.[IMAGE QUALITY]
Adjust image quality settings.
[TONE CURVE]
With reference to a tone curve, adjust the appearance of highlights or shadows, making them harsher or softer. Choose higher values to make shadows and highlights harsher, lower values to make them softer.
| Option | Description |
|---|---|
| [HIGHLIGHTS] | -2 to +4 |
| [SHADOWS] | -2 to +4 |
[COLOR]
Set the color density of the footage. Choose higher values to make the footage color more dense, lower values to make it less dense.
| Options | ||||||||
|---|---|---|---|---|---|---|---|---|
| -4 | -3 | -2 | -1 | 0 | +1 | +2 | +3 | +4 |
[SHARPNESS]
Sharpen or soften the outlines of the footage. Choose higher values to sharpen outlines, lower values to soften outlines.
| Options | ||||||||
|---|---|---|---|---|---|---|---|---|
| 0 | +1 | +2 | +3 | +4 | +5 | +6 | +7 | +8 |
[NOISE REDUCTION]
Reduce noise in movies shot at high sensitivities. Choose higher values to reduce noise and smooth outlines, lower values to leave outlines visible.
| Options | ||||||||
|---|---|---|---|---|---|---|---|---|
| 0 | +1 | +2 | +3 | +4 | +5 | +6 | +7 | +8 |
[INTERFRAME NR]
Select [AUTO] to automatically adjust interframe noise reduction according to shooting conditions.
| Options | |
|---|---|
| [AUTO] | [OFF] |
“Ghosting” may occur with moving subjects or if the camera is moved during shooting.
[MONOCHROMATIC COLOR]
Add a reddish or bluish tinge (warm or cool color cast) to the a[ACROS] and b[MONOCHROME] monochrome film simulations. Color can be adjusted on the [WARM]–[COOL] and [G] (Green)–[M] (Magenta) axes.
| Option | Description |
|---|---|
| [MC] | -18 to +18 |
| [MG] | -18 to +18 |
[F-Log2/ C D RANGE PRIORITY]
Choose whether to make the dynamic range wider when shooting F-Log2 movies with movie format set to [GF] or [Premista], resolution set to [4K17:9] or [4K16:9], and a frame rate of 30 fps or less. The rolling shutter effect may occur when this setting is enabled.
| Options | |
|---|---|
| [ON] | [OFF] |
