The optional EVF‑TL1 tilt adapter lets you swivel the viewfinder left or right ±45° or up or down between 0° and 90°.
Hot shoe
Tilt lock knob
Adapter lock release
Horizontal swivel lock
Connectors
Connector cover
Hot shoe cover
Slide the EVF-TL1 onto the camera hot shoe and then attach the EVF-GFX1 electronic viewfinder.
Remove the hot shoe covers from the camera and EVF-TL1 before attaching the adapter and viewfinder.
Removing the EVF-TL1
Remove the viewfinder and then, keeping the lock releases () pressed, press down on the front of the adapter (
) and slide it from the camera as shown.
Use only one tilt adapter at a time.
Swivel the viewfinder into the desired position.
Loosen the tilt lock knob and swivel the viewfinder up or down from 0° to 90°.
With the viewfinder in the desired position (), tighten the tilt lock knob (
) to lock the viewfinder in place.
Release the horizontal swivel lock as shown and swivel the viewfinder left or right ±45°.
With the viewfinder in the desired position (), return the horizontal swivel lock to the latched position (
) to lock the viewfinder in place.