.Sensitivity
Adjust the camera’s sensitivity to light.
To view sensitivity settings, press the [ISO] button.
| Option | Description |
|---|---|
| [AUTO1] [AUTO2] [AUTO3] |
Sensitivity is automatically adjusted in response to shooting conditions. |
| [160]–[12800] | Adjust sensitivity manually. Selected value is shown in display. |
| [L] ([80]) [L] ([100]) [L] ([125]) [H] ([25600]) [H] ([51200]) |
Choose for special situations. Note that mottling may appear in pictures taken at [H], while [L] reduces dynamic range. |
Sensitivity is not reset when the camera is turned off.
Pressing the [ISO] button in F (movie) mode displays the B [MOVIE SETTING] > F [ISO] item in the movie menus.
Adjusting Sensitivity
High values can be used to reduce blur when lighting is poor, while lower values allow slower shutter speeds or wider apertures in bright light; note, however, that mottling may appear in pictures taken at high sensitivities.
Auto Sensitivity ([A])
Choose the base sensitivity, maximum sensitivity, and minimum shutter speed for [AUTO1], [AUTO2], and [AUTO3].
Options
| Item | Options |
|---|---|
| [DEFAULT SENSITIVITY] | 160–12800 |
| [MAX. SENSITIVITY] | 400–12800 |
| [MIN. SHUTTER SPEED] | 1/500–1/4 SEC, AUTO |
Default
| Item | [AUTO1] | [AUTO2] | [AUTO3] |
|---|---|---|---|
| [DEFAULT SENSITIVITY] | 160 | ||
| [MAX. SENSITIVITY] | 800 | 3200 | 12800 |
| [MIN. SHUTTER SPEED] | AUTO | ||
The camera automatically chooses a sensitivity between the default and maximum values; sensitivity is only raised above the default value if the shutter speed required for optimal exposure would be slower than the value selected for [MIN. SHUTTER SPEED].
If the value selected for [DEFAULT SENSITIVITY] is higher than that selected for [MAX. SENSITIVITY], [DEFAULT SENSITIVITY] will be set to the value selected for [MAX. SENSITIVITY].
The camera may select shutter speeds slower than [MIN. SHUTTER SPEED] if pictures would still be underexposed at the value selected for [MAX. SENSITIVITY].
If [AUTO] is selected for [MIN. SHUTTER SPEED], the camera will automatically choose a minimum shutter speed fast enough to prevent blur caused by subject motion or camera shake (the minimum shutter speed is not affected by the option selected for image stabilization).
