• Playback and the Playback Menu
• The Playback Menu

Enter a search term and click .

Adjust playback settings.

---

---

SWITCH SLOT

Choose the card or SSD from which images will be played back.

RAW CONVERSION

Even if you don't have a computer, you can use the camera to modify RAW pictures and save them in other formats.

Saving RAW Pictures in Another Format

1. Display a RAW picture.

2. Highlight RAW CONVERSION in the playback menu.

3. Press MENU/OK.

   A list of settings will be displayed.

   

4. Press the focus stick (focus lever) up or down to highlight a setting.

5. Press the focus stick right to display options.

   

6. Press the focus stick up or down to highlight the desired option.

7. Press MENU/OK to select the highlighted option.

   The settings list shown in Step 3 will be displayed. Repeat Steps 4 to 7 to adjust additional settings.

8. Press the Q button.

   A preview of the copy will be displayed.

9. Press MENU/OK.

   The copy will be saved.

The settings that can be adjusted when converting pictures from RAW to another format are:

Setting	Description
REFLECT SHOOTING COND.	Create a copy using the settings in effect at the time the photo was taken.
FILE TYPE	Choose a file format.
IMAGE SIZE	Choose an image size.
IMAGE QUALITY	Adjust image quality.
PUSH/PULL PROCESSING	Adjust exposure.
DYNAMIC RANGE	Enhance details in highlights for natural contrast.
D RANGE PRIORITY	Reduce loss of detail in highlights and shadows for natural-looking results when photographing high-contrast scenes.
FILM SIMULATION	Simulate the effects of different types of film.
MONOCHROMATIC COLOR	Choose a monochrome tint for photographs taken using FILM SIMULATION > aACROS and bMONOCHROME.
GRAIN EFFECT	Add a film grain effect.
COLOR CHROME EFFECT	Increase the range of tones available for rendering colors that tend to be highly saturated, such as reds, yellows, and greens.
COLOR CHROME FX BLUE	Increase the range of tones available for rendering blues.
SMOOTH SKIN EFFECT	Smooth complexions.
WHITE BALANCE	Adjust white balance.
WB SHIFT	Fine-tune white balance.
TONE CURVE	Adjust highlights and shadows.
COLOR	Adjust color density.
SHARPNESS	Sharpen or soften outlines.
HIGH ISO NR	Process the copy to reduce mottling.
CLARITY	Increase definition.
LENS MODULATION OPTIMIZER	Improve definition by adjusting for diffraction and the slight loss of focus at the periphery of the lens.
COLOR SPACE	Choose the color space used for color reproduction.

HEIF TO JPEG/TIFF CONVERSION

Convert HEIF pictures to JPEG or TIFF.

SELECT IMAGES

Select HEIF pictures for conversion.

FILE FORMAT

Choose a format for the converted pictures.

Options
JPEG	TIFF 8bit	TIFF 16bit

SELECT SLOT TO RECORD

Choose the destination to which the converted pictures will be saved.

Options
SSD	SLOT 1	SLOT 2

ERASE

Delete individual pictures, multiple selected pictures, or all pictures.

Option	Description
FRAME	Delete pictures one at a time.
SELECTED FRAMES	Delete multiple selected pictures.
ALL FRAMES	Delete all unprotected pictures.

FRAME

1. Select FRAME for ERASE in the playback menu.

2. Press the focus stick (focus lever) left or right to scroll through pictures and press MENU/OK to delete.

SELECTED FRAMES

1. Select SELECTED FRAMES for ERASE in the playback menu.

2. Highlight pictures and press MENU/OK to select.

   • Selected pictures are indicated by check marks (R).
   • To deselect a highlighted picture, press MENU/OK again.

3. When the operation is complete, press DISP/BACK to display a confirmation dialog.

4. Highlight OK and press MENU/OK to delete the selected pictures.

ALL FRAMES

1. Select ALL FRAMES for ERASE in the playback menu.

2. A confirmation dialog will be displayed; highlight OK and press MENU/OK to delete all unprotected pictures.

SIMULTANEOUS DELETE

Taking photos with SEPARATE selected for DSAVE DATA SET-UP > xCARD SLOT SETTING creates two copies. Choose whether deleting the RAW image will also delete the JPEG or HEIF copy.

Option	Description
ON	Deleting the RAW image from the card in Slot 1 also deletes the JPEG or HEIF copy from the card in Slot 2.
OFF	Deleting the RAW image from the card in Slot 1 does not delete the JPEG or HEIF copy from the card in Slot 2.

CROP

Create a cropped copy of the current picture.

1. Display the desired picture.

2. Select CROP in the playback menu.

3. Use the rear command dial to zoom in and out and press the focus stick (focus lever) up, down, left, or right to scroll the picture until the desired portion is displayed.

4. Press MENU/OK to display a confirmation dialog.

5. Press MENU/OK again to save the cropped copy to a separate file.

RESIZE

Create a small copy of the current picture.

1. Display the desired picture.

2. Select RESIZE in the playback menu.

3. Highlight a size and press MENU/OK to display a confirmation dialog.

4. Press MENU/OK again to save the resized copy to a separate file.

PROTECT

Protect pictures from accidental deletion. Highlight one of the following options and press MENU/OK.

Option	Description
FRAME	Protect selected pictures. Press the focus stick (focus lever) left or right to view pictures and press MENU/OK to select or deselect. Press DISP/BACK when the operation is complete.
SET ALL	Protect all pictures.
RESET ALL	Remove protection from all pictures.

IMAGE ROTATE

Rotate pictures.

