• The Shooting Menus
• [IMAGE QUALITY SETTING] (Still Photography)

Enter a search term and click .

Adjust image quality settings for still photography.

---

[IMAGE SIZE]

Choose the size and aspect ratio at which still pictures are recorded.

The following options are available in [SPORTS FINDER MODE] (a[SPORTS FINDER MODE]) and when [1.25X CROP] is selected in burst mode:

[IMAGE QUALITY]

Choose a file format and compression ratio.

Option	Description
[FINE]	Low compression ratios are used for higher-quality images.
[NORMAL]	Higher compression ratios are used to increase the number of images that can be stored.
[FINE + RAW]	Record both RAW and fine-quality JPEG images.
[NORMAL + RAW]	Record both RAW and normal-quality JPEG images.
[RAW]	Record RAW images only.

[RAW RECORDING]

Choose whether to compress RAW images.

Option	Description
[UNCOMPRESSED]	RAW images are not compressed.
[LOSSLESS COMPRESSED]	RAW images are compressed using a reversible algorithm that reduces file size with no loss of image data. The images can be viewed in Capture One Express Fujifilm, RAW FILE CONVERTER EX powered by SILKYPIX, FUJIFILM X RAW STUDIO, or other software that supports “lossless” RAW compression. Quality is the same as [UNCOMPRESSED], but the resulting files are anywhere from about 30 to 90 percent of their uncompressed size.
[COMPRESSED]	RAW images are compressed using a “lossy”, non-reversible algorithm. Quality is about the same as [UNCOMPRESSED], but the resulting files are anywhere from about 25 to 35 percent of their uncompressed size.

[FILM SIMULATION]

Simulate the effects of different kinds of film, including black-and-white (with or without color filters). Choose a palette according to your subject and creative intent.

Option	Description
c [PROVIA/STANDARD]	Ideal for a wide range of subjects.
d [Velvia/VIVID]	Vibrant reproduction, ideal for landscape and nature.
e [ASTIA/SOFT]	Softer color and contrast for a more subdued look.
i [CLASSIC CHROME]	Soft color and enhanced shadow contrast for a calm look.
g [PRO Neg. Hi]	Ideal for portrait with slightly enhanced contrast.
h [PRO Neg. Std]	Ideal for portrait with soft gradations and skin tones.
g [CLASSIC Neg.]	Enhanced color with hard tonality to increase image depth.
X [ETERNA/CINEMA]	Soft color and rich shadow tone suitable for film look movie.
N [ETERNA BLEACH BYPASS]	Unique color with low saturation and high contrast. Suitable for still and movie.
a [ACROS]	Shoot in Black and White In rich details with sharpness. Available with yellow ([Ye]), red ([R]), and green ([G]) filters, which deepen shades of gray corresponding to hues complementary to the selected color. d[ACROS+Ye FILTER]: Slightly enhances contrast and darkens skies. c[ACROS+R FILTER]: Enhances contrast and darkens skies considerably. b[ACROS+G FILTER]: Produces pleasing skin tones in portrait.
b [MONOCHROME]	Shoots in black and white. Available with yellow ([Ye]), red ([R]), and green ([G]) filters, which deepen shades of gray corresponding to hues complementary to the selected color. e[MONOCHROME+Ye FILTER]: Slightly enhances contrast and darkens skies. d[MONOCHROME+R FILTER]: Enhances contrast and darkens skies considerably. f[MONOCHROME+G FILTER]: Produces pleasing skin tones in portrait.
f [SEPIA]	Shoots in sepia tone.

[MONOCHROMATIC COLOR]

[GRAIN EFFECT]

Add a film grain effect.

[ROUGHNESS]

Option	Description
[STRONG]	Choose for rougher grains.
[WEAK]	Choose for smoother grains.
[OFF]	Turn the effect off.

[SIZE]

Option	Description
[LARGE]	Choose for coarser grains.
[SMALL]	Choose for finer grains.

[COLOR CHROME EFFECT]

Increase the range of tones available for rendering colors that tend to be highly saturated, such as reds, yellows, and greens.

Option	Description
[STRONG]	Choose for a strong effect.
[WEAK]	Choose for a weak effect.
[OFF]	Turn the effect off.

[COLOR CHROME FX BLUE]

Increase the range of tones available for rendering blues.

Option	Description
[STRONG]	Choose for a strong effect.
[WEAK]	Choose for a weak effect.
[OFF]	Turn the effect off.

[WHITE BALANCE]

For natural colors, choose a white balance option that matches the light source.

