Enter a search term and click .

Adjust image quality settings for movies.


To display image quality settings, press [MENU/OK] in the movie shooting display and select the H ([IMAGE QUALITY SETTING]) tab.

The options available vary with the shooting mode selected.

F[FILM SIMULATION DIAL SETTING]

Options are the same as those for still photography, but settings must be adjusted separately (a[FILM SIMULATION DIAL SETTING] (Still Photography)).

F[FILM SIMULATION]

Options are the same as those for still photography, but settings must be adjusted separately (a[FILM SIMULATION] (Still Photography)).

F[MONOCHROMATIC COLOR]

Options are the same as those for still photography, but settings must be adjusted separately (a[MONOCHROMATIC COLOR]).

F[WHITE BALANCE]

Options are the same as those for still photography, but settings must be adjusted separately (a[WHITE BALANCE] (Still Photography)).

F[DYNAMIC RANGE]

Choose a dynamic range for movie recording.

Option Description
V[100%] See “[DYNAMIC RANGE]”.
W[200%]
X[400%]

[AUTO] (automatic dynamic range control) is not available during movie recording.

W[200%] is available at sensitivities of from ISO 250 to ISO 12800, X[400%] at sensitivities of from ISO 500 to 12800.

This item is available when t is selected for B[MOVIE SETTING] > [F-Log/HLG RECORDING].

F[TONE CURVE]

Options are the same as those for still photography, but settings must be adjusted separately (a[TONE CURVE] (Still Photography)).

F[COLOR]

Options are the same as those for still photography, but settings must be adjusted separately (a[COLOR] (Still Photography)).

F[SHARPNESS]

Options are the same as those for still photography, but settings must be adjusted separately (a[SHARPNESS] (Still Photography)).

F[HIGH ISO NR]

Options are the same as those for still photography, but settings must be adjusted separately (a[HIGH ISO NR] (Still Photography)).

[INTERFRAME NR]

Select [AUTO] to automatically adjust interframe noise reduction according to shooting conditions.

Options
[AUTO] [OFF]

“Ghosting” may occur with moving subjects or if the camera is moved during shooting.

F[PERIPHERAL LIGHT CORRECTION]

Select [ON] to enable peripheral illumination correction during movie recording.

Options
[ON] [OFF]

If [ON] is selected when a lens that does not transmit data to the camera is attached, peripheral illumination will be adjusted according to the option selected for H[IMAGE QUALITY SETTING] > xF[MOUNT ADAPTOR SETTING] > [PERIPHERAL ILLUMINATION CORRECTION] in the shooting menu (a[PERIPHERAL ILLUMINATION CORRECTION]).

Select [OFF] if you notice banding in movies recorded using this option.

xF[MOUNT ADAPTOR SETTING]

This item is also found in the photo menus (axF[MOUNT ADAPTOR SETTING] (Still Photography)). Changes to one apply to the other.