Adjust playback settings.
The playback menu is displayed when you press MENU/OK in playback mode.
Use the front command dial to scroll through the menus a page at a time.
Choose the card from which images will be played back.
If two memory cards are inserted, you can press and hold the button to choose a card for playback.
RAW pictures store information on camera settings separately from the data captured by the camera image sensor. Using PLAY BACK MENU > RAW CONVERSION, you can create JPEG copies of RAW pictures using different options for the settings listed on “Setting”. The original image data are unaffected, allowing a single RAW image to be processed in a multitude of different ways.
With a RAW picture displayed, press MENU/OK to display the playback menu.
Press the selector up or down to highlight PLAY BACK MENU > RAW CONVERSION and press MENU/OK to display settings.
These options can also be displayed by pressing the Q button during playback.
Press the selector up or down to highlight a setting and press the selector right to display options. Press the selector up or down to highlight the desired option and press MENU/OK to select and return to the settings list. Repeat this step to adjust additional settings.
Press the Q button to preview the JPEG copy and press MENU/OK to save.
The settings that can be adjusted when converting pictures from RAW to JPEG are:
Setting | Description |
---|---|
REFLECT SHOOTING COND. | Create a JPEG copy using the settings in effect at the time the photo was taken. |
PUSH/PULL PROCESSING | Adjust exposure. |
DYNAMIC RANGE | Enhance details in highlights for natural contrast. |
FILM SIMULATION | Simulate the effects of different types of film. |
GRAIN EFFECT | Add a film grain effect. |
WHITE BALANCE | Adjust white balance. |
WB SHIFT | Fine-tune white balance. |
HIGHLIGHT TONE | Adjust highlights. |
SHADOW TONE | Adjust shadows. |
COLOR | Adjust color density. |
SHARPNESS | Sharpen or soften outlines. |
NOISE REDUCTION | Process the copy to reduce mottling. |
LENS MODULATION OPTIMIZER | Improve definition by adjusting for diffraction and the slight loss of focus at the periphery of the lens. |
COLOR SPACE | Choose the color space used for color reproduction. |
Delete individual pictures, multiple selected pictures, or all pictures.
Deleted pictures can not be recovered. Protect important pictures or copy them to a computer or other storage device before proceeding.
Option | Description |
---|---|
FRAME | Delete pictures one at a time. |
SELECTED FRAMES | Delete multiple selected pictures. |
ALL FRAMES | Delete all unprotected pictures. |
Select FRAME for ERASE in the playback menu.
Press the selector left or right to scroll through pictures and press MENU/OK to delete (a confirmation dialog is not displayed). Repeat to delete additional pictures.
Select SELECTED FRAMES for ERASE in the playback menu.
Highlight pictures and press MENU/OK to select or deselect (pictures in photobooks or printer orders are shown by ). Selected pictures are indicated by check marks ().
When the operation is complete, press DISP/BACK to display a confirmation dialog.
Highlight OK and press MENU/OK to delete the selected pictures.
Select ALL FRAMES for ERASE in the playback menu.
A confirmation dialog will be displayed; highlight OK and press MENU/OK to delete all unprotected pictures.
Pressing DISP/BACK cancels deletion; note that any pictures deleted before the button was pressed can not be recovered.
If a message appears stating that the selected images are part of a DPOF print order, press MENU/OK to delete the pictures.
Create a cropped copy of the current picture.
Display the desired picture.
Select CROP in the playback menu.
Use the rear command dial to zoom in and out and press the selector up, down, left, or right to scroll the picture until the desired portion is displayed.
Press MENU/OK to display a confirmation dialog.
Press MENU/OK again to save the cropped copy to a separate file.
Larger crops produce larger copies; all copies have an aspect ratio of 3:2. If the size of the final copy will be , YES will be displayed in yellow.
Create a small copy of the current picture.
Display the desired picture.
Select RESIZE in the playback menu.
Highlight a size and press MENU/OK to display a confirmation dialog.
Press MENU/OK again to save the resized copy to a separate file.
The sizes available vary with the size of the original image.
Protect pictures from accidental deletion. Highlight one of the following options and press MENU/OK.
Protected pictures will be deleted when the memory card is formatted.
Rotate pictures.
Display the desired picture.
Select IMAGE ROTATE in the playback menu.
Press the selector down to rotate the picture 90° clockwise, up to rotate it 90° counterclockwise.
Press MENU/OK. The picture will automatically be displayed in the selected orientation whenever it is played back on the camera.
Protected pictures can not be rotated. Remove protection before rotating pictures.
The camera may not be able to rotate pictures created with other devices. Pictures rotated on the camera will not be rotated when viewed on a computer or on other cameras.
Pictures taken with SCREEN SETTING > AUTOROTATE PB are automatically displayed in the correct orientation during playback.
