.Basic Setup
When you turn the camera on for the first time, you can choose a language and set the camera clock. Follow the steps below when turning the camera on for the first time.
-
Turn the camera on.
A language-selection dialog will be displayed.
-
Choose a language.
Highlight a language and press MENU/OK.
-
Choose a time zone.
When prompted, choose a time zone and turn daylight savings time on or off using the focus stick (focus lever), then highlight SET and press MENU/OK.
To skip this step, press DISP/BACK.
-
Set the clock.
Press MENU/OK to proceed to the next step.
-
View information on the smartphone app.
- The camera will display a QR code you can scan with your smartphone to open a website where you can download the smartphone app.
- Press MENU/OK to proceed to the next step.
Use the smartphone app to download pictures from the camera or control the camera remotely (aConnecting to Smartphones (Bluetooth)).
-
Choose an AUTO POWER OFF TEMP.
- The selected setting determines the temperature at which the camera will turn off automatically.
- Press MENU/OK to exit to the shooting display.
-
Format the memory card (aFORMAT).
Format memory cards before first use, and be sure to reformat all memory cards after using them in a computer or other device.
If the battery is removed for an extended period, the camera clock will be reset and the language-selection dialog will be displayed when the camera is turned on.
Choosing a Different Language
To change the language:
-
Display language options.
Select DUSER SETTING > Qa.
-
Choose a language.
Highlight the desired option and press MENU/OK.
Changing the Time and Date
To set the camera clock:
-
Display DATE/TIME options.
Select DUSER SETTING > DATE/TIME.
-
Set the clock.
Press the focus stick (focus lever) left or right to highlight the year, month, day, hour, or minute and press up or down to change. Press MENU/OK to set the clock.
