• The Setup Menus
• The Setup Menus ([SCREEN SETTING])

Enter a search term and click .

Make changes to display settings.

---

[EYE SENSOR SETTING]

Turn the eye sensor on or off. Separate options are available for shooting and playback.

Option	Description
[SHOOTING]	[ON]: Putting your eye to the EVF turns the EVF on. The LCD monitor turns off. [OFF]: The EVF turns on when the monitor panel is closed and off when the panel is open.
[PLAYBACK]

[BRIGHT FRAME POSITION MEMORY]

Option	Description
[ON]	The bright frame stays in the new position when the shutter button is released.
[OFF]	The bright frame returns to its normal position when the shutter button is released.

[EVF BRIGHTNESS]

Adjust the brightness of the display in the electronic viewfinder.

Option	Description
[AUTO]	Automatic brightness adjustment.
[MANUAL]	Adjust brightness manually; choose from options between +5 and −7.

[EVF COLOR]

Adjust the hue of the display in the electronic viewfinder.

EVF COLOR ADJUSTMENT

Adjust the color of the display in the electronic viewfinder.

1. Adjust colors using the focus stick (focus lever).

   

2. Press [MENU]/[OK].

[LCD BRIGHTNESS]

Adjust monitor brightness.

[LCD COLOR]

Adjust monitor hue.

[LCD COLOR ADJUSTMENT]

Adjust the color of the display in the LCD monitor.

1. Adjust colors using the focus stick (focus lever).

2. Press [MENU]/[OK].

[IMAGE DISP.]

Choose how long images are displayed after shooting.

Option	Description
[CONTINUOUS]	Pictures are displayed until the [MENU]/[OK] button is pressed or the shutter button is pressed halfway. To zoom in on the active focus point, press the center of the rear command dial; press again to cancel zoom.
[1.5 SEC]	Pictures are displayed for the selected time or until the shutter button is pressed halfway.
[0.5 SEC]
[OFF]	Pictures are not displayed after shooting.

[AUTOROTATE DISPLAYS]

Choose whether the indicators in the viewfinder and LCD monitor rotate to match camera orientation.

Options
[ON]	[OFF]

[PREVIEW EXP./WB IN MANUAL MODE]

Choose whether to enable exposure and/or white balance preview in manual exposure mode.

Option	Description
[PREVIEW EXP./WB]	Enable exposure and white balance preview.
[PREVIEW WB]	Preview white balance only. Choose this option in situations in which exposure and white balance are likely to change during shooting, as may be the case when you use a flash with an incandescent monitoring lamp.
[OFF]	Disable exposure and white balance preview. Choose this option when using a flash or on other occasions on which exposure may change when the picture is taken.

[NATURAL LIVE VIEW]

Choose whether the effects of film simulation, white balance, and other settings are visible in the monitor.

Option	Description
[ON]	The effects of camera settings are not visible in the monitor, but shadows in low-contrast, back-lit scenes and other hard-to-see subjects more visible. Colors and tone will differ from those in the final picture. The display will however be adjusted to show the effects of monochrome and sepia settings.
[OFF]	The effects of film simulation, white balance, and other settings can be previewed in the monitor.

[FRAMING GUIDELINE]

Choose a framing grid for shooting mode.

	Option
	F[GRID 9]	G[GRID 24]	H[HD FRAMING]
Display
	For “rule of thirds” composition.	A six-by-four grid.	Frame HD pictures in the crop shown by the lines at the top and bottom of the display.

[AUTOROTATE PB]

Choose [ON] to automatically rotate “tall” (portrait-orientation) pictures during playback.

Options
[ON]	[OFF]

[FOCUS SCALE UNITS]

Choose the units used for the focus distance indicator.

Options
[METERS]	[FEET]

[APERTURE UNIT FOR CINEMA LENS]

Choose whether the camera displays aperture as a T-number (used for movie camera lenses) or an f/-number (used for still camera lenses) when an optional FUJINON MKX-series lens is attached. For information on using cinema lenses, see the documentation provided with the lens.

Option	Description
[T NUMBER]	A measure of lens aperture commonly used by cinematographers. Lens transmittance is taken into account to better calculate exposure.
[F NUMBER]	A measure of lens aperture commonly used by photographers. Lens transmittance is assumed to be 100%, meaning that the same aperture may produce different exposures depending on the lens.

[OVF, IMAGE DISP.]

Choose how the camera displays pictures after shooting when the OVF is used. Pictures are displayed only for the length of time selected for D [SCREEN SET-UP] > [IMAGE DISP.].

Option	Description
[FULL SCREEN]	The pictures fill the viewfinder.
[SMALL WINDOW]	The pictures are displayed in the electronic rangefinder (ERF).

[DISP. CUSTOM SETTING]

Choose the items shown in the standard indicator display.

