.IMAGE QUALITY SETTING (Movie Recording)
Adjust image quality settings for movies.
To display image quality settings, press MENU/OK in the movie shooting display and select the H (IMAGE QUALITY SETTING) tab.
The options available vary with the shooting mode selected.
FFILM SIMULATION
Options are the same as those for still photography, but settings must be adjusted separately (aFILM SIMULATION (Still Photography)).
FMONOCHROMATIC COLOR
Options are the same as those for still photography, but settings must be adjusted separately (aMONOCHROMATIC COLOR (Still Photography)).
FWHITE BALANCE
Options are the same as those for still photography, but settings must be adjusted separately (aWHITE BALANCE (Still Photography)).
FTONE CURVE
Options are the same as those for still photography, but settings must be adjusted separately (aTONE CURVE (Still Photography)).
FCOLOR
Options are the same as those for still photography, but settings must be adjusted separately (aCOLOR (Still Photography)).
FSHARPNESS
Options are the same as those for still photography, but settings must be adjusted separately (aSHARPNESS (Still Photography)).
FHIGH ISO NR
Options are the same as those for still photography, but settings must be adjusted separately (aHIGH ISO NR (Still Photography)).
FPERIPHERAL LIGHT CORRECTION
Select ON to enable peripheral illumination correction during movie recording.
| Options | |
|---|---|
| ON | OFF |
If ON is selected when a lens that does not transmit data to the camera is attached, peripheral illumination will be adjusted according to the option selected for HIMAGE QUALITY SETTING > xFMOUNT ADAPTER SETTING > PERIPHERAL ILLUMINATION CORRECTION in the shooting menu (aPeripheral Illumination Correction).
Select OFF if you notice banding in movies recorded using this option.
xFMOUNT ADAPTOR SETTING
This item is also found in the photo menus (axFMOUNT ADAPTOR SETTING (Still Photography)). Changes to one apply to the other.
