• Shortcuts
• The Fn (Function) Buttons

Enter a search term and click .

Assign a role to the function buttons for quick access to the selected feature.

---

• Assigning Roles to the Function Buttons
• Lens Function Buttons

The default assignments are:

Assigning Roles to the Function Buttons

To assign roles to the buttons:

1. Press and hold the DISP/BACK button until a control selection menu is displayed.

   

2. Highlight a control and press MENU/OK.

3. Highlight the desired role and press MENU/OK to assign it to the selected control. Choose from:

   IMAGE SIZE

   IMAGE QUALITY

   RAW

   FILM SIMULATION

   GRAIN EFFECT

   COLOR CHROME EFFECT

   DYNAMIC RANGE

   D RANGE PRIORITY

   WHITE BALANCE

   SELECT CUSTOM SETTING

   FOCUS AREA

   FOCUS CHECK

   AF MODE

   AF-C CUSTOM SETTINGS

   FACE SELECT op

   FACE DETECTION ON/OFF

   AF RANGE LIMITER

   DRIVE SETTING

   SPORTS FINDER MODE

   PRE-SHOTsJ

   SELF-TIMER

   SHUTTER TYPE

   FLICKER REDUCTION

   ISO AUTO SETTING

   IS MODE

   WIRELESS COMMUNICATION

   FLASH FUNCTION SETTING

   TTL-LOCK

   MODELING FLASH

   FULL HD HIGH SPEED REC

   ZEBRA SETTING

   INTERNAL/EXTERNAL MIC LEVEL ADJUSTMENT

   MOVIE SILENT CONTROL

   PREVIEW DEPTH OF FIELD

   PREVIEW EXP./WB IN MANUAL MODE

   NATURAL LIVE VIEW

   HISTOGRAM

   ELECTRONIC LEVEL

   LARGE INDICATORS MODE

   ZOOM/FOCUS CONTROL RING

   CONSTANT SPEED ZOOM (T)

   CONSTANT SPEED ZOOM (W)

   FCONSTANT SPEED FOCUS (N)

   FCONSTANT SPEED FOCUS (F)

   AE LOCK ONLY

   AF LOCK ONLY

   AE/AF LOCK

   AF-ON

   AWB LOCK ONLY

   APERTURE SETTING

   PERFORMANCE

   AUTO IMAGE TRANSFER ORDER

   SELECT PAIRING DESTINATION

   Bluetooth ON/OFF

   PLAYBACK

   NONE

AF‑ON

If AF-ON is selected, you can press the control instead of keeping the shutter button pressed halfway.

MODELING FLASH

If MODELING FLASH is selected when a compatible shoe-mounted flash unit is attached, you can press the control to test-fire the flash and check for shadows and the like (modeling flash).

TTL-LOCK

If TTL-LOCK is selected, you can press the control to lock flash output according to the option selected for FFLASH SETTING > TTL-LOCK MODE (aTTL-LOCK MODE).

FACE SELECT op

The following features can be accessed using the focus stick or during viewfinder photography when FACE SELECT op is enabled:

• The face used to set focus can be selected using the focus stick. To switch from face detection to manual focus-area selection, press the center of the focus stick (focus lever). Press again to re-enable face detection.
• The touch screen (monitor) or focus stick can be used to select the face used to set focus during viewfinder photography.

Lens Function Buttons

Choose the roles played by the function buttons on the lens (where applicable).

Lens Function Button Defaults

The default assignments are:

Lens function buttons	Default
AZ/F	ZOOM/FOCUS CONTROL RING
BL-Fn1 (rocker zoom button pressed up)	CONSTANT SPEED ZOOM (T)
CL-Fn2 (rocker zoom button pressed down)	CONSTANT SPEED ZOOM (W)

Assigning Roles to the Lens Function Buttons

The roles played by the lens function buttons can be selected using the DBUTTON/DIAL SETTING > POWER ZOOM LENS FUNCTION (Fn) SETTING option in the setup menu.

Power Zoom Lenses

Zoom can be adjusted on power zoom lenses using the zoom/focus control ring, zoom button, or zoom ring.

Control	Description
AZoom ring	Rotate the zoom ring to zoom in or out manually.
BZoom/focus control ring	Rotate the zoom/focus control ring to zoom in or out using powered zoom. The zoom speed is proportional to the speed with which the ring is rotated.
CZ/F (zoom/focus) button	Switch the role of zoom/focus control ring from focus to zoom or vice versa.
DZoom buttons	Press a zoom button to zoom in or out at a steady speed using powered zoom. Zoom ends when the button is pressed a second time.