• The Setup Menus
• [SCREEN SETTING]

Enter a search term and click .

Make changes to display settings.

---

---

[VIEW MODE SETTING]

Adjust settings for eye sensor, EVF (electronic viewfinder), or LCD monitor view modes (aChoosing a Display Mode).

[EVF BRIGHTNESS]

Adjust the brightness of the display in the electronic viewfinder.

Option	Description
[AUTO]	Automatic brightness adjustment.
[MANUAL]	Adjust brightness manually; choose from options between −7 and +5.

[EVF COLOR]

Adjust the hue of the display in the electronic viewfinder.

[EVF COLOR ADJUSTMENT]

Adjust the color of the display in the electronic viewfinder.

1. Adjust colors using the focus stick (focus lever).

   

2. Press [MENU/OK].

[LCD BRIGHTNESS]

Adjust monitor brightness.

[LCD COLOR]

Adjust monitor hue.

[LCD COLOR ADJUSTMENT]

Adjust the color of the display in the LCD monitor.

1. Adjust colors using the focus stick (focus lever).

2. Press [MENU/OK].

[IMAGE DISP.]

Choose how long images are displayed after shooting.

Option	Description
[CONTINUOUS]	Pictures are displayed until the [MENU/OK] button is pressed or the shutter button is pressed halfway. To zoom in on the active focus point, press the center of the focus stick (focus lever); press again to cancel zoom.
[1.5 SEC]/[0.5 SEC]	Pictures are displayed for the selected time or until the shutter button is pressed halfway.
[OFF]	Pictures are not displayed after shooting.

[AUTOROTATE DISPLAYS]

Choose whether the indicators in the viewfinder and LCD monitor rotate to match camera orientation.

Options
[ON]	[OFF]

[PREVIEW EXP./WB IN MANUAL MODE]

Choose whether to enable exposure and/or white balance preview in manual exposure mode.

Option	Description
[PREVIEW EXP./WB]	Enable exposure and white balance preview.
[PREVIEW WB]	Preview white balance only. Choose this option in situations in which exposure and white balance are likely to change during shooting, as may be the case when you use a flash with an incandescent monitoring lamp.
[OFF]	Disable exposure and white balance preview. Choose this option when using a flash or on other occasions on which exposure may change when the picture is taken.

[NATURAL LIVE VIEW]

Choose whether the effects of film simulation, white balance, and other settings are visible in the monitor.

Option	Description
[ON]	The effects of camera settings are not visible in the monitor, but shadows in low-contrast, back-lit scenes and other hard-to-see subjects more visible. Colors and tone will differ from those in the final picture. The display will however be adjusted to show the effects of monochrome and sepia settings.
[OFF]	The effects of film simulation, white balance, and other settings can be previewed in the monitor.

[F-Log VIEW ASSIST]

Select [ON] to display a tone-corrected preview (equivalent to BT.709) when recording or viewing F-log movies.

Options
[ON]	[OFF]

[FRAMING GUIDELINE]

Choose a framing grid for shooting mode.

	Option
	F [GRID 9]	G [GRID 24]	H [HD FRAMING]
Display
	For “rule of thirds” composition.	A six-by-four grid.	Frame HD pictures in the crop shown by the lines at the top and bottom of the display.

[AUTOROTATE PB]

Choose [ON] to automatically rotate “tall” (portrait-orientation) pictures during playback.

Options
[ON]	[OFF]

[FOCUS SCALE UNITS]

Choose the units used for the focus distance indicator.

Options
[METERS]	[FEET]

[APERTURE UNIT FOR CINEMA LENS]

Choose whether the camera displays aperture as a T-number (used for movie camera lenses) or an f/-number (used for still camera lenses) when an optional FUJINON MKX-series lens is attached. For information on using cinema lenses, see the documentation provided with the lens.

Option	Description
[T NUMBER]	A measure of lens aperture commonly used by cinematographers. Lens transmittance is taken into account to better calculate exposure.
[F NUMBER]	A measure of lens aperture commonly used by photographers. Lens transmittance is assumed to be 100%, meaning that the same aperture may produce different exposures depending on the lens.

[DISP. CUSTOM SETTING]

Choose the items shown in the standard indicator display (aCustomizing the Standard Display).

[LARGE INDICATORS MODE(EVF)]

Select [ON] to display large indicators in the electronic viewfinder. The indicators displayed can be selected using D[SCREEN SET-UP] > [LARGE INDICATORS DISP. SETTING].

[LARGE INDICATORS MODE(LCD)]

Select [ON] to display large indicators in the LCD monitor. The indicators displayed can be selected using D[SCREEN SET-UP] > [LARGE INDICATORS DISP. SETTING].

[LARGE INDICATORS DISP. SETTING]

Option	Description
A[Expo. DISP.]	Choose the items listed at the bottom of the display. Selected items are indicated by check marks (R); to deselect, highlight the check marks and press [MENU/OK].
Bd [Scale]	Select [ON] to display the exposure indicator.
C[L1], [L2], [L3], [L4]	Choose up to four large icons for display on the left side of the screen.
D[R1], [R2], [R3], [R4]	Choose up to four large icons for display on the right side of the screen.

[INFORMATION CONTRAST ADJ.]

Adjust display contrast.

Option	Description
[HIGH CONTRAST]	High contrast.
[STANDARD]	Normal contrast.
[LOW CONTRAST]	Low contrast.
[DARK AMBIENT LIGHTING]	Contrast adjusted for dim ambient lighting.

[LOCATION INFO]

Select [ON] to display location info downloaded from a smartphone.

Options
[ON]	[OFF]

x[Q MENU BACKGROUND]

Choose the background color used for the quick menu when it is displayed during still photography.

Options
[TRANSPARENT]	[BLACK]

F[Q MENU BACKGROUND]

Choose the background color used for the quick menu when it is displayed during movie recording.

Options
[TRANSPARENT]	[BLACK]