• The Menus
• [MONITOR SETTING]

Enter a search term and click .

Adjust display settings.

---

[SDI/HDMI OUTPUT SETTING]

Adjust settings for footage output to the SDI OUT and HDMI OUT connectors.

[SDI OUTPUT SETTING]

Set whether to output footage to the SDI OUT connector.

Options
[ON]	[OFF]

[SDI REC CONTROL]

Set whether to output movie start and stop signals from the SDI OUT connector in conjunction with the [REC] button.

Options
[ON]	[OFF]

[HDMI OUTPUT]

Set whether to output footage to the HDMI OUT connector.

Options
[ON]	[OFF]

[HDMI REC CONTROL]

Set whether to output movie start and stop signals from the HDMI OUT connector in conjunction with the [REC] button.

Options
[ON]	[OFF]

[SDI/HDMI OUTPUT INFO DISPLAY]

Set whether to output the information displayed on the LCD monitor to the SDI OUT or HDMI OUT connectors.

Options
[ON]	[OFF]

[SDI/HDMI OUTPUT RESOLUTION]

Set the resolution of the footage output to the SDI OUT or HDMI OUT connectors.

Options
[8K]	[4K]	[4K DCI]	[FHD]

[SDI/HDMI OUTPUT FPS]

Set the frame rate of footage output to the SDI OUT or HDMI OUT connectors.

Options
[PROJECT FPS]	[RECORDING FPS]

[WAVEFORM/VECTORSCOPE]

Choose whether to display chrominance and luminance signals during movie recording.

[WAVEFORM]

A waveform is displayed.

[PARADE]

An RGB parade is displayed.

[VECTORSCOPE]

A vectorscope is displayed.

[RGB HISTOGRAM]

An RGB histogram is displayed.

[HISTOGRAM]

A histogram is displayed.

[OFF]

Neither a waveform monitor, a parade, a vectorscope, nor a histogram is displayed.

[FOCUS PEAK HIGHLIGHT]

The camera heightens high-contrast outlines when using manual focus. This allows you to check whether the subject is in focus.

[SCREEN SET-UP]

Select a combination of outline color and peaking level.

Options
[WHITE(LOW)]	[WHITE(HIGH)]	[RED(LOW)]
[RED(HIGH)]	[BLUE(LOW)]	[BLUE(HIGH)]
[YELLOW(LOW)]	[YELLOW(HIGH)]	[OFF]

[INTERLOCK MF ASSIST & FOCUS RING]

If [ON] is selected, display the information set using [SCREEN SET-UP] only when the focus ring is rotated in manual focus.

Options
[ON]	[OFF]

[ZEBRA SETTING]

Set whether to display highlights that may be overexposed by zebra stripes.

[SCREEN SET-UP]

Set whether to display zebra stripes.

Options
[ZEBRA RIGHT]	[ZEBRA LEFT]	[OFF]

[ZEBRA LEVEL]

Choose the brightness threshold for the zebra stripe display.

[FRAMING GUIDELINE]

Set a framing grid for shooting mode.

[FRAMING GUIDELINE DISP]

Set whether to display a framing grid.

Options
[ON]	[OFF]

[FRAME1], [FRAME2], [FRAME3]

Set three types of frames individually.

[FRAME1 DISP], [FRAME2 DISP], [FRAME3 DISP]

Set whether to display a frame.

Options
[ON]	[OFF]

[ASPECT RATIO]

Set the aspect ratio of the frame.

Options
[CUSTOM]	2.39:1	17:9	16:9
5:4	4:3	3:2	1:1

[CUSTOM ASPECT]

Customize the aspect ratio of the frame.

[SCALE]

Adjust the magnification of the frame. Set the magnification of the frame from 1 % to 100% in 1 % increments.

[COLOR]

Set the color of the frame.

Options
[BLACK]	[WHITE]	[YELLOW]	[MAGENTA]	[CYAN]

[FRAMELINE]

Set the thickness of the frame lines.

Options
1[(THIN)]	2	3	4[(THICK)]

[MASK SETTING]

Set how the areas that are not captured are displayed.

[MASK DISP]

Set whether to mask the areas that are not captured.

Options
[ON]	[OFF]

[MASK FRAME SELECT]

Select the type of mask display.

Options
[FRAME1]	[FRAME2]	[FRAME3]

[MASK TRANSPARENCY]

Set the transparency of the mask display. The transparency can be adjusted between 10 % and 100 % in 10 % increments.

[CENTERMARKER SETTING]

Set the center marker.

[CENTERMARKER DISP]

Set whether to display the center marker.

Options
[ON]	[OFF]

[CENTERMARKER PATTERN]

Set the type of center marker.

Options
[PATTERN1]	[PATTERN2]	[PATTERN3]	[PATTERN4]

[COLOR]

Set the color of center marker.

Options
[BLACK]	[WHITE]	[YELLOW]	[MAGENTA]	[CYAN]

[FRAMELINE]

Set the thickness of the center marker lines.

Options
1[(THIN)]	2	3	4[(THICK)]

[ELECTRONIC LEVEL SETTING]

Adjust settings for use when recording movies using the virtual horizon display.

Option	Description
[2D]	A white line shows the amount the camera is tilted left or right. The line turns green when the camera is level. The line may vanish if the camera is tilted forward or back.
[3D]	The display shows whether the camera is tilted left or right and forward or back.
[OFF]	The virtual horizon is not displayed.

[REC FRAME]

If [ON] is selected, the borders of the display will turn red during movie recording.

Options
[ON]	[OFF]

[DISP. CUSTOM SETTING]

Select the items to be displayed on the LCD monitor in shooting mode.

The available items are as follows:

[AF FOCUS FRAME]
[MANUAL FOCUS FRAME]
[AF DISTANCE INDICATOR]
[MF DISTANCE INDICATOR]
[FOCUS MODE]
[FOCUS INDICATOR]
[PHOTOMETRY]
[SHUETTER]
[IRIS]
[EXP. COMPENSATION]
[ISO]
[ND]
[WHITE BALANCE]
[IMAGE FORMAT]
[RESOLUTION]
[PROJECT FPS]
[RECORDING FPS]
[FILE FORMAT]
[MEDIA REC SETTING&MOVIE COMPRESSION FORMAT]
[CROP MAGNIFICATION]
[LOOK MEDIA]
[LOOK LCD]
[LOOK SDI/HDMI]
[CLIP&REEL]
[CAMERA STATUS]
[REC. TIME]
[Genlock]
[TIME CODE]
[COOLING FAN]
[IS MODE]
[SELF-TIMER]
[MIC LEVEL]
[Bluetooth STATUS]
[Wi-Fi/Ethernet STATUS]
[REMOTE REC FUNCTION STATUS]
[Frame.io STAUS]
[IMAEG TRANSFER STATUS]
[MEDIA RECORDING TIME]
[BATTERY AGE]
[EXTERNAL BATTERY INFO]
[TOUCH AF OFF BUTTON]
[POWERZOOM]
[GUIDANCE MESSAGE]

[FOCUS SCALE UNITS]

Choose the units used for the focus distance indicator.

Options
[METERS]	[FEET]

[LCD INVERSION SETTING]

Flip the LCD monitor display vertically and horizontally.

Option	Description
[NORMAL]	The display is not flipped.
[INVERSION1]	The display is flipped both vertically and horizontally.
[INVERSION2]	The display is flipped horizontally.
[INVERSION3]	The display is flipped vertically.