.[POWER MANAGEMENT]
Adjust power management settings.
To access power management settings, press [MENU/OK], select the D ([SET UP]) tab, and choose [POWER MANAGEMENT].
[AUTO POWER OFF]
Choose the length of time before the camera turns off automatically when no operations are performed. Shorter times increase battery life; if [OFF] is selected, the camera must be turned off manually.
| Options | |||||
|---|---|---|---|---|---|
| [5 MIN] | [2 MIN] | [1 MIN] | [30 SEC] | [15 SEC] | [OFF] |
[PERFORMANCE] (
)
Select [BOOST] to improve focus and EVF display performance.
[BOOST]
Boost camera focus and EVF display performance. The battery drains faster than when is [NORMAL] selected. You can choose to assign priority to:
| Option | Description |
|---|---|
| [AF PRIORITY - NORMAL] |
Focus speed. |
| [AF PRIORITY - LOW LIGHT] |
Focus speed while adjusting EVF and LCD brightness to make objects in shadows easier to see. Some ghosting may be visible with blurred images. |
| [EVF RESOLUTION PRIORITY] | Viewfinder resolution. |
| [EVF FRAME RATE PRIORITY] | Viewfinder frame rate for smoother motion. |
Regardless of the option selected, the camera functions in [AF PRIORITY - NORMAL] mode while the monitor is on.
[NORMAL]
Choose for standard focus and EVF display performance and battery endurance.
[SHOOTING STAND BY MODE]
Choose the delay before the camera enters shooting standby mode.
| Option | Description |
|---|---|
| [5 MIN] | The camera will suspend all functions and enter powering-saving (standby) mode if no operations are performed for the selected period. To exit shooting standby mode, press the [MENU/OK] button or another control. |
| [2 MIN] | |
| [1 MIN] | |
| [30 SEC] | |
| [15 SEC] | |
| [OFF] | Shooting standby mode disabled. |
[AUTO POWER SAVE]
If [ON] is selected, the display frame rate will drop to save power if no operations are performed for a short period, but the normal frame rate can be restored by operating camera controls.
| Options | |
|---|---|
| [ON] | [OFF] |
