Accessories from Fujifilm
The following optional accessories are available from Fujifilm. For the latest information on the accessories available in your region, check with your local Fujifilm representative or visit “Accessories”.
- Rechargeable Li-ion batteries
- NP‑W126S: Additional high-capacity NP‑W126S rechargeable batteries can be purchased as required.
- Battery chargers
- BC‑W126S: Replacement battery chargers can be purchased as required. At +20 °C/+68 °F, the BC-W126S charges an NP‑W126S in about 150 minutes.
- AC power adapters
- AC-9V (requires CP-W126 DC coupler): Use this 100–240 V, 50/60 Hz AC power adapter for extended shooting and playback or when copying pictures to a computer.
- DC couplers
- CP‑W126: For extended shooting or playback or when using the camera with a computer, use the CP-W126 to connect the camera to the AC-9V power adapter.
- Remote releases
- RR‑100: Use to reduce camera shake or keep the shutter open during a time exposure. The RR-100 has a connector with a diameter of 2.5 mm; a third-party ⌀2.5 mm to 3.5 mm adapter is required for connection to the camera.
- Stereo microphones
- MIC‑ST1: An external microphone for movie recording.
- FUJINON lenses
- XF‑/XC-series lenses: Interchangeable lenses for use exclusively with the FUJIFILM X-mount.
- Macro extension tubes
- MCEX‑11/16: Attach between the camera and the lens to shoot at high reproduction ratios.
- Teleconverters
- XF1.4X TC WR: Increases the focal length of the compatible lenses by about 1.4×.
- XF2X TC WR: Increases the focal length of the compatible lenses by about 2.0×.
- Mount adapters
- FUJIFILM M MOUNT ADAPTER: Allows the camera to be used with a wide selection of M-mount lenses.
- Body caps
- BCP‑001: Cover the camera lens mount when no lens is attached.
- Shoe-mounted flash units
- EF‑X500: This clip-on flash unit has a Guide Number of 50/164 (ISO 100, m/ft.) and is powered by four AA batteries or an optional EF‑BP1 battery pack.
- EF-BP1: A battery pack for shoe-mounted flash units. Takes up to 8 AA batteries.
- EF‑42: This clip-on flash unit has a Guide Number of 42/137 (ISO 100, m/ft.) and supports manual and TTL flash control.
- EF‑X20: This clip-on flash unit has a Guide Number of 20/65 (ISO 100, m/ft.) and supports manual and TTL flash control.
- EF‑20: This clip-on flash unit has a Guide Number of 20/65 (ISO 100, m/ft.) and supports TTL flash control (manual flash control is not supported).
- Grip belts
- GB‑001: Offers an enhanced grip.
- instax SHARE printers
- SP‑1/SP-2/SP-3: Connect via wireless LAN to print pictures on instax film.