[IMAGE QUALITY SETTING] (Still Photography)
Adjust image quality settings for still photography.
To display image quality settings, press [MENU/OK] in the photo shooting display and select the H ([IMAGE QUALITY SETTING]) tab.
The options available vary with the shooting mode selected.
[IMAGE SIZE]
Choose the size and aspect ratio at which still pictures are recorded.
Option (Image size) | |
---|---|
O4 : 3 (11648× 8736) | O65 : 24 (11648 × 4304) |
O3 : 2 (11648 × 7768) | O5 : 4 (10928 × 8736) |
O16 : 9 (11648 × 6552) | O7 : 6 (10192 × 8736) |
O1 : 1 (8736 × 8736) | |
P4 : 3 (8256× 6192) | P65 : 24 (8256 × 3048) |
P3 : 2 (8256 × 5504) | P5 : 4 (7744 × 6192) |
P16 : 9 (8256 × 4640) | P7 : 6 (7232 × 6192) |
P1 : 1 (6192 × 6192) | |
Q4 : 3 (4000 × 3000) | Q65 : 24 (4000 × 1480) |
Q3 : 2 (4000 × 2664) | Q5 : 4 (3744 × 3000) |
Q16 : 9 (4000 × 2248) | Q7 : 6 (3504 × 3000) |
Q1 : 1 (2992 × 2992) |
[IMAGE SIZE] is not reset when the camera is turned off or another shooting mode is selected.
[IMAGE QUALITY]
Choose a file format and compression ratio.
Option | Description |
---|---|
[SUPER FINE] | Very low compression ratios are used for maximum image quality. |
[FINE] | Low compression ratios are used for higher-quality images. |
[NORMAL] | Higher compression ratios are used to increase the number of images that can be stored. |
[SUPER FINE+RAW] | Record both RAW and super-fine quality JPEG or HEIF images. |
[FINE+RAW] | Record both RAW and fine-quality JPEG or HEIF images. |
[NORMAL+RAW] | Record both RAW and normal-quality JPEG or HEIF images. |
[RAW] | Record RAW images only. |
The Function Buttons
To toggle RAW image quality on or off for a single shot, assign [RAW] to a function button (aFunction Controls). Press the button once to select the option in the right column, again to return to the original setting (left column).
Option currently selected for [IMAGE QUALITY] | Option selected by pressing function button to which [RAW] is assigned |
---|---|
[SUPER FINE] | [SUPER FINE+RAW] |
[FINE] | [FINE+RAW] |
[NORMAL] | [NORMAL+RAW] |
[SUPER FINE+RAW] | [SUPER FINE] |
[FINE+RAW] | [FINE] |
[NORMAL+RAW] | [NORMAL] |
[RAW] | [FINE] |
[RAW RECORDING]
Choose whether to compress RAW images.
[RECORDING TYPE]
Option | Description |
---|---|
[UNCOMPRESSED] | RAW images are not compressed. |
[LOSSLESS] | RAW images are compressed using a reversible algorithm that reduces file size with no loss of image data. The images can be viewed in FUJIFILM RAW Converter 1, Capture One 1, RAW FILE CONVERTER EX powered by SILKYPIX 2, FUJIFILM X RAW STUDIO, or other software that supports “lossless” RAW compression. Quality is the same as [UNCOMPRESSED], but the resulting files are anywhere from about 30 to 90 percent (14-bit RAW) or 45 to 100 percent (16-bit RAW) of their uncompressed size. |
[COMPRESSED] | RAW images are compressed using a “lossy”, non-reversible algorithm. Quality is about the same as [UNCOMPRESSED], but the resulting files are anywhere from about 25 to 35 percent (14-bit RAW) or 30 to 40 percent (16-bit RAW) of their uncompressed size. |
For information on when support will be available, visit:
For information on when support will be available, visit:
[OUTPUT DEPTH(bit)]
Option | Description |
---|---|
[16bit] | RAW pictures are recorded at a bit depth of 16 bits. |
[14bit] | RAW pictures are recorded at a bit depth of 14 bits. |
[16bit] is available in [STILL IMAGE] and [PIXEL SHIFT MULTI SHOT] drive modes only.
[SELECT JPEG/HEIF]
Choose whether pictures are recorded in JPEG or HEIF.
Option | Description |
---|---|
[JPEG] | Pictures are recorded in the widely-supported JPEG format. |
[HEIF] | Pictures are recorded in HEIF, a format with excellent compression but limited options for viewing and sharing. |
[JPEG] is automatically selected in place of [HEIF] during multiple-exposure photography.
