Make changes to display settings.
To access display settings, press [MENU]/[OK], select the ([SET UP]) tab, and choose [SCREEN SET-UP].
Adjust the brightness of the display in the electronic viewfinder. Select [MANUAL] to choose from 13 options from +5 (bright) to −7 (dark), or select [AUTO] for automatic brightness adjustment.
Options | |
---|---|
[MANUAL] | [AUTO] |
Adjust the hue of the display in the electronic viewfinder. Choose from 11 options between +5 and −5.
Options | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
[+5] | [+4] | [+3] | [+2] | [+1] | [0] | [-1] | [-2] | [-3] | [-4] | [-5] |
Adjust monitor brightness. Choose from 11 options between +5 and −5.
Options | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
[+5] | [+4] | [+3] | [+2] | [+1] | [0] | [-1] | [-2] | [-3] | [-4] | [-5] |
Adjust monitor hue. Choose from 11 options between +5 and −5.
Options | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
[+5] | [+4] | [+3] | [+2] | [+1] | [0] | [-1] | [-2] | [-3] | [-4] | [-5] |
Choose how long images are displayed after shooting. Colors may differ slightly from those in the final image and “noise” mottling may be visible at high sensitivities.
Option | Description |
---|---|
[CONTINUOUS] | Pictures are displayed until the [MENU]/[OK] button is pressed or the shutter button is pressed halfway. To zoom in on the active focus point, press the center of the rear command dial; press again to cancel zoom. |
[1.5 SEC] | Pictures are displayed for the selected time or until the shutter button is pressed halfway. |
[0.5 SEC] | |
[OFF] | Pictures are not displayed after shooting. |
Choose whether the indicators in the viewfinder and LCD monitor rotate to match camera orientation.
Options | |
---|---|
[ON] | [OFF] |
Select [PREVIEW EXP./WB] to enable exposure and white balance preview in manual exposure mode, or choose [PREVIEW WB] to preview only white balance. Select [OFF] when using a flash or on other occasions on which exposure may change when the picture is taken.
Options | ||
---|---|---|
[PREVIEW EXP./WB] | [PREVIEW WB] | [OFF] |
Choose [ON] to preview the effects of film simulation, white balance, and other settings in the monitor, [OFF] to make shadows in low-contrast, back-lit scenes and other hard-to-see subjects more visible.
Options | |
---|---|
[ON] | [OFF] |
If [OFF] is selected, the effects of camera settings will not be visible in the monitor and colors and tone will differ from those in the final picture. The display will however be adjusted to show the effects of advanced filters and of monochrome and sepia settings.
Choose a framing grid for shooting mode.
Option | |||
---|---|---|---|
[GRID 9] | [GRID 24] | [HD FRAMING] | |
Display | |||
For “rule of thirds” composition. | A six-by-four grid. | Frame HD pictures in the crop shown by the lines at the top and bottom of the display. |
Framing guides are not shown at default settings but can be displayed using [SCREEN SET-UP] > [DISP. CUSTOM SETTING] ([DISP. CUSTOM SETTING]).
Choose [ON] to automatically rotate “tall” (portrait-orientation) pictures during playback.
Options | |
---|---|
[ON] | [OFF] |
Choose the units used for the focus distance indicator.
Options | |
---|---|
[METERS] | [FEET] |
Choose whether the camera displays aperture as a T-number (used for movie camera lenses) or an f/-number (used for still camera lenses) when an optional FUJINON MKX-series lens is attached. For information on using cinema lenses, see the documentation provided with the lens.
Option | Description |
---|---|
[T NUMBER] | A measure of lens aperture commonly used by cinematographers. Lens transmittance is taken into account to better calculate exposure. |
[F NUMBER] | A measure of lens aperture commonly used by photographers. Lens transmittance is assumed to be 100%, meaning that the same aperture may produce different exposures depending on the lens. |
Choose the content of the two windows in the dual display.
Option | Description |
---|---|
[R:FOCUS L:FRAME] | The right (small) window shows a close-up of the focus area, while the left (large) window shows the entire frame. |
[R:FRAME L:FOCUS] | The right (small) window shows the entire frame, while the left (large) window shows a close-up of the focus area. |
Choose the items shown in the standard display.
In shooting mode, press [DISP]/[BACK] until standard indicators are displayed.
Press [MENU]/[OK] and select [SCREEN SET-UP] > [DISP. CUSTOM SETTING] in the ([SET UP]) tab.
Highlight items and press [MENU]/[OK] to select or deselect.
Item | Default |
---|---|
[FRAMING GUIDELINE] | |
[ELECTRONIC LEVEL] | |
[FOCUS FRAME] | |
[AF DISTANCE INDICATOR] | |
[MF DISTANCE INDICATOR] | |
[HISTOGRAM] | |
[SHOOTING MODE] | |
[APERTURE/S-SPEED/ISO] | |
[INFORMATION BACKGROUND] | |
[Expo. Comp. (Digit)] | |
[Expo. Comp. (Scale)] | |
[FOCUS MODE] | |
[PHOTOMETRY] | |
[SHUTTER TYPE] | |
[FLASH] | |
[CONTINUOUS MODE] | |
[DUAL IS MODE] | |
[WHITE BALANCE] | |
[FILM SIMULATION] | |
[DYNAMIC RANGE] | |
[BOOST MODE] | |
[FRAMES REMAINING] | |
[IMAGE SIZE/QUALITY] | |
[MOVIE MODE & REC. TIME] | |
[MIC LEVEL] | |
[BATTERY LEVEL] | |
[FRAMING OUTLINE] |
Press [DISP]/[BACK] to save changes.
Press [DISP]/[BACK] as needed to exit the menus and return to the shooting display.
Select [ON] to display large indicators in the electronic viewfinder. The indicators displayed can be selected using [SCREEN SETTING] > [LARGE INDICATORS DISP. SETTING].
[OFF] | [ON] |
---|
Some icons are not displayed when [ON] is selected for [LARGE INDICATORS MODE(EVF)], including:
If [LARGE INDICATORS MODE] is assigned to a function button, the button can be used to toggle [LARGE INDICATORS MODE] on ([ON]) and off ([OFF]) ([Fn/AE-L/AF-L BUTTON SETTING], Assigning Roles to the Function Buttons).
Select [ON] to display large indicators in the LCD monitor. The indicators displayed can be selected using [SCREEN SETTING] > [LARGE INDICATORS DISP. SETTING].
[OFF] | [ON] |
---|
Some icons are not displayed when [ON] is selected for [LARGE INDICATORS MODE(LCD)], including:
If [LARGE INDICATORS MODE] is assigned to a function button, the button can be used to toggle [LARGE INDICATORS MODE] on ([ON]) and off ([OFF]) ([Fn/AE-L/AF-L BUTTON SETTING], Assigning Roles to the Function Buttons).
Choose the indicators displayed when [ON] is selected for [SCREEN SETTING] > [LARGE INDICATORS MODE(EVF)] or [LARGE INDICATORS MODE(LCD)].
Option | Description |
---|---|
[Expo. DISP.] |
Choose the items listed at the bottom of the display. Selected items are indicated by check marks (); to deselect, highlight the check marks and press [MENU/OK]. |
[Scale] |
Select [ON] to display the exposure indicator. |
[L1], [L2], [L3], [L4] |
Choose up to four large icons for display on the left side of the screen. |
[R1], [R2], [R3], [R4] |
Choose up to four large icons for display on the right side of the screen. |