.Look
Set whether to apply the LUTs (Lookup Tables) set for each footage of the memory card, LCD monitor display, and SDI/HDMI output to the output footage.
Setting LUTs
Navigate to [PROJECT] > [LUT SETTING] to select the LUT to apply to each type of footage. LUT settings recorded on the memory card can also be loaded into the camera for use.
The types of video output to the memory card, LCD monitor, SDI OUT connector, and HDMI OUT connector can be changed in [PROJECT] > [F-Log/HLG/RAW].
Applying to Footage
Set whether to apply the configured LUTs to each footage.
-
Press [HOME] in shooting mode.
The [HOME] options will be displayed on the side monitors.
-
Press Screen button 5.
Combinations are displayed regarding whether to apply LUTs to each output. The LUTs will be applied to the outputs to which [LOOK] is set. The LUTs will not be applied to the outputs to which [CLEAN] is set.
The available combinations are as follows:
Option Description [A] The LUTs will be applied only on the LCD monitor display. [B] The LUTs will be applied to all of the memory card, LCD monitor, and SDI/HDMI outputs. [C] The LUTs will not be applied to any of the memory card, LCD monitor, or SDI/HDMI outputs. -
Rotate the selector dial to highlight a combination of settings and press the center of the selector dial.
Press [LUT] (Screen button 4) to adjust the [LUT SETTING].
Press [CHECK] (Screen button 6) to adjust settings for [SDI/HDMI OUTPUT INFO DISPLAY]. When [ON] is selected for [SDI/HDMI OUTPUT INFO DISPLAY], the SDI/HDMI output will have the same settings as the LCD monitor, regardless of the selected combination.