Selecting [HEIF] disables [CLARITY] and sets [COLOR SPACE] to [sRGB].
HEIF pictures are stored on the memory card as files with the extension “.HIF”. Before the pictures can be viewed on a computer, the extension must be changed to “.HEIC”. This occurs automatically when HEIF pictures are uploaded from the camera to a computer via USB.
[FILM SIMULATION]
Simulate the effects of different kinds of film, including black-and-white (with or without color filters). Choose a palette according to your subject and creative intent.
Option | Description |
---|---|
c[PROVIA/STANDARD] |
Ideal for a wide range of subjects. |
d[Velvia/VIVID] |
Vibrant reproduction, ideal for landscape and nature. |
e[ASTIA/SOFT] |
Softer color and contrast for a more subdued look. |
i[CLASSIC CHROME] |
Soft color and enhanced shadow contrast for a calm look. |
c[REALA ACE] |
Faithful color reproduction with hard tonality suitable for various scenes. |
g[PRO Neg. Hi] |
Ideal for portrait with slightly enhanced contrast. |
h[PRO Neg. Std] |
Neutral tonality, best for editing images. Ideal for portrait with soft gradations and skin tones. |
g[CLASSIC Neg.] |
Enhanced color with hard tonality to increase image depth. |
n[NOSTALGIC Neg.] |
Amber tinted highlights and rich shadow tone for printed photo look. |
X[ETERNA/CINEMA] |
Soft color and rich shadow tone suitable for film look movie. |
N[ETERNA BLEACH BYPASS] |
Unique color with low saturation and high contrast. Suitable for still and movie. |
a[ACROS] |
Shoot in Black and White In rich details with sharpness. Available with yellow ([Ye]), red ([R]), and green ([G]) filters, which deepen shades of gray corresponding to hues complementary to the selected color.
|
b[MONOCHROME] |
Shoots in black and white. Available with yellow ([Ye]), red ([R]), and green ([G]) filters, which deepen shades of gray corresponding to hues complementary to the selected color.
|
f[SEPIA] |
Shoots in sepia tone. |
Film simulation options can be combined with tone and sharpness settings.
Film simulation settings can also be accessed via shortcuts (aShortcut Options).
For more information, visit:
[MONOCHROMATIC COLOR]
Add a reddish or bluish tinge (warm or cool color cast) to the a[ACROS] and b[MONOCHROME] monochrome film simulations. Color can be adjusted on the [WARM]–[COOL] and [G] (Green)–[M] (Magenta) axes.
[GRAIN EFFECT]
Add a film grain effect.
[ROUGHNESS]
Option | Description |
---|---|
[STRONG] | Choose for rougher grains. |
[WEAK] | Choose for smoother grains. |
[OFF] | Turn the effect off. |
[SIZE]
Option | Description |
---|---|
[LARGE] | Choose for coarser grains. |
[SMALL] | Choose for finer grains. |
[COLOR CHROME EFFECT]
Increase the range of tones available for rendering colors that tend to be highly saturated, such as reds, yellows, and greens.
Option | Description |
---|---|
[STRONG] | Choose for a strong effect. |
[WEAK] | Choose for a weak effect. |
[OFF] | Turn the effect off. |
[COLOR CHROME FX BLUE]
Increase the range of tones available for rendering blues.
Option | Description |
---|---|
[STRONG] | Choose for a strong effect. |
[WEAK] | Choose for a weak effect. |
[OFF] | Turn the effect off. |
[SMOOTH SKIN EFFECT]
Smooth complexions.
Option | Description |
---|---|
[STRONG] | Choose for a strong effect. |
[WEAK] | Choose for a weak effect. |
[OFF] | Turn the effect off. |
[DYNAMIC RANGE]
Adjust dynamic range. Wide dynamic ranges reduce loss of detail in highlights for more natural results with high-contrast or backlit scenes.
Option | Description | |
---|---|---|
[AUTO] | V[100%] |
Choose for increased contrast. Reduce loss of detail in highlights. |
W[200%] | ||
X[400%] |
Mottling may appear in pictures taken at higher values. Choose a value according to the scene.
If [AUTO] is selected, the camera will automatically choose either V[100%] or W[200%] according to the subject and shooting conditions. Shutter speed and aperture will be displayed when the shutter button is pressed halfway.
W[200%] is available at sensitivities of from ISO 160 to ISO 12800, X[400%] at sensitivities of from ISO 320 to 12800.
[D RANGE PRIORITY]
Reduce loss of detail in highlights and shadows for natural-looking results when photographing high-contrast scenes.
