[TIME CODE SETTING] (Movie Recording)
Adjust time code (hour, minute, second, and frame number) display settings for movie recording.
To display time code settings, press [MENU/OK] in the movie shooting display and select the Q ([TIME CODE SETTING]) tab.
[TIME CODE DISPLAY]
Select [ON] to display time codes during movie recording and playback.
Options | |
---|---|
[ON] | [OFF] |
[START TIME SETTING]
Choose the time code starting time.
Option | Description |
---|---|
[MANUAL INPUT] | Choose a start time manually. |
[CURRENT TIME] | Set the start time to the current time. |
[RESET] | Set the start time to 00:00:00. |
[COUNT UP SETTING]
Choose whether time is clocked continuously or only during movie recording.
Option | Description |
---|---|
[REC RUN] | Time is clocked only during movie recording. |
[FREE RUN] | Time is clocked continuously. |
[DROP FRAME]
At frame rates of [59.94P], and [29.97P], a discrepancy will gradually develop between the time code (measured in seconds) and the actual recording time (measured in fractions of a second). Choose whether the camera drops frames as necessary to match the recording time to the time code.
Option | Description |
---|---|
[ON] | The camera drops frames as necessary to maintain a strict match between the time code and the actual recording time. |
[OFF] | Frames are not dropped. |
The time code display varies with the option selected.
Selecting a frame rate of [23.98P] disables frame drop.
[HDMI TIME CODE OUTPUT]
Choose whether time codes are output to HDMI devices.
Options | |
---|---|
[ON] | [OFF] |
[TIME CODE SYNC. SETTING]
Choose whether to synchronize time codes with an external device.
[CONNECT TO ATOMOS AirGlu BT]
If [ON] is selected, the camera connects with paired external devices and synchronizes time codes. Because simultaneous connection with a smartphone is not possible, the smartphone icon is displayed in the yellow on the screen.
Options | |
---|---|
[ON] | [OFF] |
[PAIRING REGISTRATION]
Pair the ATOMOS AirGlu BT and camera.
- If the camera connects with the ATOMOS AirGlu BT, an icon appears on the screen.
- The pairing with the ATOMOS AirGlu BT can be ended using [Bluetooth/SMARTPHONE SETTING] > [Bluetooth DEVICE LIST] in the network/USB setting menu.
Time code synchronization state
You can check the time code synchronization state by the icons displayed on the EVF or LCD.
Icon | Synchronization state |
---|---|
(white) |
The time code synchronization function is not being used. |
(white) |
Time codes are being synchronized. |
(amber) |
External devices have been disconnected or time codes are not being synchronized. If time codes have been synchronized once, and the camera continues to count internally after [CONNECT TO ATOMOS AirGlu BT] was set to [ON], a value is displayed. |
(red) |
Time codes are not being synchronized because the frame rate settings are different. If time codes have been synchronized once, and the camera continues to count internally after [CONNECT TO ATOMOS AirGlu BT] was set to [ON], a value is displayed. |