Program AETo allow the camera to adjust both shutter speed and aperture for optimal exposure, rotate the auto mode selector lever to 
and set shutter speed and aperture to A.
P will appear in the display.
If the subject is outside the metering range of the camera, the shutter speed and aperture displays will show “---”.
Program Shift
If desired, you can press the command control left or right to select other combinations of shutter speed and aperture without altering exposure (program shift).
Shutter speed
Aperture
The new values for shutter speed and aperture are shown in yellow. Program shift is not available if an option other than 
(off) is selected for flash mode or if an auto option is selected for DYNAMIC RANGE in the shooting menu. To cancel program shift, turn the camera off.
.
