• Playback and the Playback Menu
• The Playback Menu

Enter a search term and click .

Adjust playback settings.

---

[RAW CONVERSION]

Even if you don’t have a computer, you can use the camera to modify RAW pictures and save them in JPEG format.

Saving RAW Pictures in JPEG Format

1. Display a RAW picture.

2. Highlight [RAW CONVERSION] in the playback menu.

3. Press [MENU]/[OK].

   A list of settings will be displayed.

   

4. Press the focus stick (focus lever) up or down to highlight a setting.

5. Press the focus stick right to display options.

   

6. Press the focus stick up or down to highlight the desired option.

7. Press [MENU]/[OK] to select the highlighted option. The settings list shown in Step 3 will be displayed. Repeat Steps 4 to 7 to adjust additional settings.

8. Press the [Q] button.

   A preview of the JPEG copy will be displayed.

9. Press [MENU]/[OK].

   The JPEG copy will be saved.

The settings that can be adjusted when converting pictures from RAW to JPEG are:

Setting	Description
[REFLECT SHOOTING COND.]	Create a JPEG copy using the settings in effect at the time the photo was taken.
[IMAGE SIZE]	Choose an image size.
[IMAGE QUALITY]	Adjust image quality.
[PUSH/PULL PROCESSING]	Adjust exposure.
[DYNAMIC RANGE]	Enhance details in highlights for natural contrast.
[D RANGE PRIORITY]	Reduce loss of detail in highlights and shadows for natural-looking results when photographing high-contrast scenes.
[FILM SIMULATION]	Simulate the effects of different types of film.
[B & W ADJ.ab (Warm/Cool)]	Add a warm or cool cast to monochrome pictures.
[GRAIN EFFECT]	Add a film grain effect.
[COLOR CHROME EFFECT]	Deepen colors in shadows.
[WHITE BALANCE]	Adjust white balance.
[WB SHIFT]	Fine-tune white balance.
[HIGHLIGHT TONE]	Adjust highlights.
[SHADOW TONE]	Adjust shadows.
[COLOR]	Adjust color density.
[SHARPNESS]	Sharpen or soften outlines.
[NOISE REDUCTION]	Process the copy to reduce mottling.
[LENS MODULATION OPTIMIZER]	Improve definition by adjusting for diffraction and the slight loss of focus at the periphery of the lens.
[COLOR SPACE]	Choose the color space used for color reproduction.

[ERASE]

Delete individual pictures, multiple selected pictures, or all pictures.

Option	Description
[FRAME]	Delete pictures one at a time.
[SELECTED FRAMES]	Delete multiple selected pictures.
[ALL FRAMES]	Delete all unprotected pictures.

[FRAME]

1. Select [FRAME] for [ERASE] in the playback menu.

2. Press the focus stick (focus lever) left or right to scroll through pictures and press [MENU]/[OK] to delete.

[SELECTED FRAMES]

1. Select [SELECTED FRAMES] for [ERASE] in the playback menu.

2. Highlight pictures and press [MENU]/[OK] to select.

   • Selected pictures are indicated by check marks (R).
   • To deselect a highlighted picture, press [MENU]/[OK] again.

3. When the operation is complete, press [DISP]/[BACK] to display a confirmation dialog.

4. Highlight [OK] and press [MENU]/[OK] to delete the selected pictures.

[ALL FRAMES]

1. Select [ALL FRAMES] for [ERASE] in the playback menu.

2. A confirmation dialog will be displayed; highlight [OK] and press [MENU]/[OK] to delete all unprotected pictures.

[CROP]

Create a cropped copy of the current picture.

1. Display the desired picture.

2. Select [CROP] in the playback menu.

3. Use the rear command dial to zoom in and out and press the focus stick (focus lever) up, down, left, or right to scroll the picture until the desired portion is displayed.

4. Press [MENU]/[OK] to display a confirmation dialog.

5. Press [MENU]/[OK] again to save the cropped copy to a separate file.

[RESIZE]

Create a small copy of the current picture.

1. Display the desired picture.

2. Select [RESIZE] in the playback menu.

3. Highlight a size and press [MENU]/[OK] to display a confirmation dialog.

4. Press [MENU]/[OK] again to save the resized copy to a separate file.

[PROTECT]

Protect pictures from accidental deletion. Highlight one of the following options and press [MENU]/[OK].

Option	Description
[FRAME]	Protect selected pictures. Press the focus stick (focus lever) left or right to view pictures and press [MENU]/[OK] to select or deselect. Press [DISP]/[BACK] when the operation is complete.
[SET ALL]	Protect all pictures.
[RESET ALL]	Remove protection from all pictures.

[IMAGE ROTATE]

Rotate pictures.

1. Display the desired picture.

2. Select [IMAGE ROTATE] in the playback menu.

3. Press the focus stick (focus lever) down to rotate the picture 90° clockwise, up to rotate it 90° counterclockwise.

4. Press [MENU]/[OK]. The picture will automatically be displayed in the selected orientation whenever it is played back on the camera.

