This website uses cookies. By using the site you are agreeing to our Privacy Policy.

Enter a search term and click .

F Recording Movies

This section describes how to film movies in auto mode.

  1. Press the DRIVE button and select F(MOVIE) from the list of drive mode options.

  2. Press the shutter button to start recording. A recording indicator (V) and the time remaining are displayed while recording is in progress.

  3. Press the button again to end recording. Recording ends automatically when the maximum length is reached or the memory card is full.

Use a memory card with a UHS speed class of 3 or better when recording movies.

Touch zoom is not available during movie recording.

The area recorded when ON is selected for WDIGITAL IMAGE STABILIZER is smaller than that shown in the monitor.

Sound is recorded via the built-in microphone or an optional external microphone. Do not cover the microphone during recording. Note that the microphone may pick up lens noise and other sounds made by the camera during recording.

Vertical or horizontal streaks may appear in movies containing very bright subjects. This is normal and does not indicate a malfunction.

The indicator lamp lights while recording is in progress.

Exposure compensation can be adjusted by up to ±2 EV during movie recording.

Recording may be unavailable at some settings, while in other cases settings may not apply during recording.

External microphones can be used (a Using an External Microphone).

Adjusting Movie Settings

Adjust movie settings in the WMOVIE SET-UP menu.

The movie type, frame size, and frame rate can be selected using WMOVIE SET-UP > MOVIE MODE.

The AF-area mode for movie recording is selected using WMOVIE SET-UP > AF MODE; choose from MULTI and AREA.

Focus mode is selected using WMOVIE SET-UP > FOCUS MODE; for continuous focus adjustment, select CONTINUOUS AF or choose SINGLE AF and enable Intelligent Face Detection. Intelligent Face Detection is not available in manual focus mode.

Depth of Field

Manual aperture adjustment is available in shooting modes A and M; adjust aperture before recording begins. Choose low f-numbers to soften background details. The effect can be heightened by increasing the distance between your subject and the background.