• The Setup Menus
• [SCREEN SETTING]

Enter a search term and click .

Make changes to display settings.

---

---

[EVF BRIGHTNESS]

Adjust the brightness of the display in the electronic viewfinder.

Option	Description
[AUTO]	Automatic brightness adjustment.
[MANUAL]	Adjust brightness manually; choose from options between −7 and +5.

[EVF COLOR]

Adjust the saturation of the display in the electronic viewfinder.

[EVF COLOR ADJUSTMENT]

Adjust the color of the display in the electronic viewfinder.

1. Adjust colors using the focus stick (focus lever).

   

2. Press [MENU/OK].

[LCD BRIGHTNESS]

Adjust monitor brightness.

[LCD COLOR]

Adjust monitor saturation.

[LCD COLOR ADJUSTMENT]

Adjust the color of the display in the LCD monitor.

1. Adjust colors using the focus stick (focus lever).

2. Press [MENU/OK].

[IMAGE DISP.]

Choose how long images are displayed after shooting.

Option	Description
[CONTINUOUS]	Pictures are displayed until the [MENU/OK] button is pressed or the shutter button is pressed halfway. To zoom in on the active focus point, press the center of the rear command dial; press again to cancel zoom.
[1.5 SEC]/[0.5 SEC]	Pictures are displayed for the selected time or until the shutter button is pressed halfway.
[OFF]	Pictures are not displayed after shooting.

[AUTOROTATE DISPLAYS]

Choose whether the indicators in the viewfinder and LCD monitor rotate to match camera orientation.

Options
[ON]	[OFF]

[PREVIEW EXP./WB IN MANUAL MODE]

Choose whether to enable exposure and/or white balance preview in manual exposure mode.

Option	Description
[PREVIEW EXP./WB]	Enable exposure and white balance preview.
[PREVIEW WB]	Preview white balance only. Choose this option in situations in which exposure and white balance are likely to change during shooting, as may be the case when you use a flash with an incandescent monitoring lamp.
[OFF]	Disable exposure and white balance preview. Choose this option when using a flash or on other occasions on which exposure may change when the picture is taken.

[NATURAL LIVE VIEW]

Choose whether the effects of film simulation, white balance, and other settings are visible in the monitor.

Option	Description
[ON]	The effects of camera settings are not visible in the monitor, but shadows in low-contrast, back-lit scenes and other hard-to-see subjects more visible. Colors and tone will differ from those in the final picture. The display will however be adjusted to show the effects of monochrome and sepia settings.
[OFF]	The effects of film simulation, white balance, and other settings can be previewed in the monitor.

[FRAMING GUIDELINE]

Choose a framing grid for shooting mode.

	Option
	F [GRID 9]	G [GRID 24]	H [HD FRAMING]
Display
	For “rule of thirds” composition.	A six-by-four grid.	Frame HD pictures in the crop shown by the lines at the top and bottom of the display.

[AUTOROTATE PB]

Choose [ON] to automatically rotate “tall” (portrait-orientation) pictures during playback.

Options
[ON]	[OFF]

[PLAYBACK MAGNIFICATION]

Choose the zoom ratio selected when the center of the rear command dial is pressed during playback.

Option	Description
[2x (FROM CENTER)]	View the center area of the picture at the selected zoom ratio. Regardless of the setting selected, pictures will not be displayed at greater than actual size.
[4x (FROM CENTER)]
[8x (FROM CENTER)]
[ACTUAL SIZE (FROM FOCUS POINT)]	View the picture at actual size, centered on the focus area. The zoom ratio varies with the size of the image.
[PREVIOUS MAG. (FROM CENTER)]	Display each picture at the same zoom ratio as the previous picture, starting at the center of the image. Pictures will not, however, be displayed at greater than actual size.

[FOCUS SCALE UNITS]

Choose the units used for the focus distance indicator.

Options
[METERS]	[FEET]

[DUAL DISPLAY SETTING]

Choose the content of the two windows in the dual display.