Option | Description |
---|---|
[AUTO] | Contrast is adjusted automatically in response to lighting conditions. |
[STRONG] | Adjust dynamic range by a large amount for very high-contrast scenes. |
[WEAK] | Adjust dynamic range by a smaller amount for moderately high-contrast scenes. |
[OFF] | Contrast reduction off. |
[WEAK] is available at sensitivities of from ISO 160 to ISO 12800, [STRONG] at sensitivities of from ISO 320 to 12800.
When an option other than [OFF] is selected, [TONE CURVE], and [DYNAMIC RANGE] will be adjusted automatically; if you wish to adjust these settings manually, choose [OFF].
[WHITE BALANCE]
For natural colors, choose a white balance option that matches the light source.
Option | Description |
---|---|
WA[WHITE PRIORITY] | White balance is adjusted automatically. Choose for whiter whites in scenes lit by incandescent bulbs. |
[AUTO] | White balance is adjusted automatically. |
AA[AMBIENCE PRIORITY] | White balance is adjusted automatically. Choose for warmer whites in scenes lit by incandescent bulbs. |
k[CUSTOM 1] | Measure a value for white balance. |
l[CUSTOM 2] | |
m[CUSTOM 3] | |
k[COLOR TEMPERATURE] | Choose a color temperature. |
i[DAYLIGHT] | For subjects in direct sunlight. |
j[SHADE] | For subjects in the shade. |
k[FLUORESCENT LIGHT-1] | Use under “daylight” fluorescent lights. |
l[FLUORESCENT LIGHT-2] | Use under “warm white” fluorescent lights. |
m[FLUORESCENT LIGHT-3] | Use under “cool white” fluorescent lights. |
n[INCANDESCENT] | Use under incandescent lighting. |
g[UNDERWATER] | Reduces the blue cast typically associated with underwater lighting. |
In conditions in which [AUTO] fails to produce the desired results—for example, under certain types of lighting or in close-ups of portrait subjects—use custom white balance or choose a white balance option suited to the light source.
White balance is adjusted for flash lighting only in [AUTO], WA[WHITE PRIORITY], AA[AMBIENCE PRIORITY], and g[UNDERWATER] modes. Turn the flash off using other white balance options.
White balance options can also be accessed via shortcuts (aShortcut Options).
Fine-Tuning White Balance
Pressing [MENU/OK] after selecting a white balance option displays a fine-tuning dialog; use the focus stick (focus lever) to fine-tune white balance.
To exit without fine-tuning white balance, press [DISP/BACK] after selecting a white balance option.
You cannot tilt the focus stick diagonally when fine-tuning white balance.
Custom White Balance
Choose k, l, or m to adjust white balance for unusual lighting conditions using a white object as a reference (colored objects can also be used to lend photos a color cast). A white balance target will be displayed; position and size the target so that it is filled by the reference object and press the shutter button all the way down to measure white balance (to select the most recent custom value and exit without measuring white balance, press [DISP/BACK] or press [MENU/OK] to select the most recent value and display the fine-tuning dialog).
- If “[COMPLETED !]” is displayed, press [MENU/OK] to set white balance to the measured value.
- If “[UNDER]” is displayed, raise exposure compensation and try again.
- If “[OVER]” is displayed, lower exposure compensation and try again.
kColor Temperature
Adjust white balance to match the color temperature of the light source.
Color temperature can be adjusted to make pictures “warmer” or “colder” or deliberately produce colors that differ radically from those in real life.
-
Select k in the white balance menu. The option currently selected for color temperature will be displayed.
-
Edit the color temperature using the focus stick (focus lever) and press [MENU/OK].
A fine-tuning dialog will be displayed.
You can also adjust color temperature in increments of 10 K by rotating the rear command dial.
Choose from values of from 2500 to 10000 K.
To exit without fine-tuning white balance, press [DISP/BACK] after choosing a color temperature.
-
Highlight a fine-tuning amount using the focus stick.
-
Press [MENU/OK].
The changes will be applied. The selected color temperature will appear in the display.
Color Temperature
Color temperature is an objective measure of the color of a light source, expressed in Kelvin (K). Light sources with a color temperature close to that of direct sunlight appear white; light sources with a lower color temperature have a yellow or red cast, while those with a higher color temperature are tinged with blue.
[TONE CURVE]
With reference to a tone curve, adjust the appearance of highlights or shadows, making them harsher or softer. Choose higher values to make shadows and highlights harsher, lower values to make them softer.
Option | Description |
---|---|
[HIGHLIGHTS] | -2 to +4 |
[SHADOWS] | -2 to +4 |
[COLOR]
Adjust color density.