1. In shooting mode, use the [DISP/BACK] button to display standard indicators.

2. Press [MENU]/[OK] and select D[SCREEN SET-UP] > [DISP. CUSTOM SETTING] in the D ([SET UP]) tab.

3. Choose [OVF] or [EVF/LCD].

4. Highlight items and press [MENU]/[OK] to select or deselect.

5. Press [DISP]/[BACK] to save changes.

6. Press [DISP]/[BACK] as needed to exit the menus and return to the shooting display.

Available Items

Item	Default
	OVF	EVF/LCD
[FRAMING GUIDELINE]	R	R
[ELECTRONIC LEVEL]	R	R
[FOCUS FRAME]	R	R
[AF DISTANCE INDICATOR]	R	R
[MF DISTANCE INDICATOR]	R	R
[HISTOGRAM]	R	R
[LIVE VIEW HIGHLIGHT ALERT]	—	R
[SHOOTING MODE]	R	R
[APERTURE/S-SPEED/ISO]	R	R
[INFORMATION BACKGROUND]	—	R
[Expo. Comp. (Digit)]	R	R
[Expo. Comp. (Scale)]	R	R
[FOCUS MODE]	R	R
[PHOTOMETRY]	R	R
[SHUTTER TYPE]	R	R
[FLASH]	R	R
[CONTINUOUS MODE]	R	R
[DUAL IS MODE]	R	R
[TOUCH SCREEN MODE]	—	R
[WHITE BALANCE]	R	R
[FILM SIMULATION]	R	R
[DYNAMIC RANGE]	R	R
[BOOST MODE]	R	R
[FRAMES REMAINING]	R	R
[IMAGE SIZE/QUALITY]	—	R
[MOVIE MODE & REC. TIME]	—	R
[IMAGE TRANSFER ORDER]	R	R
[MIC LEVEL]	—	R
[GUIDANCE MESSAGE]	R	R
[BATTERY LEVEL]	R	R
[FRAMING OUTLINE]	—	R

[LARGE INDICATORS MODE(EVF/OVF)]

Select [ON] to display large indicators in the optical or electronic viewfinder. The indicators displayed can be selected using D [SCREEN SET-UP] > [LARGE INDICATORS DISP. SETTING].

[OFF]	[ON]

[LARGE INDICATORS MODE(LCD)]

Select [ON] to display large indicators in the LCD monitor. The indicators displayed can be selected using D[SCREEN SET-UP] > [LARGE INDICATORS DISP. SETTING].

[OFF]	[ON]

[LARGE INDICATORS DISP. SETTING]

Option	Description
A[Expo. DISP.]	Choose the items listed at the bottom of the display. Selected items are indicated by check marks (R); to deselect, highlight the check marks and press [MENU]/[OK].
Bd[Scale]	Select [ON] to display the exposure indicator.
C[L1], [L2], [L3], [L4]	Choose up to four large icons for display on the left side of the screen.
D[R1], [R2], [R3], [R4]	Choose up to four large icons for display on the right side of the screen.

[INFORMATION CONTRAST ADJ.]

Adjust display contrast.

Option	Description
[HIGH CONTRAST]	High contrast.
[STANDARD]	Normal contrast.
[LOW CONTRAST]	Low contrast.
[DARK AMBIENT LIGHTING]	Contrast adjusted for dim ambient lighting.

[LOCATION INFO]

Select [ON] to display location info downloaded from a smartphone.

Options
[ON]	[OFF]

[SUB MONITOR]

Adjust display settings for the sub monitor. Separate displays are available for still photography and movie recording. Choose from the following:

Option	Description
[CLASSIC]	Display the settings chosen for film simulation, white balance, and ISO sensitivity.
[STANDARD]	Display camera settings. You can choose the settings displayed.

Choosing the Items Displayed in [STANDARD] Mode

Follow the steps below to choose the indicators shown in the [STANDARD] display.

1. Select D [SCREEN SET-UP] > [SUB MONITOR] in the setup menu.

2. Highlight [STANDARD] and press [MENU]/[OK].

3. Highlight [STILL MODE] or [MOVIE MODE] and press [MENU]/[OK].

4. Highlight the indicator you wish to change and press [MENU]/[OK].

   

5. Highlight the indicator you wish to display and press [MENU]/[OK].

   

   Choose from:

   • [SHUTTER SPEED]
   • [APERTURE]
   • [EXPO. COMP.]
   • [ISO]
   • [MOVIE MODE]
   • [FRAMES REM.]
   • [REC. TIME]
   • [SHOOTING MODE]
   • [PHOTOMETRY]
   • [DRIVE MODE]

   • [FOCUS MODE]
   • [WHITE BALANCE]
   • [IMAGE SIZE]
   • [IMAGE QUALITY]
   • [BATTERY LEVEL]
   • [CARD SLOT OPTIONS]
   • [SHUTTER TYPE]
   • [FILM SIMULATION]
   • [DYNAMIC RANGE]
   • [NONE]

6. Repeat Steps 4 and 5 to change additional indicators.