTION] list. [SELECTED FUNCTION]: Lock only the controls selected in the [FUNCTION SELECTION] list.
[FUNCTION SELECTION]	Choose the controls locked when [SELECTED FUNCTION] is chosen for [LOCK SETTING].