Options | ||||||||
---|---|---|---|---|---|---|---|---|
[-4] | [-3] | [-2] | [-1] | [0] | [+1] | [+2] | [+3] | [+4] |
[SHARPNESS]
Sharpen or soften outlines.
Options | ||||||||
---|---|---|---|---|---|---|---|---|
[-4] | [-3] | [-2] | [-1] | [0] | [+1] | [+2] | [+3] | [+4] |
[HIGH ISO NR]
Reduce noise in pictures taken at high sensitivities. Choose higher values to reduce noise and smooth outlines, lower values to leave outlines visible.
Options | ||||||||
---|---|---|---|---|---|---|---|---|
[-4] | [-3] | [-2] | [-1] | [0] | [+1] | [+2] | [+3] | [+4] |
[CLARITY]
Increase definition while altering tones in highlights and shadows as little as possible. Choose higher values for increased definition, lower values for a softer effect.
Options | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
[-5] | [-4] | [-3] | [-2] | [-1] | [0] | [+1] | [+2] | [+3] | [+4] | [+5] |
The additional processing required at settings other than 0 increases the time need to save each shot.
[LONG EXPOSURE NR]
Select [ON] to reduce mottling in long time-exposures.
Options | |
---|---|
[ON] | [OFF] |
The additional processing required when [ON] is selected increases save times.
[LENS MODULATION OPTIMIZER]
Select [ON] to improve definition by adjusting for diffraction and the slight loss of focus at the periphery of the lens.
Options | |
---|---|
[ON] | [OFF] |
[COLOR SPACE]
Choose the gamut of colors available for color reproduction.
Option | Description |
---|---|
[sRGB] | Recommended in most situations. |
[Adobe RGB] | For commercial printing. |
xF[PIXEL MAPPING]
Use this option if you notice bright spots in your pictures or movies.
-
Press [MENU/OK] in the shooting display and select the H[IMAGE QUALITY SETTING] tab.
-
Highlight xF[PIXEL MAPPING] and press [MENU/OK] to perform pixel mapping.
Results are not guaranteed.
Be sure the battery is fully charged before beginning pixel mapping.
Pixel mapping is not available when the camera temperature is elevated.
Processing may take several tens of seconds.
x[EDIT/SAVE CUSTOM SETTING]
Save custom camera settings for commonly-encountered situations. Saved settings can be recalled by rotating the mode dial to positions [C1] ([CUSTOM 1]) through [C6] ([CUSTOM 6]) (aCustom Modes).
[AUTO UPDATE CUSTOM SETTING]
Choose whether changes to saved custom settings apply automatically.
Option | Description |
---|---|
[ENABLE] | Changes to custom settings banks [CUSTOM 1] through [CUSTOM 6] apply automatically. |
[DISABLE] | Changes do not apply automatically. Any changes to custom settings must be applied manually (aEditing Custom Settings). |
xF[MOUNT ADAPTOR SETTING]
Adjust settings for lenses attached via a mount adapter.
Any changes made using this item also apply in movie mode (axF[MOUNT ADAPTOR SETTING] (Movie Recording)).
Shutter Select
When using lenses with an internal shutter, choose whether to use the shutter on the camera ([BODY]) or the lens ([LENS]).
This option may have no effect with some lenses.
Saved Settings
Store settings for up to 6 lenses, or choose [OFF] to disable corrections for focal length, distortion, color shading, and peripheral illumination.
Choosing a Focal Length
Use the focus stick (focus lever) to enter the focal length.
Distortion Correction
Choose from [STRONG], [MEDIUM], or [WEAK] options to correct [BARREL] or [PINCUSHION] distortion.
Color Shading Correction
Color (shading) variations between the center and edges of the frame can be adjusted separately for each corner.
To use color shading correction, follow the steps below.
-
Rotate the rear command dial to choose a corner. The selected corner is indicated by a triangle.
-
Use the focus stick (focus lever) to adjust shading until there is no visible difference in color between the selected corner and the center of the image.
- Press the focus stick left or right to adjust colors on the cyan–red axis.
- Press the focus stick up or down to adjust colors on the blue–yellow axis.
To determine the amount required, adjust color shading correction while taking photos of blue sky or a sheet of gray paper.
Peripheral Illumination Correction
Choose from values between –5 and +5. Choosing positive values increases peripheral illumination, while choosing negative values reduces peripheral illumination. Positive values are recommended for vintage lenses, negative values to create the effect of images taken with an antique lens or a pinhole camera.
To determine the amount required, adjust peripheral illumination correction while taking photos of blue sky or a sheet of gray paper.
EDIT LENS NAME
Change the lens name.