Remove red-eye from portraits. The camera will analyze the image; if red-eye is detected, the image will be processed to create a copy with reduced red-eye.
Display the desired picture.
Select RED EYE REMOVAL in the playback menu.
Press MENU/OK.
Results vary depending on the scene and the camera’s success in detecting faces. Red eye can not be removed from pictures that have already been processed using red-eye removal, which are indicated by a icon during playback.
The amount of time needed to process the image varies with the number of faces detected.
Red eye removal can not be performed on RAW images.
Add a voice memo to the current photograph.
Select ON for VOICE MEMO SETTING in the playback menu.
Display a photo to which you wish to add a voice memo.
Press and hold the center of the front command dial to record the memo. Recording ends after 30 s or when you release the dial.
The new memo will be recorded over any existing memos. Deleting the picture also deletes the memo.
Voice memos can not be added to movies or protected pictures.
Playing Voice Memos
Pictures with voice memos are indicated by icons during playback. To play a memo, select the picture and press the center of the front command dial; a progress bar will be displayed while the memo plays back. Volume can be adjusted by pressing MENU/OK to pause playback and then pressing the selector up or down to adjust the volume. Press MENU/OK again to resume playback. Volume can also be adjusted usingSOUND SETTING > PLAYBACK VOLUME.
Copy pictures between the cards in the first and second slots.
Select COPY in the playback menu.
Highlight one of the following options and press the selector right:
Highlight one of the following options and press MENU/OK:
Copying ends when the destination is full.
Connect to smartphones running the “FUJIFILM Camera Remote” app. The smartphone can be used to browse the images on the camera, download selected images, control the camera remotely, or upload location data to the camera.
For downloads and other information, visit:
View pictures in an automated slide show. Press MENU/OK to start and press the selector right or left to skip ahead or back. Press DISP/BACK at any time during the show to view on-screen help. The show can be ended at any time by pressing MENU/OK.
The camera will not turn off automatically while a slide show is in progress.
Create books from your favorite photos.
Select NEW BOOK for PLAY BACK MENU > PHOTOBOOK ASSIST.
Scroll through the images and press the selector up to select or deselect. Press MENU/OK to exit when the book is complete.
Neither photographs or smaller nor movies can be selected for photobooks.
The first picture selected becomes the cover image. Press the selector down to select the current image for the cover instead.
Highlight COMPLETE PHOTOBOOK and press MENU/OK (to select all photos for the book, choose SELECT ALL). The new book will be added to the list in the photobook assist menu.
Books can contain up to 300 pictures. Books that contain no photos are automatically deleted.
Photobooks
Photobooks can be copied to a computer using MyFinePix Studio software.
Highlight a book in the photobook assist menu and press MENU/OK to display the book, then press the selector left or right to scroll through the pictures.
Display the photobook and press MENU/OK. The following options will be displayed; select the desired option and follow the on-screen instructions.
Upload pictures from the camera to a computer running the “FUJIFILM PC AutoSave” application (note that you must first install the software and configure the computer as a destination for images copied from the camera).
For downloads and other information, visit:
Create a digital “print order” for DPOF-compatible printers.
Select PLAY BACK MENU > PRINT ORDER (DPOF).
Select WITH DATE to print the date of recording on pictures, WITHOUT DATE to print pictures without dates, or RESET ALL to remove all pictures from the print order before proceeding.
Display a picture you wish to include in or remove from the print order.
Press the selector up or down to choose the number of copies (up to 99). To remove a picture from the order, press the selector down until the number of copies is 0.
Repeat steps 3–4 to complete the print order.
The total number of prints is displayed in the monitor. Press MENU/OK to exit.
The pictures in the current print order are indicated by a icon during playback.
Print orders can contain a maximum of 999 pictures.
If a memory card is inserted containing a print order created by another camera, a message will be displayed. Pressing MENU/OK cancels the print order; a new print order must be created as described above.
To print pictures to optional FUJIFILM instax SHARE printers, first select CONNECTION SETTING > instax PRINTER CONNECTION SETTING and enter the instax SHARE printer name (SSID) and password, then follow the steps below.
Turn the printer on.
Select PLAY BACK MENU > instax PRINTER PRINT. The camera will connect to the printer.
To print a frame from a burst sequence, display the frame before selecting instax PRINTER PRINT.
Use the selector to display the picture you want to print, then press MENU/OK. The picture will be sent to the printer and printing will start.
Pictures taken with other cameras can not be printed.
The area printed is smaller than the area visible in the LCD monitor.
Choose how High Definition (HD) devices display pictures with an aspect ratio of 3:2 (this option is available only when an HDMI cable is connected). Select 16:9 to display the image so that it fills the screen with its top and bottom cropped out, 3:2 to display the entire image with black bands at either side.
Option | ||
---|---|---|
16:9 | 3:2 | |
Display |