Enter a search term and click .

Connecting to the Network

When using network functions, you must configure the settings for network connection in advance.

Connecting via Wireless LAN

You cannot connect to a network in the following cases:

  • When the wireless LAN function is turned off.
  • When the camera is powered only by the supplied battery.

Connecting to a Detected Network

Select a network from those that the camera automatically detected to connect to.

  1. Select [NETWORK] > [WIRELESS LAN].

  2. A list of automatically detected networks is displayed.

    Select the network you want to connect to.

    Press [ON/OFF] (Screen button 4) to enable or disable the wireless LAN function.

    Press [ADD] (Screen button 6) to connect to a network that is not displayed (aConnecting to a Network Manually).

  3. Enter the network password.

  4. The camera connects to the network.

Connecting to a Registered Network

Networks once connected will be registered on the camera. Select a registered network to connect to or adjust the settings.

  1. Select [NETWORK] > [WIRELESS LAN].

  2. A list of automatically detected networks is displayed.

    Select a registered network.

  3. Select [CONNECT TO NETWORK].

    Select [PASSWORD] to change the registered password.

    Select [IP ADDRESS SETTING] to switch between automatic and manual IP address assignment. For manual assignment, use [MANUAL IP ADDRESS SETTING] to enter the IP address, subnet mask, gateway, and DNS server information.

    Select [DELETE NETWORK] to delete the registration information for the selected network.

  4. The camera will be connected to the network.

Connecting to a Network Manually

Manually register network information and connect to networks that do not appear on the automatic detection list.

  1. Select [NETWORK] > [WIRELESS LAN].

  2. A list of automatically detected networks is displayed.

  3. Press [ADD] (Screen button 6).

    Press [ON/OFF] (Screen button 4) to enable or disable the wireless LAN function.

  4. The method for adding a network is displayed.

    Select [ENTER SSID AND ADD].

    Select [ADD USING WPS BUTTON] to press the WPS button on the wireless LAN router and connect to the network.

  5. Select [SSID] to enter the SSID.

    Enter the network SSID on the input screen.

  6. Select [PASSWORD] to enter the password.

    Enter the network password on the input screen.

  7. Set the IP address assignment method.

    • Select [AUTO] to allow the camera to automatically obtain an IP address.
    • When [MANUAL] is selected, use [MANUAL IP ADDRESS SETTING] to enter the IP address, subnet mask, gateway, and DNS server information.

  8. Select [DONE].

    The camera will be connected to the network.

Connecting via Wired LAN

The camera cannot be connected to a network when the camera is powered only by the supplied battery.

  1. Connect the camera to a network using a LAN cable.

  2. Select [NETWORK] > [WIRED LAN SETTING].

  3. Set the IP address assignment method.

    • Select [AUTO] for [IP ADDRESS SETTING] to allow the camera to automatically obtain an IP address.
    • When [MANUAL] is selected for [IP ADDRESS SETTING], use [MANUAL IP ADDRESS SETTING] to enter the IP address, subnet mask, gateway, and DNS server information.

  4. The camera will be connected to the network.