• The Shooting Menus
• The Shooting Menus ([IMAGE QUALITY SETTING])

Enter a search term and click .

Adjust image quality settings.

---

[IMAGE SIZE]

Choose the size and aspect ratio at which still pictures are recorded.

[IMAGE QUALITY]

Choose a file format and compression ratio. Select [FINE] or [NORMAL] to record JPEG images, [RAW] to record RAW images, or [FINE+RAW] or [NORMAL+RAW] to record both JPEG and RAW images. [FINE] and [FINE+RAW] use lower JPEG compression ratios for higher-quality JPEG images, while [NORMAL] and [NORMAL+RAW] use higher JPEG compression ratios to increase the number of images that can be stored.

[RAW RECORDING]

Choose whether to compress RAW images.

Option	Description
[UNCOMPRESSED]	RAW images are not compressed.
[LOSSLESS COMPRESSED]	RAW images are compressed using a reversible algorithm that reduces file size with no loss of image data. The images can be viewed in [RAW FILE CONVERTER EX 2.0], [FUJIFILM X RAW STUDIO], or other software that supports “lossless” RAW compression.

[FILM SIMULATION]

Simulate the effects of different kinds of film, including black-and-white (with or without color filters). Choose a palette according to your subject and creative intent.

Option	Description
[PROVIA/STANDARD]	Standard color reproduction. Suited to a wide range of subjects, from portraits to landscapes.
[Velvia/VIVID]	A high-contrast palette of saturated colors, suited to nature photos.
[ASTIA/SOFT]	Enhances the range of hues available for skin tones in portraits while preserving the bright blues of daylight skies. Recommended for outdoor portrait photography.
[CLASSIC CHROME]	Soft color and enhanced shadow contrast for a calm look.
[PRO Neg. Hi]	Offers slightly more contrast than [PRO Neg. Std]. Recommended for outdoor portrait photography.
[PRO Neg. Std]	A soft-toned palette. The range of hues available for skin tones is enhanced, making this a good choice for studio portrait photography.
ETERNA/CINEMA	Film movies using a palette that features subdued colors and deep shadows.
[ACROS] *	Take black-and-white photos with rich gradation and outstanding sharpness.
[MONOCHROME] *	Take pictures in standard black and white.
[SEPIA]	Take pictures in sepia.

* Available with yellow ([Ye]), red ([R]), and green ([G]) filters, which deepen shades of gray corresponding to hues complementary to the selected color. The yellow ([Ye]) filter deepens purples and blues and the red ([R]) filter blues and greens. The green ([G]) filter deepens reds and browns, including skin tones, making it a good choice for portraits.

[GRAIN EFFECT]

Add a film grain effect. Select an amount ([STRONG] or [WEAK]) or choose [OFF] to turn film grain off.

Options
[STRONG]	[WEAK]	[OFF]

[DYNAMIC RANGE]

Control contrast. Choose lower values to increase contrast when shooting indoors or under overcast skies, higher values to reduce loss of detail in highlights when photographing high-contrast scenes. Higher values are recommended for scenes that include both sunlight and deep shade, for such high-contrast subjects as sunlight on water, brightly-lit autumn leaves, and portraits taken against a blue sky, and for white objects or people wearing white; note, however, that mottling may appear in pictures taken at higher values.

Options
[AUTO]	[100%]	[200%]	[400%]

[D RANGE PRIORITY]

Reduce loss of detail in highlights and shadows for natural-looking results when photographing high-contrast scenes.

Option	Description
[AUTO]	Contrast is adjusted automatically in response to lighting conditions.
[STRONG]	Adjust dynamic range by a large amount for very high-contrast scenes.
[WEAK]	Adjust dynamic range by a smaller amount for moderately high-contrast scenes.
[OFF]	Contrast reduction off.

[WHITE BALANCE]

For natural colors, choose a white balance option that matches the light source.

Option	Description
[AUTO]	White balance is adjusted automatically.
//	Measure a value for white balance.
	Choose a color temperature.
	For subjects in direct sunlight.
	For subjects in the shade.
	Use under “daylight” fluorescent lights.
	Use under “warm white” fluorescent lights.
	Use under “cool white” fluorescent lights.
	Use under incandescent lighting.
	Reduces the blue cast typically associated with underwater lighting.

Fine-Tuning White Balance

Custom White Balance

If “[COMPLETED!]” is displayed, press [MENU]/[OK] to set white balance to the measured value.

If “[UNDER]” is displayed, raise exposure compensation and try again.

If “[OVER]” is displayed, lower exposure compensation and try again.

: Color Temperature

[HIGHLIGHT TONE]

Adjust the appearance of highlights. Choose from seven options between +4 and −2.

[SHADOW TONE]

Adjust the appearance of shadows. Choose from seven options between +4 and −2.

[COLOR]

Adjust color density. Choose from nine options between +4 and −4.

[SHARPNESS]

Sharpen or soften outlines. Choose from nine options between +4 and −4.

[NOISE REDUCTION]

Reduce noise in pictures taken at high sensitivities. Choose from nine options between +4 and −4.

[LONG EXPOSURE NR]

Select [ON] to reduce mottling in long time-exposures.

[LENS MODULATION OPTIMIZER]

Select [ON] to improve definition by adjusting for diffraction and the slight loss of focus at the periphery of the lens.

[COLOR SPACE]

Choose the gamut of colors available for color reproduction.

Option	Description
[sRGB]	Recommended in most situations.
[Adobe RGB]	For commercial printing.

[PIXEL MAPPING]

Use this option if you notice bright spots in your pictures.

1. Press [MENU]/[OK] in the shooting display and select the [IMAGE QUALITY SETTING] tab.

2. Highlight [PIXEL MAPPING] and press [MENU]/[OK] to perform pixel mapping. Processing may take a few seconds.

[SELECT CUSTOM SETTING]

Recall settings saved with [EDIT/SAVE CUSTOM SETTING]. Settings can be recalled from any of the seven custom settings banks.

[EDIT/SAVE CUSTOM SETTING]

Save up to 7 sets of custom camera settings for commonly-encountered situations. Saved settings can be recalled using [IMAGE QUALITY SETTING] > [SELECT CUSTOM SETTING].

1. Press [MENU]/[OK] in shooting mode to display the shooting menu. Select the [IMAGE QUALITY SETTING] tab, then highlight [EDIT/SAVE CUSTOM SETTING] and press [MENU]/[OK].

2. Highlight a custom settings bank and press [MENU]/[OK] to select.

   

3. Adjust the following as desired:

   • [DYNAMIC RANGE]
   • [D RANGE PRIORITY]
   • [FILM SIMULATION]
   • [GRAIN EFFECT]
   • [WHITE BALANCE]
   • [HIGHLIGHT TONE]
   • [SHADOW TONE]
   • [COLOR]
   • [SHARPNESS]
   • [NOISE REDUCTION]

   

4. Press [DISP]/[BACK]. A confirmation dialog will be displayed; highlight [OK] and press [MENU]/[OK].