Option	Description
[R:FOCUS L:FRAME]	The right (small) window shows a close-up of the focus area, while the left (large) window shows the entire frame.
[R:FRAME L:FOCUS]	The right (small) window shows the entire frame, while the left (large) window shows a close-up of the focus area.

[DISP. CUSTOM SETTING]

Choose the items shown in the standard indicator display (aCustomizing the Standard Display).

[LARGE INDICATORS MODE(EVF)]

Select [ON] to display large indicators in the electronic viewfinder. The indicators displayed can be selected using D[SCREEN SET-UP] > [LARGE INDICATORS DISP. SETTING].

[LARGE INDICATORS MODE(LCD)]

Select [ON] to display large indicators in the LCD monitor. The indicators displayed can be selected using D[SCREEN SET-UP] > [LARGE INDICATORS DISP. SETTING].

[LARGE INDICATORS DISP. SETTING]

Option	Description
A[Expo. DISP.]	Choose the items listed at the bottom of the display. Selected items are indicated by check marks (R); to deselect, highlight the check marks and press [MENU/OK].
Bd [Scale]	Select [ON] to display the exposure indicator.
C[L1], [L2], [L3], [L4]	Choose up to four large icons for display on the left side of the screen.
D[R1], [R2], [R3], [R4]	Choose up to four large icons for display on the right side of the screen.

[INFORMATION CONTRAST ADJ.]

Adjust display contrast.

Option	Description
[HIGH CONTRAST]	High contrast.
[STANDARD]	Normal contrast.
[LOW CONTRAST]	Low contrast.
[DARK AMBIENT LIGHTING]	Contrast adjusted for dim ambient lighting.

[LOCATION INFO]

Select [ON] to display location info downloaded from a smartphone.

Options
[ON]	[OFF]

[SUB MONITOR SETTING]

Choose the indicators displayed in the secondary LCD monitor. Separate displays are available for still photography and movie recording. Choose from the following:

Option	Description
[INFORMATION]	Display camera settings. You can choose the settings displayed.
[DIALS]	Display dials showing ISO sensitivity and shutter speed.
[HISTOGRAM]	Display a histogram.

The [INFORMATION] Display

Follow the steps below to choose the indicators shown in the [INFORMATION] display.

1. Select D [SCREEN SET-UP] > [SUB MONITOR SETTING] in the setup menu.

2. Highlight [STILL MODE] or [MOVIE MODE] and press [MENU/OK].

3. Highlight [INFORMATION] and press [MENU/OK].

   

4. Highlight the indicator you wish to change and press [MENU/OK].

   

5. Highlight the indicator you wish to display and press [MENU/OK].

   

   Choose from:

   • [SHUTTER SPEED]
   • [APERTURE]
   • [EXPO. COMP.]
   • [ISO]
   • [MOVIE MODE]
   • [SHOOTING MODE]
   • [PHOTOMETRY]
   • [DRIVE MODE]
   • [FOCUS MODE]

   • [WHITE BALANCE]
   • [IMAGE SIZE/QUALITY]
   • [SHUTTER TYPE]
   • [FILM SIMULATION]
   • [DYNAMIC RANGE]
   • [35mm FORMAT MODE]
   • [DUAL IS MODE]
   • [SELF-TIMER]
   • [NONE]

6. Repeat Steps 4 and 5 to change additional indicators.

[SUB MONITOR BACKGROUND COLOR]

Adjusting the background color of the secondary LCD monitor according to lighting conditions makes the display easier to read.

Option	Description
[BLACK]	Recommended for use with dark ambient lighting.
[WHITE]	Recommended for use with bright ambient lighting.

x[Q MENU BACKGROUND]

Choose the background color used for the quick menu when it is displayed during still photography.

Options
[TRANSPARENT]	[BLACK]

F[Q MENU BACKGROUND]

Choose the background color used for the quick menu when it is displayed during movie recording.

Options
[TRANSPARENT]	[BLACK]