Accessories from Fujifilm

The following optional accessories are available from Fujifilm. For the latest information on the accessories available in your region, check with your local Fujifilm representative or visit “Digital Cameras”.

Rechargeable Li-ion batteries: NP-W126/NP-W126S: Additional high-capacity NP-W126/NP-W126S rechargeable batteries can be purchased as required.

Battery chargers: BC-W126/BC-W126S: Replacement battery chargers can be purchased as required. At +20 °C/+68 °F, the BC-W126/BC-W126S charges an NP-W126/NP-W126S in about 150 minutes.

DC couplers: CP-W126: For extended shooting or playback or when using the camera with a computer, use the CP-W126 to connect the camera to the AC-9V power adapter.

AC power adapters: AC-9V (requires CP-W126 DC coupler): Use this 100–240 V, 50/60 Hz AC power adapter for extended shooting and playback or when copying pictures to a computer.

Remote releases: RR-100: Use to reduce camera shake or keep the shutter open during a time exposure (⌀2.5 mm).

Stereo microphones: MIC-ST1: An external microphone for movie recording.

FUJINON lenses: XF-/XC-series lenses: Interchangeable lenses for use exclusively with the FUJIFILM X-mount.; FUJINON MKX-series lenses: Cinema lenses for the FUJIFILM X-mount.

Macro extension tubes: MCEX-11/16: Attach between the camera and the lens to shoot at high reproduction ratios.

Teleconverters: XF1.4X TC WR: Increases the focal length of the compatible lenses by about 1.4×.; XF2X TC WR: Increases the focal length of the compatible lenses by about 2.0×.

Mount adapters: FUJIFILM M MOUNT ADAPTER: Allows the camera to be used with a wide selection of M-mount lenses.

Body caps: BCP-001: Cover the camera lens mount when no lens is attached.

Shoe-mounted flash units: EF-X500: In addition to manual and TTL flash control, this clip-on flash unit has a Guide Number of 50/164 (ISO 100, m/ft.) and supports FP (high-speed sync), allowing it to be used at shutter speeds that exceed the flash sync speed. Featuring support for the optional EF-BP1 battery pack and Fujifilm optical wireless flash control, it can be used as a master or remote flash unit for remote wireless flash photography.; EF-BP1: A battery pack for shoe-mounted flash units. Takes up to 8 AA batteries.; EF-42: This clip-on flash unit has a Guide Number of 42/137 (ISO 100, m/ft.) and supports manual and TTL flash control.; EF-X20: This clip-on flash unit has a Guide Number of 20/65 (ISO 100, m/ft.) and supports manual and TTL flash control.; EF-20: This clip-on flash unit has a Guide Number of 20/65 (ISO 100, m/ft.) and supports TTL flash control (manual flash control is not supported).

Tripod grips: TG‑BT1: Record movies, take photographs, or adjust zoom on compatible power zoom lenses while holding this Bluetooth tripod grip.

Hand grips: MHG-XT10: Features an improved grip. Batteries and memory cards can be removed with the grip in place, and the grip is equipped with a rail for quick-shoe camera mounts.

Leather cases: BLC-XT10: This case combines practicality with the luxury of leather and comes with a shoulder strap made of the same material, as well as a cloth that can be used to wrap the camera before putting it in the case and on other occasions. Pictures can be taken and batteries inserted or removed with the camera still in its case.

Grip belts: GB-001: Improves grip. Combine with a hand grip for more secure handling.

instax SHARE printers: SP-1/SP-2/SP-3: Connect via wireless LAN to print pictures on instax film.