1. Select ON for DSCREEN SET-UP > AUTOROTATE PB.

2. Display the desired picture.

3. Select IMAGE ROTATE in the playback menu.

4. Press the focus stick (focus lever) down to rotate the picture 90° clockwise, up to rotate it 90° counterclockwise.

5. Press MENU/OK. The picture will automatically be displayed in the selected orientation whenever it is played back on the camera.

VOICE MEMO SETTING

Add a voice memo to the current photograph.

1. Select ON for VOICE MEMO SETTING in the playback menu.

2. Display a photo to which you wish to add a voice memo.

3. Press and hold the center of the front command dial to record the memo. Recording ends after 30 s or when you release the dial.

RATING

Rate pictures using stars.

1. Select RATING in the playback menu.

2. Rotate the front command dial to choose a picture and the rear command dial to choose a rating of from 0 to 5 stars (“I”).

COPY

Copy pictures between a card in the first slot, a card in the second slot, and an SSD connected to the USB connector.

1. Select COPY in the playback menu.

2. Highlight one of the following options.

   Option	Description
   SSD ySLOT1	Copy pictures from the SSD to the card in the first slot.
   SSD ySLOT2	Copy pictures from the SSD to the card in the second slot.
   SLOT1 ySSD	Copy pictures from the card in the first slot to the SSD.
   SLOT1 ySLOT2	Copy pictures from the card in the first slot to the card in the second slot.
   SLOT2 ySSD	Copy pictures from the card in the second slot to the SSD.
   SLOT2 ySLOT1	Copy pictures from the card in the second slot to the card in the first slot.

3. Press the focus stick (focus lever) right.

4. Highlight one of the following options and press MENU/OK.

   Option	Description
   FRAME	Copy selected pictures. Press the focus stick left or right to view pictures and press MENU/OK to copy the current picture.
   ALL FRAMES	Copy all pictures.

TRANSFER IMAGE TO SMARTPHONE

Select photos for upload to a paired smartphone or tablet via Bluetooth (aConnecting to Smartphones (Bluetooth)).

1. Select TRANSFER IMAGE TO SMARTPHONE > SELECT IMAGE & TRANSFER.

   Select RESET ORDER to remove “upload to smartphone” marking from all pictures before proceeding.

2. Mark pictures for upload.

   Highlight pictures and press MENU/OK to mark them for upload.

   • To switch to the memory card in the other slot or display only pictures that meet selected criteria, press DISP/BACK before marking begins.
   • To select all pictures, press the Q button.
   • Selecting any two pictures with the AEL button also selects all pictures between them.

   

3. Press DISP/BACK and select START TRANSFER.

   The selected pictures will be uploaded.

   

xFWIRELESS COMMUNICATION

Connect to smartphones running the latest apps. The smartphone can then be used to:

• Control the camera and take pictures remotely
• Receive pictures uploaded from the camera
• Browse the pictures on the camera and download selected pictures
• Upload location data to the camera

PHOTOBOOK ASSIST

Create books from your favorite photos.

Creating a Photobook

1. Select NEW BOOK for C PLAY BACK MENU > PHOTOBOOK ASSIST.

2. Scroll through the images and press the focus stick (focus lever) up to select or deselect. Press MENU/OK to exit when the book is complete.

   Neither photographs a or smaller nor movies can be selected for photobooks.

   The first picture selected becomes the cover image. Press the focus stick down to select the current image for the cover instead.

3. Highlight COMPLETE PHOTOBOOK and press MENU/OK (to select all photos for the book, choose SELECT ALL). The new book will be added to the list in the photobook assist menu.

Viewing Photobooks

Highlight a book in the photobook assist menu and press MENU/OK to display the book, then press the focus stick (focus lever) left or right to scroll through the pictures.

Editing and Deleting Photobooks

Display the photobook and press MENU/OK. The following options will be displayed; select the desired option and follow the on-screen instructions.

• EDIT: Edit the book as described in “Creating a Photobook”.
• ERASE: Delete the book.

PRINT ORDER (DPOF)

Create a digital “print order” for DPOF-compatible printers.

1. Select CPLAY BACK MENU > PRINT ORDER (DPOF).

2. Select WITH DATEs to print the date of recording on pictures, WITHOUT DATE to print pictures without dates, or RESET ALL to remove all pictures from the print order before proceeding.

3. Display a picture you wish to include in or remove from the print order.

4. Press the focus stick (focus lever) up or down to choose the number of copies (up to 99).

   Total number of prints

   

   Number of copies

   To remove a picture from the order, press the focus stick down until the number of copies is 0.

   Repeat steps 3–4 to complete the print order.

5. The total number of prints is displayed in the monitor. Press MENU/OK to exit.

instax PRINTER PRINT

To print pictures to optional Fujifilm instax SHARE printers, first select instax PRINTER CONNECTION SETTING in the network/USB settings menu and enter the instax SHARE printer name (SSID) and password, then follow the steps below.

1. Turn the printer on.

2. Select CPLAY BACK MENU > instax PRINTER PRINT. The camera will connect to the printer.

   

3. Use the focus stick (focus lever) to display the picture you want to print, then press MENU/OK. The picture will be sent to the printer and printing will start.

   

   Pictures taken with other cameras cannot be printed.

   The area printed is smaller than the area visible in the LCD monitor.

   The displays may vary depending on the printer connected.

DISP ASPECT

Choose the aspect ratio used for the display of still pictures on High Definition (HD) devices (this option is available only when an HDMI cable is connected).

Options
16:9	4:3