Option	Description
WA[WHITE PRIORITY]	White balance is adjusted automatically. Choose for whiter whites in scenes lit by incandescent bulbs.
[AUTO]	White balance is adjusted automatically.
AA[AMBIENCE PRIORITY]	White balance is adjusted automatically. Choose for warmer whites in scenes lit by incandescent bulbs.
k [CUSTOM 1] l [CUSTOM 2] m [CUSTOM 3]	Measure a value for white balance.
k [COLOR TEMPERATURE]	Choose a color temperature.
i [DAYLIGHT]	For subjects in direct sunlight.
j [SHADE]	For subjects in the shade.
k [FLUORESCENT LIGHT-1]	Use under “daylight” fluorescent lights.
l [FLUORESCENT LIGHT-2]	Use under “warm white” fluorescent lights.
m[] FLUORESCENT LIGHT-3]	Use under “cool white” fluorescent lights.
n [INCANDESCENT]	Use under incandescent lighting.
g [UNDERWATER]	Reduces the blue cast typically associated with underwater lighting.

Fine-Tuning White Balance

Custom White Balance

kColor Temperature

Adjust white balance to match the color temperature of the light source.

1. Select k in the white balance menu.

   The option currently selected for color temperature will be displayed.

   

2. Edit the color temperature using the focus stick (focus lever) and press [MENU/OK].

   A fine-tuning dialog will be displayed.

   

   You can also adjust color temperature in increments of 10 K by rotating the front command dial.

   Choose from values of from 2500 to 10000 K.

   To exit without fine-tuning white balance, press [DISP/BACK] after choosing a color temperature.

3. Highlight a fine-tuning amount using the focus stick.

4. Press [MENU/OK].

   The changes will be applied. The selected color temperature will appear in the display.

   

[DYNAMIC RANGE]

Adjust dynamic range. Wide dynamic ranges reduce loss of detail in highlights for more natural results with high-contrast or backlit scenes.

Option		Description
[AUTO]	V[100％]	Choose for increased contrast. Reduce loss of detail in highlights.
	W[200％]
X[400％]

[D RANGE PRIORITY]

Reduce loss of detail in highlights and shadows for natural-looking results when photographing high-contrast scenes.

Option	Description
[AUTO]	Contrast is adjusted automatically in response to lighting conditions.
[STRONG]	Adjust dynamic range by a large amount for very high-contrast scenes.
[WEAK]	Adjust dynamic range by a smaller amount for moderately high-contrast scenes.
[OFF]	Contrast reduction off.

[TONE CURVE]

Option	Description
[HIGHLIGHTS]	-2 to +4
[SHADOWS]	-2 to +4

[COLOR]

Adjust color density. Choose higher values to increase saturation, lower values to reduce it.

[SHARPNESS]

Sharpen or soften outlines. Choose higher values for sharper outlines, lower values for softer outlines.

[HIGH ISO NR]

Reduce noise in pictures taken at high sensitivities. Choose higher values to reduce noise and smooth outlines, lower values to leave outlines visible.

[CLARITY]

Increase definition while altering tones in highlights and shadows as little as possible. Choose higher values for increased definition, lower values for a softer effect.

[LONG EXPOSURE NR]

Select [ON] to reduce mottling in long time-exposures.

Options
[ON]	[OFF]

[LENS MODULATION OPTIMIZER]

Select [ON] to improve definition by adjusting for diffraction and the slight loss of focus at the periphery of the lens.

Options
[ON]	[OFF]

[COLOR SPACE]

Choose the gamut of colors available for color reproduction.

Option	Description
[sRGB]	Recommended in most situations.
[Adobe RGB]	For commercial printing.

[PIXEL MAPPING]

Use this option if you notice bright spots in your pictures.

1. Press [MENU/OK] in the shooting display and select the H[IMAGE QUALITY SETTING] tab.

2. Highlight [PIXEL MAPPING] and press [MENU/OK] to perform pixel mapping.

[SELECT CUSTOM SETTING]

Recall settings saved to custom settings banks 1 through 7 ([CUSTOM 1] through [CUSTOM 7]) using [EDIT/SAVE CUSTOM SETTING].

Banks
[NOTHING SELECTED]	[CUSTOM 1]	[CUSTOM 2]	[CUSTOM 3]
[CUSTOM 4]	[CUSTOM 5]	[CUSTOM 6]	[CUSTOM 7]

[EDIT/SAVE CUSTOM SETTING]

Adjust settings as desired and save them to a custom settings bank. Saved settings can be recalled using H [IMAGE QUALITY SETTING] > [SELECT CUSTOM SETTING].

