.The Shooting Menus (FFLASH SETTING)
Adjust flash-related settings.
To display flash-related settings, press MENU/OK in the shooting display and select the F (FLASH SETTING) tab.
The options available vary with the shooting mode selected.
FLASH FUNCTION SETTING
Choose a flash control mode, flash mode, or sync mode or adjust the flash level. The options available vary with the flash.
See “External Flash Units” for more information.
RED EYE REMOVAL
Remove red-eye effects caused by the flash.
| Option | Description |
|---|---|
| FLASH + REMOVAL | A red-eye reduction pre-flash is combined with digital red-eye removal. |
| FLASH | Flash red-eye reduction only. |
| REMOVAL | Digital red-eye removal only. |
| OFF | Flash red-eye reduction and digital red-eye removal off. |
Flash red-eye reduction can be used in TTL flash control mode. Digital red-eye removal is performed only when a face is detected and is not available with RAW images.
TTL-LOCK MODE
Instead of adjusting flash level with each shot, TTL flash control can be locked for consistent results across a series of photographs.
| Option | Description |
|---|---|
| LOCK WITH LAST FLASH | Flash output is locked at the value metered for the most recent photo. An error message will be displayed if no previously metered value exists. |
| LOCK WITH METERING FLASH | The camera emits a series of pre-flashes and locks flash output at the metered value. |
To use TTL lock, assign TTL-LOCK to a camera control and then use the control to enable or disable TTL lock (aAssigning Roles to the Function Buttons).
Flash compensation can be adjusted while TTL lock is in effect.
LED LIGHT SETTING
Choose whether to use the flash unit’s LED video light (if available) as a catchlight or AF-assist illuminator when taking photos.
| Option | Role of LED video light in still photography |
|---|---|
| CATCHLIGHT | Catchlight |
| AF ASSIST | AF-assist illuminator |
| AF ASSIST + CATCHLIGHT | AF-assist illuminator and catchlight |
| OFF | None |
This option can also be accessed via the flash settings menu.
MASTER SETTING
Choose a flash group (A, B, or C) for the flash mounted on the camera hot shoe when it functions as a master flash controlling remote flash units via FUJIFILM wireless optical flash control, or choose OFF to limit master flash output to a level that does not affect the final picture.
| Options | |||
|---|---|---|---|
| Gr A | Gr B | Gr C | OFF |
This option can also be accessed via the flash settings menu.
CH SETTING
Choose the channel used for communication between the master flash and remote flash units when using FUJIFILM optical wireless flash control. Separate channels can be used for different flash systems or to prevent interference when multiple systems are operating in close proximity.
| Options | |||
|---|---|---|---|
| CH1 | CH2 | CH3 | CH4 |