[RED EYE REMOVAL]

Remove red-eye from portraits. The camera will analyze the image; if red-eye is detected, the image will be processed to create a copy with reduced red-eye.

1. Display the desired picture.

2. Select [RED EYE REMOVAL] in the playback menu.

3. Press [MENU]/[OK].

[RATING]

Rate pictures using stars.

1. Select [RATING] in the playback menu.

2. Rotate the front command dial to choose a picture and the rear command dial to choose a rating of from 0 to 5 stars (“I”).

[VOICE MEMO SETTING]

Add a voice memo to the current photograph.

1. Select [ON] for [VOICE MEMO SETTING] in the playback menu.

2. Display a photo to which you wish to add a voice memo.

3. Press and hold the center of the front command dial to record the memo. Recording ends after 30 s or when you release the dial.

[IMAGE TRANSFER ORDER]

Select photos for upload to a paired smartphone or tablet.

1. Select [IMAGE TRANSFER ORDER] > [SELECT FRAMES] in the playback menu.

2. Highlight photos and press [MENU]/[OK] to select or deselect. Repeat until all the desired photos have been selected.

3. Press [DISP]/[BACK] to exit to playback.

   Pictures will be uploaded during shooting and playback and while the camera is off if [ON] is selected for both D[CONNECTION SETTING] > [Bluetooth/SMARTPHONE SETTING] > [Bluetooth ON/OFF] and [AUTO IMAGE TRANSFER ORDER] or if images are currently selected for upload using the [IMAGE TRANSFER ORDER] option in the playback menu.

[WIRELESS COMMUNICATION]

Connect to smartphones running the latest version of the FUJIFILM Camera Remote app. The smartphone can then be used to:

• Control the camera and take pictures remotely
• Receive pictures uploaded from the camera
• Browse the pictures on the camera and download selected pictures
• Upload location data to the camera

[SLIDE SHOW]

View pictures in an automated slide show. Press [MENU]/[OK] to start and press the focus stick (focus lever) right or left to skip ahead or back. Press [DISP]/[BACK] at any time during the show to view onscreen help. The show can be ended at any time by pressing [MENU]/[OK].

[PHOTOBOOK ASSIST]

Create books from your favorite photos.

Creating a Photobook

1. Select [NEW BOOK] for C[PLAY BACK MENU] > [PHOTOBOOK ASSIST].

2. Scroll through the images and press the focus stick (focus lever) up to select or deselect. Press [MENU]/[OK] to exit when the book is complete.

   Neither photographs a or smaller nor movies can be selected for photobooks.

   The first picture selected becomes the cover image. Press the focus stick down to select the current image for the cover instead.

3. Highlight [COMPLETE PHOTOBOOK] and press [MENU]/[OK] (to select all photos for the book, choose [SELECT ALL]). The new book will be added to the list in the photobook assist menu.

Viewing Photobooks

Highlight a book in the photobook assist menu and press [MENU]/[OK] to display the book, then press the focus stick (focus lever) left or right to scroll through the pictures.

Editing and Deleting Photobooks

Display the photobook and press [MENU]/[OK]. The following options will be displayed; select the desired option and follow the on-screen instructions.

• [EDIT]: Edit the book as described in “Creating a Photobook”.
• [ERASE]: Delete the book.

[PC AUTO SAVE]

Upload pictures from the camera to a computer running the latest version of FUJIFILM PC AutoSave (note that you must first install the software and configure the computer as a destination for images copied from the camera).

[PRINT ORDER (DPOF)]

Create a digital “print order” for DPOF-compatible printers.

1. Select C[PLAY BACK MENU] > [PRINT ORDER (DPOF)].

2. Select [WITH DATE]s to print the date of recording on pictures, [WITHOUT DATE] to print pictures without dates, or [RESET ALL] to remove all pictures from the print order before proceeding.

3. Display a picture you wish to include in or remove from the print order.

4. Press the focus stick (focus lever) up or down to choose the number of copies (up to 99).

   To remove a picture from the order, press the focus stick down until the number of copies is 0.

   Total number of prints

   

   Number of copies

   Repeat steps 3–4 to complete the print order.

5. The total number of prints is displayed in the monitor. Press [MENU]/[OK] to exit.

[instax PRINTER PRINT]

To print pictures to optional [Fujifilm instax SHARE] printers, first select D[CONNECTION SETTING] > [instax PRINTER CONNECTION SETTING] and enter the [instax SHARE] printer name (SSID) and password, then follow the steps below.

1. Turn the printer on.

2. Select C[PLAY BACK MENU] > [instax PRINTER PRINT]. The camera will connect to the printer.

   

3. Use the focus stick (focus lever) to display the picture you want to print, then press [MENU]/[OK]. The picture will be sent to the printer and printing will start.

   

   Pictures taken with other cameras cannot be printed.

   The area printed is smaller than the area visible in the LCD monitor.

   The displays may vary depending on the printer connected.

[DISP ASPECT]

Choose how High Definition (HD) devices display pictures with an aspect ratio of 3∶2 (this option is available only when an HDMI cable is connected).

	Option
	[16:9]	[3:2]
Display