.Lenses
The camera can be used with lenses for the FUJIFILM G-mount.
Lens Parts
ALens hood
BMounting marks
CFocus ring
DAperture ring lock release
EMounting marks (focal length)
FAperture ring
GLens signal contacts
HFront lens cap
IRear lens cap
A GF63mmF2.8 R WR lens is used here for illustrative purposes.
Lens Care
- Use a blower to remove dust, then gently wipe with a soft, dry cloth. Any remaining stains can be removed by wiping gently with a piece of Fujifilm lens-cleaning paper to which a small amount of lens-cleaning fluid has been applied.
- Replace the front and rear caps when the lens is not in use.
Removing Lens Caps
Remove lens caps as shown.
Lens caps may differ from those shown.
Attaching Lens Hoods
When attached, lens hoods reduce glare and protect the front lens element.
Aperture Rings
In modes [A] (aperture-priority AE) and [M] (manual), you can choose the aperture (f-number) by rotating the lens aperture ring.
Aperture ring
Aperture ring lock release
| Setting | Description | |
|---|---|---|
 |
[C] | With the aperture ring in the [C] or [A] position, you can choose the aperture (f-number) by rotating the camera command dial. |
 |
[A] | |
 |
Other values | Set aperture to the selected value. |
To select [C] or [A], or to select another value after selecting [C] or [A], press the aperture ring lock release while rotating the aperture ring.
T/S Lenses
View the shift amount or rotate amount of lenses on the EVF or LCD (aCustomizing the Standard Display). The shift and rotate amounts are displayed in increments of 0.5 mm and 3°, respectively.
The shift amount and rotate amount are also recorded to the EXIF data of images that have been taken.
