.FThe Shooting Menus (FLASH SETTING)
Adjust flash-related settings.
To display flash-related settings, press MENU/OK in the shooting display and select the F (FLASH SETTING) tab.
The options available vary with the shooting mode selected.
FLASH FUNCTION SETTING
Choose a flash control mode, flash mode, or sync mode or adjust the flash level. The options available vary with the flash.
For more information on flash settings, see “External Flash Units” in “Peripherals and Optional Accessories”.
RED EYE REMOVAL
Remove red-eye effects caused by the flash.
| Option | Description |
|---|---|
| FLASH+REMOVAL | A red-eye reduction pre-flash is combined with digital red-eye removal. |
| FLASH | Flash red-eye reduction only. |
| REMOVAL | Digital red-eye removal only. |
| OFF | Flash red-eye reduction and digital red-eye removal off. |
Flash red-eye reduction can be used in TTL flash control mode.
Digital red-eye removal is performed only when a face is detected.
Digital red-eye removal is not available with RAW images.
TTL-LOCK MODE
Instead of adjusting flash level with each shot, TTL flash control can be locked for consistent results across a series of photographs.
| Option | Description |
|---|---|
| LOCK WITH LAST FLASH | Flash output is locked at the value metered for the most recent photo. |
| LOCK WITH METERING FLASH | The camera emits a series of pre-flashes and locks flash output at the metered value. |
To use TTL lock, assign TTL-LOCK to a camera control and then use the control to enable or disable TTL lock (aAssigning Roles to the Function Buttons).
Flash compensation can be adjusted while TTL lock is in effect.
Selecting LOCK WITH LAST FLASH displays an error message if no previously metered value exists.
LED LIGHT SETTING
Choose whether to use the flash unit’s LED video light (if available) as a catchlight or AF-assist illuminator when taking photos.
| Option | Role of LED video light in still photography |
|---|---|
| CATCHLIGHT | Catchlight |
| AF ASSIST | AF-assist illuminator |
| AF ASSIST+CATCHLIGHT | AF-assist illuminator and catchlight |
| OFF | None |
In some cases, this option can also be accessed via the FLASH FUNCTION SETTING menu.
MASTER SETTING
Choose a flash group (A, B, or C) for the flash mounted on the camera hot shoe when it functions as a master flash controlling remote flash units via Fujifilm wireless optical flash control, or choose OFF to limit master flash output to a level that does not affect the final picture.
| Options | |||
|---|---|---|---|
| Gr A | Gr B | Gr C | OFF |
In some cases, this option can also be accessed via the FLASH FUNCTION SETTING menu.
CH SETTING
Choose the channel used for communication between the master flash and remote flash units when using Fujifilm optical wireless flash control. Separate channels can be used for different flash systems or to prevent interference when multiple systems are operating in close proximity.
| Options | |||
|---|---|---|---|
| CH1 | CH2 | CH3 | CH4 |