Saving Custom Settings

Create a new custom settings bank.

1. Select H [IMAGE QUALITY SETTING] > [EDIT/SAVE CUSTOM SETTING] in the shooting menu and press [MENU/OK].

2. Highlight a destination bank for the new settings ([CREATE NEW] C1 through C7) and press [MENU/OK].

   A confirmation dialog will be displayed.

   

3. Highlight [OK] and press [MENU/OK].

   Current camera settings will be saved to the selected bank.

   

Editing Custom Settings

Edit existing custom settings banks.

1. Select H [IMAGE QUALITY SETTING] > [EDIT/SAVE CUSTOM SETTING] in the shooting menu and press [MENU/OK].

2. Highlight the desired custom settings bank and press [MENU/OK].

   

3. Highlight [EDIT/CHECK] and press [MENU/OK].

   

4. The camera will display a list of shooting menu items; highlight an item you wish to edit and press [MENU/OK].

   Adjust the selected item as desired.

   

5. Press [MENU/OK] to save the changes and return to the shooting menu list.

   Adjust additional items as desired.

   If [DISABLE] is selected for [AUTO UPDATE CUSTOM SETTING], red dots will appear next to the edited items but the changes will not be saved automatically.

   • To save the changes for selected items, highlight the items in the list and press [Q].
   • To save changes for all items, return to Step 3 and select [SAVE THE CHANGES]. To cancel all changes and restore the previous settings, select [RESET THE CHANGES].
   • If you copy an item marked by a red dot, the item will be copied with the changes intact.

Copying Custom Settings

Copy custom settings from one bank to another, overwriting the settings in the destination bank. If the source bank has been renamed, the name will also be copied to the destination bank.

1. Select H [IMAGE QUALITY SETTING] > [EDIT/SAVE CUSTOM SETTING] in the shooting menu and press [MENU/OK].

2. Highlight the source bank and press [MENU/OK].

   

3. Highlight [COPY] and press [MENU/OK].

   

4. Highlight the destination bank ([C1] through [C7]) and press [MENU/OK].

   A confirmation dialog will be displayed.

   

   Any changes to custom settings in the destination bank will be overwritten.

5. Highlight [OK] and press [MENU/OK].

   The selected settings will be copied to the destination bank, overwriting any existing settings.

   

Deleting Custom Settings

Delete settings from selected custom settings banks.

1. Select H [IMAGE QUALITY SETTING] > [EDIT/SAVE CUSTOM SETTING] in the shooting menu and press [MENU/OK].

2. Highlight the desired custom settings bank and press [MENU/OK].

   

3. Highlight [ERASE] and press [MENU/OK].

   A confirmation dialog will be displayed.

   

4. Highlight [OK] and press [MENU/OK].

   Any custom settings saved to the selected bank will be deleted.

   

Renaming Custom Settings Banks

Rename selected custom settings banks.

1. Select H [IMAGE QUALITY SETTING] > [EDIT/SAVE CUSTOM SETTING] in the shooting menu and press [MENU/OK].

2. Highlight the desired custom settings bank and press [MENU/OK].

   

3. Highlight [EDIT CUSTOM NAME] and press [MENU/OK].

   

4. Enter a new name for the custom settings bank and select [SET].

   The selected bank will be renamed.

[AUTO UPDATE CUSTOM SETTING]

Choose whether changes to saved custom settings apply automatically.

Option	Description
[ENABLE]	Changes to custom settings banks [CUSTOM 1] through [CUSTOM 7] apply automatically.
[DISABLE]	Changes do not apply automatically. Any changes to custom settings must be applied manually (aEditing Custom Settings).

xF[MOUNT ADAPTOR SETTING]

Adjust settings for lenses attached via a mount adapter. The camera can store settings for multiple lenses ([LENS 1] through [LENS 6]).

Choosing a Focal Length

Distortion Correction

Color Shading Correction

To use color shading correction, follow the steps below.

1. Rotate the front command dial to choose a corner. The selected corner is indicated by a triangle.

2. Use the focus stick (focus lever) to adjust shading until there is no visible difference in color between the selected corner and the center of the image.

   • Press the focus stick left or right to adjust colors on the cyan–red axis.
   • Press the focus stick up or down to adjust colors on the blue–yellow axis.

Peripheral Illumination Correction

EDIT LENS NAME

Change the lens name.