Enter a search term and click .

Errors

If a C icon appears in the display, select [INFORMATION] > [ERROR DESCRIPTION] in the network/USB setting menu to view the error and then take the appropriate action.

Error Solution
[NOT CONNECTED TO NETWORK VIA WIRELESS LAN]
  • No connection to access point: Confirm that the access point is on, verify its settings and IP address, and check that there are no obstructions blocking its signal. If necessary, move the camera closer to the access point.
  • Camera settings have not been correctly adjusted for connection to the access point: Check that the password, encryption type, and SSID match those chosen for the access point.
[IP ADDRESS CANNOT BE ASSIGNED BY DHCP SERVER OR THERE IS AN ISSUE WITH IP ADDRESS SETTING PLEASE CHECK SETTINGS]
  • No DHCP server: If there is no DHCP server on the network, enter the IP address and other information manually.
  • The DHCP server is down: Contact the network administrator.
[CA ROOT CERTIFICATE IS INVALID] The root certificate has expired: After confirming that the camera clock is set to the correct time and date, load an updated CA root certificate.
[Frame.io DISCONNECTED]
  • The Frame.io server may be down: Check that the Frame.io server is up or try again later.
  • The camera clock is not set to the correct time and date: Set the camera clock.
  • The network is not configured correctly: Check the settings of the connected network.
  • Turn the camera off and then on again.
  • Contact the network administrator.
[UNEXPECTED ERROR HAS OCCURRED]
  • Turn the camera off and then on again.
  • Contact the network administrator.