Enter a search term and click .

Inserting the Battery and a Memory Card

Insert the battery and memory card as described below.

  1. Open the battery-chamber cover.

    Slide the battery-chamber cover latch as shown and open the battery-chamber cover.

    Do not open the battery-chamber cover when the camera is on. Failure to observe this precaution could damage image files or memory cards.

    Do not use excessive force when handling the battery-chamber cover.

  2. Insert the battery as shown.

    Insert the battery in the orientation shown. Do not use force or attempt to insert the battery upside down or backwards.

    Confirm that the battery is securely latched.

  3. Insert the memory card.

  4. Close the battery-chamber cover and slide the battery-chamber latch closed.

    If the cover does not close, check that the battery is in the correct orientation. Do not attempt to force the cover shut.

Removing the Battery

Before removing the battery, turn the camera off and open the battery-chamber cover.

To remove the battery, press the battery latch to the side, and slide the battery out of the camera as shown.

The battery may become hot when used in high-temperature environments. Observe caution when removing the battery.

Removing Memory Cards

To remove the memory card, press it in and release it slowly. The card can then be removed by hand.

Press the center of the card.

Suddenly removing your finger from the card could cause the card to fall from the slot. Remove your finger slowly.

If the camera displays a p icon, the memory card may be hot to the touch. Wait for the card to cool before removing it.

Compatible Memory Cards

  • The camera can be used with SD, SDHC, and SDXC memory cards. Both the UHS-I and UHS-II bus interfaces are supported.
  • UHS-II cards are recommended for high-speed burst photography.
  • The types of memory cards suitable for movie recording vary with the settings selected (aAdjusting Movie Settings).

  • A list of supported memory cards is available on the Fujifilm website. For details, visit: “COMPATIBILITY (cameras)”.

Do not turn the camera off or remove the memory card while the memory card is being formatted or data are being recorded to or deleted from the card. Failure to observe this precaution could damage the card.

Memory cards can be locked, making it impossible to format the card or to record or delete images. Before inserting a memory card, slide the write-protect switch to the unlocked position.

Memory cards are small and can be swallowed; keep out of reach of children. If a child swallows a memory card, seek medical assistance immediately.

miniSD or microSD adapters that are larger or smaller than memory cards may not eject normally; if the card does not eject, take the camera to an authorized service representative. Do not forcibly remove the card.

Do not affix labels or other objects to memory cards. Peeling labels can cause camera malfunction.

Movie recording may be interrupted with some types of memory card.

Formatting a memory card in the camera creates a folder in which pictures are stored when a picture is taken for the first time. Do not rename or delete this folder or use a computer or other device to edit, delete, or rename image files. Always use the camera to delete pictures; before editing or renaming files, copy them to a computer and edit or rename the copies, not the originals. Renaming the files on the camera can cause problems during playback.