This website uses cookies. By using the site you are agreeing to our Privacy Policy.

Enter a search term and click .

Assign roles to [AE‑L], [AF‑L], and function buttons for quick access to selected features.


The default assignments are:

Fn1 button
Face/eye detection settings
Fn2 button
Drive settings
Fn3 button
AF mode
Fn4 button
Film simulation
Fn5 button
White balance
Fn6 button
Performance
[AE‑L] button
Exposure lock
[AF‑L] button
Focus lock
Center of rear command dial
Focus check

Assigning Roles to the Function Buttons

To assign roles to the buttons:

  1. Press and hold the [DISP]/[BACK] button until a button selection menu is displayed.

  2. Highlight a button and press [MENU]/[OK].

  3. Highlight the desired role and press [MENU]/[OK] to assign it to the selected button. Choose from:

    [IMAGE SIZE]

    [IMAGE QUALITY]

    [RAW]

    [FILM SIMULATION]

    [GRAIN EFFECT]

    [DYNAMIC RANGE]

    [WHITE BALANCE]

    [SELECT CUSTOM SETTING]

    [FOCUS AREA]

    [FOCUS CHECK]

    [AF MODE]

    [AF-C CUSTOM SETTINGS]

    [FACE/EYE DETECTION SETTING]

    [DRIVE SETTING]

    [SELF-TIMER]

    [SHUTTER TYPE]

    [FLICKER REDUCTION]

    [ISO AUTO SETTING]

    [WIRELESS COMMUNICATION]

    [FLASH FUNCTION SETTING]

    [TTL-LOCK]

    [MODELING FLASH]

    [FULL HD HIGH SPEED REC]

    [MIC LEVEL ADJUSTMENT]

    [PREVIEW DEPTH OF FIELD]

    [PREVIEW EXP./WB IN MANUAL MODE]

    [PREVIEW PIC. EFFECT]

    [HISTOGRAM]

    [LARGE INDICATORS MODE]

    [AE LOCK ONLY

    [AF LOCK ONLY]

    [AE/AF LOCK]

    [AF-ON]

    [APERTURE SETTING]

    [LOCK SETTING]

    [PERFORMANCE]

    [PLAYBACK]

    [NONE] (control disabled)

Button assignments can also be selected using [BUTTON/DIAL SETTING] > [Fn/AE‑L/AF‑L BUTTON SETTING]. The selector can not be assigned more than one role at a time.

[AF‑ON]

If [AF‑ON] is selected, you can press the control instead of keeping the shutter button pressed halfway.

[MODELING FLASH]

If [MODELING FLASH] is selected, you can press the control to test-fire the flash (modeling flash).

[TTL-LOCK]

If [TTL-LOCK] is selected, you can press the control to lock flash output according to the option selected for [FLASH SETTING] > [TTL-LOCK MODE] ([TTL-LOCK MODE]).