Connecting to the Camera (Bluetooth)

  • iOS
  • Android

Configure the camera and the smartphone or tablet via Bluetooth.

Enable Bluetooth in the iOS Settings app.

  1. Tap the Settings icon in the Home screen.

  2. Tap Bluetooth in the Settings app.

  3. Enable Bluetooth.

  4. Select PAIRING REGISTRATION in the camera menus.

    See the camera manual for more information on menus.

  5. Launch FUJIFILM Camera Remote.

  6. Following the on-screen instructions, choose the type of camera to which you wish to connect.

    This example uses the X-H1.

  7. Tap Proceed setting.

  8. Tap Proceed.

  9. Choose from the list of cameras detected.

  10. Tap START.

    To return to the camera-selection dialog, tap Register a different camera.

  11. The camera and the smartphone (or tablet) will be listed by name and the Bluetooth icon will show that Bluetooth is enabled.

    Once pairing is complete, you can press the camera MENU/OK button to set the camera clock and location to the time and location reported by the smartphone or tablet. See the camera manual for details.

Smartphones and tablets may be unable to connect to the camera if location services are disabled. Enable location services both for the smartphone or tablet as a whole and for the Camera Remote app.

Enable Bluetooth in the Android Settings app.

  1. Tap the app Settings icon.

  2. Tap Bluetooth in the Settings app.

  3. Enable Bluetooth.

  4. Select PAIRING REGISTRATION in the camera menus.

    See the camera manual for more information on menus.

  5. Launch FUJIFILM Camera Remote.

  6. Following the on-screen instructions, choose the type of camera to which you wish to connect.

    This example uses the X-H1.

  7. Tap Add.

  8. Tap Proceed.

  9. Choose from the list of cameras detected.

  10. Tap START.

    To return to the camera-selection dialog, tap Register a different camera.

  11. The camera and the smartphone (or tablet) will be listed by name and the Bluetooth icon will show that Bluetooth is enabled.

    Once pairing is complete, you can press the camera MENU/OK button to set the camera clock and location to the time and location reported by the smartphone or tablet. See the camera manual for details.