Choose a focus point for autofocus. The procedure for selecting the focus point varies with the option chosen for AF mode.
Focus-area selection can also be accessed using the [AUTOFOCUS SETTING] option in the shooting menu.
Focus-area selection can also be used to choose the focus point for manual focus and focus zoom.
Press the selector up ([AF]) to display the focus points ("
") and focus frame.
Focus frame
Focus point
Use the selector to position the focus frame over the desired focus point, or press [DISP/BACK] to return to the center point.
To choose the size of the focus frame, rotate the sub-command dial. Rotate the dial left to reduce the frame by up to 50%, right to enlarge it by up to 150%, or press the center of the dial to restore the frame to its original size. Press [MENU/OK] to put your selection into effect.
Press the selector up ([AF]) to display the focus zone.
Use the selector to position the zone or press [DISP/BACK] to return the zone to the center of the display.
To choose the number of focus frames in the zone, rotate the sub-command dial. Rotate the dial right to cycle through zone sizes in the order 5 × 5, 3 × 3, 5 × 3, 5 × 5…, left to cycle through zone sizes in reverse order, or press the center of the dial to select a zone size of 5 × 3. Press [MENU/OK] to put your selection into effect.
Press the selector up ([AF]) to display the focus frame.
Manual focus-frame selection is not available when wide/tracking is selected in focus mode [S].
Use the selector to position the focus frame, or press [DISP/BACK] to return the frame to the center of the display. Press [MENU/OK] to put your selection into effect. The camera will track focus on the subject while the shutter button is pressed halfway.
.
